Ubuntu Installation :: Shows Multiple CPU Overtemp Messages And Freezes With Totally Black Screen
Jan 20, 2010
I burnt the Ubuntu 9.10 ISO to CD and installed on a freshly nuked Dell 2350. It is pentium 4 at 1.8 MHZ with 512 RAM. Just a spare machine I have sitting there. Install went fine, restarted box, boot from hard drive. I get the little white Ubuntu symbol on a black screen and then a black screen with un-occupied white tool bars at top and bottom of screen and a functional mouse pointer, then nothing. It freezes there.
If I restart by holding the power switch in it occasionally shows multiple CPU overtemp messages and freezes with totally black screen. I can run the CD live and everything works like a champ. I'm going to like Ubuntu once I have this sorted out. If I boot from CD and choose the run from first hard drive option, everything loads and works fine. I was able to remove CD, update and save preferences, etc..
On one occasion, I was able to restart and boot from hard drive and it worked fine but usually it freezes at previously mentioned black screen with white bars top and bottom with mouse pointer. Please excuse my ignorance as I have very little knowledge of the inside workings of computers. I didn't even know about burning ISO's or changing boot orders until reading online. For what it's worth, the computer worked fine with no known hardware problems when it was running XP. It also is completely stock with no mods or added/replaced hardware.
View 4 Replies
ADVERTISEMENT
Sep 30, 2010
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
View 2 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
Sep 1, 2011
I installed 11.04 on a t420 Thinkpad, and sometimes it suspends normally, but sometimes it cuts to a black screen with white text (attached) and won't finish suspending, making me do a hard reboot.
I tried to fix it by using s2ram, but that did not solve my problem.
View 2 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
May 15, 2011
I've been unable to resolve this problem for the past weeks and have come as far as I can trying to fix it on my own. I have a fresh install of 11.04 on a Shuttle ST20G5 with a Radeon Xpress 200g chipset. After 5-10 minutes of usage in X, it freezes solid (no response to alt-sysreq) and displays a white screen (sometimes with a pattern). I believe it's a kernel issue.
Things I've tried but still resulted in crashes:
- Switching to VESA graphics
- Running failsafe / Recovery Console X
- Downgrading X server to 2.09
- Running latest X server via ppa (at least, I think I did this. Maybe I didn't)
- Upgrading kernel to 2.6.39-0 via ppa
- Running the live cd
I get no warnings or errors of note in xsession-errors or kern.log
I have not been able to catch the error or obtain any troubleshooting info. When it crashes, it just crashes.
View 3 Replies
View Related
Jul 20, 2010
I have a laptop Toshiba a65 s-1067 and i just installed ubuntu 10.04 but after updating the files that update manager said i restarted the laptop but now its not booting the gui it just shows a black screen with text going then it apears the logo of ubuntu in dark red backround with some text that i cant read cuz it disapears fast.. after this the screen just goes blan (dark red) and presing ctrl + alt F1 or F8 or anything doesnt work generaly no key works.
View 1 Replies
View Related
Mar 19, 2010
whenever i open my kubuntu desktop it brings a black screen. the pointer of the mouse is active but i cannot see anything.but my gnome desktop works well.what might be wrong?
View 5 Replies
View Related
Jun 11, 2010
I have a Logitech Quickcam Chat webcam (USB ID 046d:092c) that's worked with my Ubuntu with minimal problems (just some nVidia driver crap) for ages now. I'm not using nVidia anymore (Intel now), but since my fresh install of Lucid, my webcam doesn't seem to capture anything. It is detected by lsusb, but when I open Cheese, the picture is just black. Skype doesn't give me any video at all, not even that annoying static or green lines. Clicking the Test button in my Skype Options undedoesn't do anything;double-clicking it gives me a full-screen grey screen - pressing Escape takes me back to the preferences window. After I get the grey full screen and press Escape, the Test button is gone until I close the Options window and open it up again.Going into gstreamer-properties and testing v4l2 (under Video -> Default Input) just shows me the 'Testing ... Click Ok to finish' window for ages until I close it - no video appears or anything and I'm not entirely sure what I'm supposed to be seeing. Testing with the 'Test Input' option does give me the coloured lines and static. Testing v4l seems to make it crash, but no error comes up in the terminal I'm running it from.lsusb output:
Code:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:092c Logitech, Inc. QuickCam Chat
[code]...
View 9 Replies
View Related
Feb 23, 2011
I have a laptop which have vista,fedora 12. Today i have install another operating system ubuntu in my laptop. But when i restart it, it not boot up and show black screen. how to resolve this
View 1 Replies
View Related
Nov 5, 2010
Two days ago I downloaded and installed new updates after upgrading from 10.04 to 10.10. After the update I was informed I needed to restart. Once my laptop booted up again it stayed to a black screen and then filled up with error messages like something about trace call or call trace?
