Ubuntu :: Why Does 9.10 Not Detect USB Devices
Mar 1, 2011
I can't access my USB devices via Computer, yet I can generate a list with:
Code:
lsusb
Output:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0a48:5014 I/O Interconnect Mass Storage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 2 Replies
ADVERTISEMENT
Jan 9, 2011
I'm trying to detect an external HDD drive, but I don't know how. My PC has a total of 6 USB ports, they're all being used, and the Computer File Browser lists only 4 USB ports and I can't open them.The ports could be detected in Windows Vista, except I've not tried the new HDD enclosure, but it crashed.
View 5 Replies
View Related
Feb 13, 2011
"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
[code].....
View 14 Replies
View Related
Mar 7, 2011
I bought a new notebook HP Presario CQ56 with Linux openSUSE 11.0 Everything works and the Bluetooth device is ON. Also the one in my cellphone. But the one in the PC does not detect any device and ergo cannot configure it.Got Bluetooth Applet 1.8 installed.In #suse and #bluez IRC chats couldn't give me a hand =/
View 5 Replies
View Related
Sep 22, 2010
Strange to me that a search only seemed to turn up some partial instructions for enabling detection of new USB devices (not discoverable in a default install) in 11.1 and no later. I assume perhaps incorrectly that things have changed since so attempted the following.
Objective: Discover an HTC G1 phone to use as a modem. So, after the phone is discoverable by SuSE the next step would be to configure the connection.
Current: It seems that this phone is listed in /etc/usb_modeswitch.d/
Attempt: I assumed incorrectly it seems that it should have been sufficient to simply create a file in the /etc/usb_modeswitch.d/ directory with the appropriate TargetVendor and TargetProduct codes as follows
Filename: 0bbr:0c01
Code:
########################################################
# HTC Android G1 Phone
DefaultVendor= 0x0bb4
DefaultProduct=0x0c01
[Code]....
I need the proper way to do this in OpenSuSE 11.3. A bonus would be if someone could verify that after the modem/phone is recognized whether the next step is to configure the device using YAST/modem.
View 9 Replies
View Related
Jul 18, 2010
I am running UBUNTU 10.04 on an X86 system 64bit. I am trying install a wireless keyboard and am not having much luck.
-My non wirelessUSB keyboard and mouse work fine.
-My wireless logictech mouse works fine without adding any special drivers/packages
-Wireless Keyboard (LX500, uses same receiver as mouse) does not work with standard config
-Adding HIDPOINT and selecting my wireless mouse and keyboard (LX500) - wireless key board does not work. Mouse still works.Since my wireless mouse worked before HIPOINT installation (64 bit), I believe HIDPOINT is not working.
HIPOINT Does not detect my wireless devices auto, must manually select them. So I believe that there is some conflict with other drivers.Can anyone point be in a direction to look? What are the typical configuation files and drivers used to configure standard USB mouse and keyboards? What are some other software that might be installed that is conflicting with HIDPOINT?
View 1 Replies
View Related
Jun 11, 2009
I've been struggling a bit with install F11. F10 installs without issue. I have two internal SATA drives, a PATA DVD-ROM and a USB drive. The BIOS recognizes everything. However, when I got to the disk partition utility, Anaconda could never detect one of the SATA devices. I tried swapping cables, ports, etc. No luck. Today, I ran across this Bug thread: [URL] I checked the screens Ctrl-Alt-F1-6. Nothing obvious. But, for fun (from the bug thread) I went to the prompt on 2 and ran:
dmraid -r -E It found an "nvidia" RAID "thingy". Forgive my ignorance on what it really is called or what it does. Anyway, I answered yes to erase the "thingy" and voila. I was able to install F11. Not sure if I made a good title, but I've seen bits and pieces of people having similar problems with F11. And BTW, the drive that had "nvidia" on it was from a machine that was using nvidia hardware RAID 0 - but F10 had no problems with it.
View 1 Replies
View Related
Mar 21, 2011
I want to devolep one "C/C++" program that will work as a daemon. My daemon will be running all the time, and whenever anybody attaches removable devices to machine on which my daemon is running, My daemon should catch that event and also should show me where that device has been mounted.
