Everything went fine this morning on the Install. Then the box said there were 121 updates. I click YES to update. After an hr updates had finished, and reboot was necessary. Only a black screen came up. I have 2 lights on my keyboard blinking, no hard drive activity light. Waited several minutes, nothing. So I did a reboot back into my WinXP. Any suggestions?
View 2 RepliesI have a Acer Aspire D250 the new ones that comes with the win 7 starter kit.
When I try to install or just even try to load from the live CD from Ubuntu 9.10 or Ubuntu 9.10 remix the logo come up and screen goes black. I'm using a 4gig Sanddisk cruzer and I formated to fat32.
Is it an option that I need to change into the bios? do you think I really need to use a external DVD to install it?
I tried to find a solution on google but can't find anything
I have an Acer Aspire One AOA110 that came with Windows XP.
I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).
Before install, I was able to run Ubunut from the usb key with no problems.
At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies View RelatedI had VNC working with accounts that were logged in. Then I went thru the procedure for vnc-itsp-config (step 5 of the how-to-centos5 vnc server wiki) so that I could log in remotely to an account that was not already logged in.
All went well until....I tried to log in and all I get is this X11 window with a X cursor and a black screen.
I have restarted the vncserver service but I suspect it is a x11 issue (just a guess).
As a newcomer to Linux I recently installed F12 (2.6.31.5-127) from a full installation DVD and all worked well until I decided to download a bunch of updates. When I next booted up I had a second kernel (2.6.32.9-70) and the usual other option for my XP dual boot (which still works!).Selecting either kernel leads to the Fedora logo on a blue screen and then a black screen with a small underscore cursor in the top left and no other text. This is not a command line or a text editor but it simply displays key depressions - the alpha/numeric section of the keyboard in upper and lower case as normal and then the function keys and numeric key pad as control codes commencing with As both kernels yield the same behaviour, am I right in assuming that it is one of the program updates that is causing the problem? The only way I have found to get out of this screen is ctrl.alt.del which gives a short list of programs being stopped and then the machine reboots. I don't know how to pause this screen to get the details before they disappear.I have been through loads of stuff on this forum but nothing seems to fit. From the command line terminal off the boot options screen I tried su -c yum clean all and also yum clean all but all I get from Grub is error 27 unrecognised command.
As you can tell I'm a complete beginner, but I am willing to learn. The thing is I don't know where to go from here. All I want for now is to get back to the Gnome environment I can handle, then I can explore the command line at my pace instead of being thrown in at the deep end!
I'm running Fedora 13 64 bit. Everything has worked fine, until today. The latest updates killed the video.
As the bar at the bottom of the screen starts to go across and say Fedora 13 the whole bar starts to flash then goes solid white. No errors or nothing, just a black screen. What causes this?
Nvidia drivers are installed. Maybe it's them. I've had trouble with video after updates with the last 4 versions of Fedora.
How to fix this mess?
I had a perfectly well running CentOS 5 system but with an old crappy monitor. I replaced the monitor by a bigger one, i did a monitor detect to make sure that CentOS would recognize the highest possible resolution. Then changed the display rsolution for the current user.
Now when i login as root just a black screen appears with a white mouse pointer and then nothing. I already deleted all the contents in the home directory /root but no improvement.
When i login as a new user X is starting perfectly.
Anyone have a clue what i need to do or delete to get X working again? I can nuke the whole box and do a reinstall but i'd rather not.
After finally getting flash taken care of, now after reboot I have a black screen and this error:
Fatal Module - nouveau not found.
How do I get the video working again? What would the command be?
running Debian Squeeze 64bit. nvidia 6100
Update Manager comes up with 247 downloads, but when I hit Install Update I get a white screen and nothing happens. I have just installed 9.10.
View 5 Replies View RelatedTwo days ago I downloaded and installed new updates after upgrading from 10.04 to 10.10. After the update I was informed I needed to restart. Once my laptop booted up again it stayed to a black screen and then filled up with error messages like something about trace call or call trace?
I had no way to get into my system but I did have some minor success starting in an old kernel. However after a while it would freeze like the graphics driver was going wrong.
Two attempt later of reinstalling 10.10 from disc after deleting the drive content and after updating it would go back to the same.
So I have now disabled updates as I haven't a clue on which one(s) is causing these problems.
I am on a HP Pavillion dv7 with nVidia graphics card and running 64amd Ubuntu.
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View Related'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies View RelatedAfter succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedanother post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies View RelatedI did an upgrade and now after grub starts I get nothing but a blank screen. I should have left the well working alone. Any suggestions on what to do? I have no terminal, nothing any longer.
View 6 Replies View RelatedProblem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
I have spent the better part of 2 days perusing these forums for assistance. Here is the short story:I run a 7 year old custom build with a 82865G Intel Chipset and a NVIDIA FX5200 graphics card. Had been running a sluggish XP and after adding 2GB of fresh RAM wished to start fresh with my old friend, Ubuntu.
I've tried 10.04 LTS with and without my NVIDIA card installed with no luck. I have successfully installed 10.04 using the alternate install, but this also goes to black. I can hold shift to see GRUB and play around there, but no luck so far. I've also tried 9.10 but have not gotten past the pulsing Ubuntu image. I've seen plenty of support for NVDIA and Intel onboard graphics chips suggesting boot commands like nomodeset and i9015.modeset=0/1...it's all falling short.
I'm heavily leaning towards just installing an earlier LTS or a different linux distro all together. If there no one can help me debug, maybe someone can suggest a distro that will make me happy.
