Ubuntu Multimedia :: Can't Detect USB Devices On Minimal Install / No Window Manager - Sort It?
Feb 26, 2011
I'm trying to create a media box for my TV. I've installed a barebones ubuntu from minimal install disc. After that I installed xorg and XBMC. But my usb devices are not automounting. Is there a pacakage im missing? I've read that XBMC should be able to handle mounting of devices and that no window manager or desktop environment is needed to handle this.
I followed these two tutorials and my current install is 10.04 Lucid.
http://forum.xbmc.org/showthread.php?t=38473
http://wiki.xbmc.org/?title=XBMCbuntu
Current version of XBMC is 10.0
View 2 Replies
ADVERTISEMENT
May 15, 2010
I have installed the debian lenny base system in my old pc. I want only a minimal system with a small window manager like icewm and firefox to surf the web. What I need to write now in text mode to install this minimal system?
View 9 Replies
View Related
Sep 18, 2010
trying to set up a very minimal X on my 10.04 64 bit version of Ubuntu running nothing but Open SSH and acting as a firewall/router, making a PPP connection. The reason, is that I want to set up KVM/Qemu and run a virtual machine. The virtual machine will have a graphical environment and will be connected to my TV so that I can watch movies, stream TV etc. using it. So far, I have done the following:
sudo apt-get install xserver-xorg xserver-xorg-core miwm
When I try to run miwm the error message is:
(null): can't open display.
I have no DISPLAY variable set, but even when I set one myself using export DISPLAY=:0.0 it makes no difference.
View 9 Replies
View Related
Mar 1, 2011
I can't access my USB devices via Computer, yet I can generate a list with:
Code:
lsusb
Output:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0a48:5014 I/O Interconnect Mass Storage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
View 2 Replies
View Related
Jun 14, 2011
I am trying to install clfswm. I am able to run it from a tty. I start a new X server with
Code:
startx xdm --:1
Then in the new X server, I run
Code:
clisp -K full full /home/seb/Downloads/clfswm-1102/load.lisp
[Code].....
It just doesn't work. Actually, I get an entry in the session selection thing, but when I try it, the login screen disapears a sec or two, and then comes back. If after that I try to open a session with another window manager/desktop manager I get a black screen (with a few things in it) that looks like clfswm, but I can't do anything in it.
I have only used kde and gnome until now, and installed openbox to try to see how it works) so I don't know what to do right now.
In case it helps, the installation instructions. I didn't try putting the said line in my $HOME/.xsession or wherever it should be because I thought it would replace the kde login (and that is not what I want). I think what I want is a .desktop file in /usr/share/xsessions/, I'm just not sure what to put in it.
View 2 Replies
View Related
May 22, 2010
xdm which refuses to load a window manager. I run Debian squeeze. xdm tries to execute /etc/X11/xdm/Xsession, which is actually an empty file, and fails with the error 'too many open files'. Afterwards xdm terminates the session and executes Xreset. Here the entries from the log:
Sat May 22 11:27:19 2010 xdm info (pid 2246): sourcing /etc/X11/xdm/Xsetup
Sat May 22 11:27:23 2010 xdm info (pid 2246): sourcing /etc/X11/xdm/Xstartup
Sat May 22 11:27:23 2010 xdm info (pid 2275): executing session /etc/X11/xdm/Xsession
[code]....
I was unable to find anything valuable concerning this problem. This is kind of annoying because I always have to switch to a console, stop X and startx X manually using startx. Then everything works out just fine. Unfortunately I am not yet that familiar with the setup process of X.
View 14 Replies
View Related
Aug 20, 2010
I want to know which packages from "x" set (slack 13,.1) have to be installed for X server to work. Requirements are really minimalistic. Only English language, no X development, no hardware acceleration, etc.
View 6 Replies
View Related
Jan 9, 2011
I'm trying to detect an external HDD drive, but I don't know how. My PC has a total of 6 USB ports, they're all being used, and the Computer File Browser lists only 4 USB ports and I can't open them.The ports could be detected in Windows Vista, except I've not tried the new HDD enclosure, but it crashed.