I had no way to get into my system but I did have some minor success starting in an old kernel. However after a while it would freeze like the graphics driver was going wrong.
Two attempt later of reinstalling 10.10 from disc after deleting the drive content and after updating it would go back to the same.
So I have now disabled updates as I haven't a clue on which one(s) is causing these problems.
I am on a HP Pavillion dv7 with nVidia graphics card and running 64amd Ubuntu.
View 1 Replies
View Related
Mar 15, 2010
I'm using OpenSUSE 11.2 64 bit. Sometimes boot fails and I get a black screen. It starts quite normal, but when it tries to start X and KDE, it fails and I only see a black screen. I can't switch to terminal and I can not reboot my computer by pressing "Ctrl + Alt + Del". It doesn't even shutdown by pressing the power-button. The only possibility is to switch off the computer. Then it normally starts.
The problem also occures with a clean installation of OpenSuse. And it cannot be solved by updating kernel, X-Server and KDE.
What files do you need? I'll post them.
The same computer worked fine with OpenSUSE 11.1. I think, the new radeon driver could be the problem, I have to use it because I can not use fglrx anymore as with 11.1
I take a look into my log-files, but I cannot see any error. Sometimes it seems, that /var/log/messages is partly overwritten by restarting the machine.
lspci:
Code:
Code:
View 9 Replies
View Related
Mar 12, 2011
With a default 11.4 (64bit) installation, and the one click installer for VLC at VideoLAN - VLC: Free streaming and multimedia solutions for all OS! - if you get a black screen when watching movie files there are 2 solutions.1)-> Go to Tools->Preferences->Video-> Remove the tick for "Accelerated video output (Overlay)"-> Try and play the movie again, you should now see output.2)Download proprietary drivers for your graphics card - I think theres a thread on the forum dedicated to that.
Example, NVIDIA 8600 using the default 11.4 open source drivers (nouveau?) shows a black screen when VLC uses "Accelerated video output".However, installing the proprietary NVIDIA drivers, VLC will successfully show the movie using "Accelerated video output".To clarify the default VLC installation with "Accelerated video output" ticked - works with proprietary NVIDIA drivers - and doesn't without.
View 5 Replies
View Related
Sep 10, 2010
I'm using ubuntu 10.04 and it worked fine but recently I'm getting the following message -
(process:343) GLib_Warning** : getpwuid_r(): failed due to unknown user id(0).
This message comes with a black screen and then no key stroke works and everything totally freezes. then I've to force restart using power switch. This message appears when I'm using internet. I'm using pppoe broadband connection. Without internet it works fine. I'm getting the same prob in Linux Mint 9. I've googled for this problem and almost everywhere it is said that this message appears in booting time and after a few moments everything becomes quite ok but my problem doesn't match with them. I don't get this message in booting time. I get this message when I'm on internet.
View 8 Replies
View Related
Mar 15, 2010
Once I select Ubuntu 9.10 from Grub, it shows the logo, the logo disappears, a jet black screen shows with 2 horizontal white dashes appear at the top.
I recently uninstalled Firefox 3.6 pre using synaptic to go with the stable Firefox 3.6 installed with the PPA repository that was given in the Ubuntu wiki. It installed and ran fine but when I rebooted, ubuntu wouldn't start.
I went into recovery mode a few times, tried to fix any broken packages and when it said it was fixed, I tried rebooting and the same error occurred. I also tried to use dpkg-reconfigure for the xserver-xorg and then ran startx but x didn't load properly. Some more debugging and a few driver errors came up involving intel so I installed a package which fixed that.
Ran the dpkg-reconfigure again and ran startx. This time x loaded but it was a jet black screen and I had to hold ctrl + alt and hit a few F keys to get back to the prompt.
I understand this could be a xulrunner error so I tried reinstalling xulrunner-1.9.1. I also rolled back my repositories to get the Firefox 3.5 branch and I installed the original Firefox 3.5, ran firefox --version to make sure and I finally have that back installed.
I tried rebooting and running the OS normally, but again it failed at the same point. What exactly should I do next? Yes, I could reinstall but it's such a small problem with maybe 1 or 2 broken packages, is there anyway I can save my current ubuntu system (as I have made countless configuration changes months ago and I do not want to do it again)?
View 1 Replies
View Related
Dec 6, 2010
Well, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
View 9 Replies
View Related
Aug 26, 2010
I have Lucid setup for multi user. Whenever 2 users are logged in and one logs off, it freezes on a black screen. It looks like it logs off OK and is on its way to the main login screen but never gets there. I found some older posts describing this problem but no solution. I tried to post to that thread but got a message saying I was not permitted. I am new to Linux and am struggling to figure out how to problem solve issues in Ubuntu.