I've installed ubuntu 10.04 onto my Dell Latitude e6510 (through the wubi installer), but I can't get anything except a black screen. I'm pretty new to ubuntu, but after a bit of looking around at graphics issues I found a bunch of boot parameters and tried different combinations of them. i915.modeset=0 Gave me the purple loading screen, until the screen went black and I got flashing caps lock and scroll lock lights.xforcevesa gave me a completely black screen -- not receiving power at all
I also tried noapci, acpi=off, irqpoll, and pci=routeirq as parameters. None of those had any success.I've also tried letting ubuntu boot with a black screen until I heard the African drums and pressing Ctrl+Alt+F1 to go into the console, but the screen stayed black then as well.
I have downloaded Last version of Ubuntu 11.04 and installed it. The installation went correctly with some flickering in display during installation. But the real problem starts after installation, when I turn on my PC and select Ubuntu from GRUB, the screen flickered a lot and then went black and PC got hanged.
View 5 Replies View Relatedeverytime i try to install ubuntu 11.04 the screen is just black is there any fix for this ?
View 6 Replies View RelatedAfter the upgrade from 9.10 to 10.04 resulted in a black screen after reboot, I decided to don't waste more time, backed up my data and made a fresh installation.
First Issue [solved]: After I inserted the Kubuntu 10.04 Live-CD and started the system, I got to the CD's boot-mode selection menu. When I selected "Install Kubuntu", I got the Kubuntu bootscreen, but the system hang up then. I was able to solve this problem through pressing F6 in the boot-mode selection menu and setting "nomodeset". I also had to remove "quit splash" from the boot-entry line. Afterwards the installation process was fine.
Second Issue: I wanted to boot my new installated system, but, off course, got the blank screen again. So I edited the Grub-entry for recovery mode in the grubmenu (replaced "quit splash" with "nomodeset") and booted into recovery mode. I selected "netroot", and installed the proprietary nvidia-drivers with "apt-get install nvidia-current". Afterwards I ran "nvidia-xconfig" to generate the xorg.conf. To solve the blank screen issue, I edited the /boot/grub/grub.cfg the same way I described above and rebooted. Now I don't get a blank screen anymore, but I also don't get an XServer. The system boots now (off course without splash and "unquit"), but drops me into the tty1... When I type "sudo service kdm start", I get into KDM and can login, but I get many errors and crash-reports there. I also don't have any internet. I only have internet when booting in recovery mode and select "netroot".
I'm a bit surprised that Ubuntu released a LTS-Version that causes so much trouble (I've searched the forum and it seems that I'm not the only one with such big problems). Has Ubuntu droped support for NVidia-users?
I have been having trouble with my updates, specifically these code...
When I try to install these updates I get the following error message code...
I tried to install Ubuntu 9.10 on one of them by default installation. For the moment there is only one user declared. The installation seems OK, except that Ubuntu didn't find my PPPoE connexion. When I logged in, I got a blank screen with the mouse cursor (it moved, but when I left or right-clicked nothing happened) and on the left something looking like two 1-pixel wide menus, as if the system had understood there were a dual screen. These menus could roll and unroll, and I think I even once managed to shutdown by going to the last invisible item thanks to the keyboard arrows (I'm not sure, because I had also clicked on ctrl+alt+suppr, so it could be a delayed effect of that).
I restarted the computer several times, to get no more than that. When I'm in Gnome safe, everything is OK but I don't have any root privilege there (I guess it's normal): for instance, I can't set up the internet connexion. My 20" 4/3 Philips screen is recognized. Then I changed the screen frequency: it's still OK for Gnome safe session, but now, in the Gnome normal session, instead of a black screen with 1-pixel wide menu, I get a black background picture with white light coming from above and reflecting to an otherwise invisible floor. The mouse cursor is moving, but this is the only thing which works.
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
So I decided to upgrade from 9.04 to 9.10 today, I was quite sure there wouldn't be no problems. Well, at least not in the installation, and apparently the system works well too, but there's just one thing...When I boot to the new kernel (2.6.31-19), it does show the new white Ubuntu-logo, but after it's gone, some text flashes through extremely fast, and after that the screen turns black, having two small and white horizontal lines on top of the screen. Soon after this, I can hear the login-window sound. I can log in by pressing enter, and then typing my password, and soon after I press enter again, I can hear the login sound. But still, the screen is black, having those same white horizontal lines on top of the screen, making the use of computer "quite" hard.Right now I'm using the older kernel, but the problem is that the sounds won't work, the resolution is still low like when I had 9.04 (problems with Intel hardware), and CD's won't still be read when inserted into the CD-drive.Here's my "lspci" in case someone wants to know of my hardware a little:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev
[code]....
I just Installed Ubuntu on my PC (win XP-pro) using wubi, by downloading the .iso from webpage and burned it to cd. The installation went fine, but when I login the screen goes black. I can still see my mouse pointer and one vertical pixel line of the desktop. Could it be the graphics drivers, if so how can I update/change them, via rebooting in safe mode and using command line?
View 2 Replies View RelatedToday I just tried a liveCD of lucid beta2. Unfortunately,just like with alpha5, all I got was a black screen, and nothing else. I tried to switch to terminal with crtl-alt-F1,F2... but it seems to be disabled (why?) I am running 9.10 on a Samsung r20 notebook, with an ATI-Radeon Xpress 1250. Since 10.4 is about to be released, and I really want to upgrade.
View 5 Replies View RelatedI was prompted to do the upgrade and I did it. I was working and was at a point I could restart as asked, and I did. Now I have a black screen and can't get anywhere. I have downloaded the liveCD for 10.04 and this is a massive failure. All I have is about a .25 inch wide space that I have any video of. And this is trying to just run from the disc or trying to do a clean install.
I am getting pretty aggravated and ready to scrap the whole system and re-install 9.10 if necessary. The ONLY thing I see is the new Kubuntu loading screen. Nothing else.