View 5 Replies
View Related
Aug 16, 2011
In the murky world of X11, window managers, session managers and desktop environments I cannot seem to figure out how to achieve the following in Squeeze:
1. Leave Gnome installed, but prevent it from launching when typing startx
2. Have both X11 and my prefered default window manager (blackbox) startup when I type startx (or similar)
My ultimate goal is to leave Gnome installed but "dormant" and when I do a remote ssh -X be able to use X11 forwarding with blackbox.
View 3 Replies
View Related
Jan 8, 2011
i have fedora 13.i want to play with the X window system.so i want to install a new window manager other than kwin,metacity,twm&mwm..please guide me..and give me the source for X window tips and tricks..
View 3 Replies
View Related
Jul 8, 2011
I try to install two window manager under openSUSE 11.4 x64. AmiWb and WindowLab. I compiled them and there were no errors, but they don't show up in the login menu. If i start them by switching ALT-F2 i can't connect to the xserver. As far as i can see, it is not in USR/X11 either. Have to check where it ended up in. But in my previous experience in installing a WM i did not have any problems.
View 4 Replies
View Related
Feb 13, 2011
"Computer" nor "Palimpest Disk Utility" showed anything about the attached devices. However, the command:
Code:
lsusb
outputs:
Code:
Bus 002 Device 004: ID 05a4:9866 Ortek Technology, Inc.
Bus 002 Device 003: ID 04d9:1203 Holtek Semiconductor, Inc. MC Industries Keyboard
Bus 002 Device 002: ID 047d:1029 Kensington Mouse*in*a*Box Optical Elite
[code].....
View 14 Replies
View Related
Oct 20, 2010
as per the title - after a hard disk failure got new disk and attempting dual boot of xp and 10.10 - had to burn 10.10 twice to get it to complete the install process, but thats another story - basically on logging in there is now gnome panels - i get my 'low battery' warning etc and the login music but thats it - it does work in 'safe mode' though - what can i do to correct this?ironically had exactly same problem on the upstairs desktop when upgrading to 10.4 but buggered if i can remember how i fixed it - even checked my previous posts on it.
View 9 Replies
View Related
Mar 10, 2011
How would I add a window manager to the gnome sessions menu on debian squeeze please? The window manager has been compiled from sources.
View 2 Replies
View Related
Mar 7, 2011
I bought a new notebook HP Presario CQ56 with Linux openSUSE 11.0 Everything works and the Bluetooth device is ON. Also the one in my cellphone. But the one in the PC does not detect any device and ergo cannot configure it.Got Bluetooth Applet 1.8 installed.In #suse and #bluez IRC chats couldn't give me a hand =/
View 5 Replies
View Related
Sep 22, 2010
Strange to me that a search only seemed to turn up some partial instructions for enabling detection of new USB devices (not discoverable in a default install) in 11.1 and no later. I assume perhaps incorrectly that things have changed since so attempted the following.
Objective: Discover an HTC G1 phone to use as a modem. So, after the phone is discoverable by SuSE the next step would be to configure the connection.
Current: It seems that this phone is listed in /etc/usb_modeswitch.d/
Attempt: I assumed incorrectly it seems that it should have been sufficient to simply create a file in the /etc/usb_modeswitch.d/ directory with the appropriate TargetVendor and TargetProduct codes as follows
Filename: 0bbr:0c01
Code:
########################################################
# HTC Android G1 Phone
DefaultVendor= 0x0bb4
DefaultProduct=0x0c01
[Code]....
I need the proper way to do this in OpenSuSE 11.3. A bonus would be if someone could verify that after the modem/phone is recognized whether the next step is to configure the device using YAST/modem.
View 9 Replies
View Related
Jul 18, 2010
I am running UBUNTU 10.04 on an X86 system 64bit. I am trying install a wireless keyboard and am not having much luck.
-My non wirelessUSB keyboard and mouse work fine.
-My wireless logictech mouse works fine without adding any special drivers/packages
-Wireless Keyboard (LX500, uses same receiver as mouse) does not work with standard config
-Adding HIDPOINT and selecting my wireless mouse and keyboard (LX500) - wireless key board does not work. Mouse still works.Since my wireless mouse worked before HIPOINT installation (64 bit), I believe HIDPOINT is not working.