View 1 Replies
View Related
Feb 26, 2011
I'm trying to create a media box for my TV. I've installed a barebones ubuntu from minimal install disc. After that I installed xorg and XBMC. But my usb devices are not automounting. Is there a pacakage im missing? I've read that XBMC should be able to handle mounting of devices and that no window manager or desktop environment is needed to handle this.
I followed these two tutorials and my current install is 10.04 Lucid.
http://forum.xbmc.org/showthread.php?t=38473
http://wiki.xbmc.org/?title=XBMCbuntu
Current version of XBMC is 10.0
View 2 Replies
View Related
Jul 1, 2011
I'm not 100% if that's what it says, because it goes by in like a second.
But when I boot up my computer, the screen stays black for a while, then gives me that error. But then it loads up Ubuntu successfully with no problems.
I was just hoping to fix this, because it causes it to take a while to boot up.
View 5 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
May 2, 2010
I have a new F12 install, and my syslog is filling up with messages about USB. I have 2 USB devices plugged in directly to the mobo (bluetooth keyboard receiver, touchscreen), and it keeps redetecting them and then disabling the port for some reason.
A small sample of what keeps on repeating:
Quote:
View 1 Replies
View Related
Jan 12, 2010
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
View 5 Replies
View Related
Dec 7, 2010
I'm working on a server and noticed that the to RAID5 setup is showing 4 Raid devices but only 3 Total devices. It's on a fully updated CentOS 5 system that only has three SATA drives, as it can not hold anymore. I've done some researching but am unable to remove the fourth device, which is listed as removed. The full output of `mdadm -D /dev/md2` can be see below. I've never run into this situation before.Anyone have any pointers on how I can reduced the Raid Devices from 4 to 3? I have tried
mdadm /dev/md2 -r failed
mdadm /dev/md2 -r detached
but neither work and since there is no block device listed I'm not quite sure how to get things back in sync so it's only seeing the three drives.
/dev/md2:
Version : 0.90
Creation Time : Tue May 25 11:07:04 2010
Raid Level : raid5
[code]....
View 8 Replies
View Related
Feb 12, 2010
I would like to disable USB devices,so that i can restrict copying files from my system...How to do this?
View 5 Replies
View Related
May 25, 2010
I'm running Lubuntu 10.04 on a Thinkpad T41. I had been running for a week before realizing that my USB devices (card reader and thumb drive) were not being recognized. I thought that the issue might be related to my aging Thinkpad but I installed the hard driveat is running Slackware and I had no issues with USB devices. I reinserted the hard drive with Lubuntu and was unable to recognize any USB devices.Has anyone else noticed this issue? If so, is there a fix for this issue?
View 9 Replies
View Related
Jun 19, 2010
For some reason my USB devices just stopped working. I'm on my laptop, so I really don't need a USB Mouse but I like to use it. I also can't use my flash drive. The Command lsusb sees it. It will see both the mouse and my flash drive. I don't have any other devices to test, but I would like to know that they would work when I need them. The strange thing is it also used to work. I don't know what changed.
View 9 Replies
View Related
Mar 15, 2011
usb devices inserted after bootup aren't being automounted and opened. For the life of me, after much googling, I can't get them to work. the ehci_hcd, uhci_hcd and ohci_hcd modules are not loaded, but those were from some old posts, and I don't know how relevant they are to me.But if I insert the usb before startup, ubuntu now recognises and automounts any usb device.before the recent kernel update ( **.2 my wifi dongle would be recognised. but after,it seems as it too isn't being recognised.for the meantime, I am keeping a small unused usb device plugged in the back of the tower.
View 7 Replies
View Related
Aug 6, 2010
I have problem with Ubuntu 10.04 and DP43BFL motherboard.
In PCI port i have two LPT card, but in Ubuntu i can't see it. Windows on the same computer show this devices, but Ubuntu don't.
lspci
Code:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
[Code].....
View 1 Replies
View Related
Feb 3, 2010
When copying files to USB storage of any sort, Nautilus has started hanging after a few files (varies from 1-200 files and a few MB to over 5GB on various occasions), failing to unmount the device, and eventually throwing up an I/O error and freezing.
If I kill/restart Nautilus and reconnect the device it can still be read but comes up as read-only. I can't copy files to the device again, and attempts to erase and reformat it fail in both Ubuntu and Vista. Oddly enough XP will reformat the device, after which it works properly again.