View 1 Replies
View Related
Apr 6, 2011
I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?
View 14 Replies
View Related
Jan 18, 2010
openSUSE 11.2 i586, ASUS P3-P5G43 Rev. R1.04G Intel Core2 Duo CPU E8400@3.00GHz, Intel G45/G43 Chipset The Problem: The screen is for the WSXGA+ (1680x1050) standard. This resolution was detected, at the initial install and later with sax2. It shows the desktop with a 1 inch wide black area along the right border of the screen and that is exactly what is missing at the left border (i.e. invisible). It is like the desktop is shifted to the left of the screen. As far as it is visible the image is crisp and clean. Lowering the resolution to 1280x960 works ok, but the aspect ratio is no longer correct. I have checked the archives and found Intel integrated graphics - openSUSE Forums but trying different hints from the thread did not help.
[Code]...
View 8 Replies
View Related
Jul 28, 2011
The screen of my years-old HP laptop (running Natty) freezes and eventually turns black. Ctrl-Alt-F# works to switch to the terminals. My fan is even louder than usual. I spend some time fooling around with ps and kill and shut down some of the most resource-consuming processes, which quiets the fan a bit, but tty7 still shows a black screen except for my mouse pointer.
I finally decide to shut it down altogether, but then I think to myself, "Self, you've used the power switch to shut down before in this situation, but shouldn't there be a more proper way to do it in the terminal?" So I try shutdown, I have trouble with it, it proceeds to get hopelessly tangled up, and it looks like it's frozen up in mid-restart when I throw up my hands and decide to go for the old power-switch-for-five-seconds method after all. Now when I start the computer and select Ubuntu from GRUB, I get this:
[Code].....
View 9 Replies
View Related
May 4, 2011
I want to be able to run multiple desktop sessions, but when I goto the next session terminal and type startx -- :2 the screen just goes all black.
View 4 Replies
View Related
Feb 16, 2011
I recently upgrade from Lenny to Squeeze. My graphic card is nVidia Corporation G86 [GeForce 8400M GT] (rev a1). Using lenny latest drivers from nvidia worked fine. I installed nvidia drivers using Debian packages 195.36.31-6 and latest driver from nvidia site (260.19.36) and also other nvidia drivers. The problem is when I start gdm3 I saw nvidia logo but then when it loads gdm3 it shows gdm3 screen with lot of black pixels and other random pixels and then the screen freezes. And the only thing I can do is restart using [alt]+[sysrq]+b.
View 13 Replies
View Related
Dec 14, 2009
I keep starting up the computer and I'm not able to get far (although it's not always at the same time) before my screen will go black, except it shows the mouse/cursor - but it's frozen, and then the caps-lock light starts blinking and I can't do anything or get it to recover. It ONLY occurs after I log in to wireless network. Using a wired connection, this problem never occurs.How do I stop this and diagnose this?I've tried, in the boot-startup to choose an older kernel version, but the same thing occurs! And this was working for months and now is not.
View 1 Replies
View Related
Apr 18, 2009
I just downloaded Fedora 10, burned the CD, installed the program, etc. Everything went just fine, but after rebooting the screen turns gibberish, totally unreadable. I now it's the video card, NVIDIA but how do I fix it? I installed Fedora 8 which worked just great, no issues. My machine is Intel Core 2 7300, Geforce 9600GT my other machine, is AMD-64 5000, Geforce 9500 GT, same problem happens when trying to install Centos 5.
View 5 Replies
View Related
Jan 2, 2011
I installed ubuntu with the windows installer. while installing in windows, multiple error messages showed up, but installation still proceeded.it rebooted, and ubuntu finished installation.on the next reboot,when i chose ubuntu from the windows boot manager, it loaded grub.however,there was no option for booting ubuntu in grub, and you are forced to go back to the windows boot manager.
View 2 Replies
View Related
Jun 29, 2011
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found.
So I used TestDisk again to recover them, this time it was successful. The problem now however is that when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it?
View 9 Replies
View Related
Jun 29, 2011
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
[code]...
View 1 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jun 9, 2011
I have a hp mini 1033cr. Awhile ago I installed ubuntu netbook edition, well I was new to Ubuntu so I clicked upgrade. Well everything was going good and then it restarted. when I came up to the log in page I typed my password and now it won't boot. it goes to the desktop theme but then freezes with three warning messages.
1st could not update ICEauthority file /home/adam/.ICEauthority
2nd There is a problem with the configuration server. (/usr/lib/libgcond-sanity-check-2 exited with status 256)
3rd Nautilus could not create the following required folders: /home/adam/desktop, /home/adam/.nautilus
I have tried a fresh install with a disc I burnt and ran with my external dvd drive. Well guess what it decided to not boot from it. I have also tried several other discs including a windows xp disc. it always boots back to the hard drive.
View 3 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