HIPOINT Does not detect my wireless devices auto, must manually select them. So I believe that there is some conflict with other drivers.Can anyone point be in a direction to look? What are the typical configuation files and drivers used to configure standard USB mouse and keyboards? What are some other software that might be installed that is conflicting with HIDPOINT?
View 1 Replies
View Related
Mar 4, 2011
I am trying to integrate two new machines into an old network running NFS and NIS. One machine has 11.4 and the other 11.3. On the 11.4 machine login, I select "other" and before entering my password I can select my desired window manager from the "sessions" list in the task bar. On the 11.3 machine I select "other", but nothing appears in the task bar. The "sessions" list briefly flashes up after I have already entered by password and hit enter. This machine always starts up in KDE even though I have specified GNOME as the default display manager.Also, on either machine after validating my login, I never appear as a user in the login list. I always have to select "other". Other network users in the same group or users local to the machine do not have either problem. I tried wiping my home directory, but it makes no difference. I'm guessing this has something to do with the NIS but there is no admin here anymore
View 2 Replies
View Related
May 14, 2010
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
View 1 Replies
View Related
Jun 11, 2009
I've been struggling a bit with install F11. F10 installs without issue. I have two internal SATA drives, a PATA DVD-ROM and a USB drive. The BIOS recognizes everything. However, when I got to the disk partition utility, Anaconda could never detect one of the SATA devices. I tried swapping cables, ports, etc. No luck. Today, I ran across this Bug thread: [URL] I checked the screens Ctrl-Alt-F1-6. Nothing obvious. But, for fun (from the bug thread) I went to the prompt on 2 and ran:
dmraid -r -E It found an "nvidia" RAID "thingy". Forgive my ignorance on what it really is called or what it does. Anyway, I answered yes to erase the "thingy" and voila. I was able to install F11. Not sure if I made a good title, but I've seen bits and pieces of people having similar problems with F11. And BTW, the drive that had "nvidia" on it was from a machine that was using nvidia hardware RAID 0 - but F10 had no problems with it.
View 1 Replies
View Related
Dec 27, 2009
I've been searching for tutorials on how to install awesome, it would be nice if someone can guide me on how to install Awesome Window Manager.
View 2 Replies
View Related
Feb 3, 2010
I'm using VirtualBox PUEL and have enabled the USB controller (including EHCI) on a XP VM and have added filters for the devices I want to pass through. Unfortunately the entries in the menu listing the USB devices are greyed out. Running VirtualBox as root has them enabled but the VM doesn't boot past the menu you get when you press the F8 key on startup.
View 2 Replies
View Related
Mar 21, 2011
I want to devolep one "C/C++" program that will work as a daemon. My daemon will be running all the time, and whenever anybody attaches removable devices to machine on which my daemon is running, My daemon should catch that event and also should show me where that device has been mounted.
View 1 Replies
View Related
Apr 23, 2010
I recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies
View Related
May 7, 2010
I installed debian with minimal packages (without an any X components). Later I installed xserver-xorg-video-intel , xserver-xorg-input-mouse, xserver-xorg-input-kbd ... and other X components through apt-get. Created a Xorg.conf file.
On execution of X, I see black screen without cursor. What are the other minimal packages that I need to install in order to run any window-manager like openbox.. ?
View 6 Replies
View Related
May 6, 2011
I am running Mandriva Linux 2010.2 KDE. Linux doesn't detect my thumbdrive when I plug it in. Do I have to change some settings to make it detect? The thumbdrive is in FAT32 format.
View 12 Replies
View Related
Jul 8, 2011
I like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
View 2 Replies
View Related
Mar 18, 2009
Recently i upgraded my dvd writer from pata to sata, now i install LG sata dvd writer into my system, now my problem is that its unable to detect in my fedora 8 box , but i can successfully boot fedora 8 from this dvd writer.i have a kernel version 2.6.23. solution for this.
View 8 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
Jan 15, 2011
I tried to install the latest RealTek driver for Linux and it has wiped all my devices. I've tried reinstalling the alsa-base packages but it hasn't worked
View 4 Replies
View Related