Please help! I could deal when it happened to my USB key but I just bollocked my mate's portable drive and he's a bit pissed off Seems to be happening on all my USB ports.
View 7 Replies
View Related
Mar 2, 2010
Not long ago I lost all sound, but I got it back eventually-the system wasnt snesing my usb speakers.
Now its stopped recognising them again and I cant remember how I got it back before.
How do I find a list of USB devices?
View 7 Replies
View Related
Mar 4, 2010
I am just getting started with Ubuntu and love it so far. It has breathed new life into an old Compaq Presario V2000 and once I get up to speed on it I hope to start running it on all the rest of our machines.
The only major problem I am having is that none of the USB devices I have plugged in are being detected. From what I have seen online I should be getting a notification and should be able to view the devices at Places/Computer but so far, nothing. Googling this problem it appears that individual devices often don't work but I could not find anything on all USB devices not working.
Any ideas as to what I am doing wrong here?
View 1 Replies
View Related
Apr 5, 2010
Jaunty is fully updated but SUDDENLY is not recognizing external devices (card reader, camera, DVD inserted in drawer, etc.) In other words, I cannot see my media and, therefore, cannot open it.
Anybody else having problems here? What's up? Did something go wrong in the updates?
(AMD64 running stable Jaunty 9.10 fully updated)
View 3 Replies
View Related
Apr 27, 2010
I have a usb bluetooth dongle I've connected to my machine. The device appears just fine and using hcitool scan I can scan for device with no trouble. However blueman doesn't seem to register the device even when I force the applet to display and try add a new device it won't scan/see any of the bluetooth devices. Has anyone come across something similar or would know how I should proceed?
View 2 Replies
View Related
May 6, 2010
I have just installed 10.04 as an upgrade from 9.10.
I am having difficulty because none of the USB drives I am using are unmounting as they should be. normally speaking when erasing data from my USB key when you come to unmounting it it will ask if you would like to send this data to the recycle bin thus giving you back the extra storage space on the device. 10.04 isnt allowing me to send these items to the recycle bin ad doesn't give the option to do this.
View 3 Replies
View Related
May 29, 2010
i've been having this problem since lucid, in both ubuntu and kubuntu, though im currently running kubuntu wich is why i tagged it that way.I open k3b, and it immediately tells me there's no optical device/drive...Then i "wodim --devices" and it returns
Code:
wodim: Overview of accessible drives (0 found) :
well that sucks, next stop "wodim --scanbus"
[code]...
View 9 Replies
View Related
Jun 11, 2010
I currently own an easyCAP, standard definition capture device. I'm looking into purchasing a HD capture device, but the only one which says it supports Linux in the spec is the Blackmagic Intensity Pro (PCi Card). Here is a list of the ones which I'm looking into possibly getting, but I'd like to know if I can use it to record (my Xbox 360) on Ubuntu (Studio) 10.04 Lucid Lynx, and how hard it would be to set it up.
Blackmagic Intensity Pro
Hauppauge HD PVR
AVerTV HD DVR
Blitzbox HD
Also, if you know of any other decent HD capture devices, comment and let me know
View 1 Replies
View Related
Sep 4, 2010
I just bought a Nokia N900 and it's a beautiful device!
Naturally, since it runs Linux, it's unable to synchronize with other Linux devices. It's one of those wacky universal constants you can't seem to understand.
I've tried using SyncEvolution, which supports funambol, but it does not work. It keeps complaining about a failed authentication or whatnot.
View 1 Replies
View Related
Sep 8, 2010
basic script on unmounting devices, as that option was removed in Ubuntu Lucid?I'm aware I can possibly recompile the nautilus source and all that, but I think a much easier method would be to just add a script for such. Something basic, like this, but that includes ALL devices that can be unmounted (such as flash drives, external hard drive, and sd/xd cards), not just disc drives. Pretty much what the right click 'Unmount' option in nautilus used to be like:
Code:
#!/bin/bash
sudo umount /dev/sr0
View 9 Replies
View Related
Sep 14, 2010
Was just wondering if it was safe to run devices off of an unpowered USB-hub, unfortunately I do audio production and when the DC-adapter is connected I get horrible alternating hissing noises through the sound system. Was just wondering if it would be safe to connect an external mouse, keyboard and a self-powered printer to the usb-hub without drawing too much current and wrecking the system.
View 6 Replies
View Related
