I just bought a Nokia N900 and it's a beautiful device!
Naturally, since it runs Linux, it's unable to synchronize with other Linux devices. It's one of those wacky universal constants you can't seem to understand.
I've tried using SyncEvolution, which supports funambol, but it does not work. It keeps complaining about a failed authentication or whatnot.
I have an OpenSuSE 11.1 web server. For some reason the time will not stay with what I set it to.I go into Personal Settings and adjust the date/time and no matter what it keeps defaulting back to december of 2007.This is a virtual machine sitting on VMware ESXi 3.5. I noticed that the time in the BIOS was also off by the same date. I adjusted it there and still the time is incorrect within the OS.As soon as I boot into the OS, it displays december of 2007. I check the BIOS again and it reverts back.
View 9 Replies View RelatedI have been using ubuntu 9.10 for about a week and have had problems with my keyboard and track pad on my laptop. I can navigate grub (I'm dual booting) but once ubuntu starts to load then I am unable to use my input devices. Even using cap locks doesn't turn on the corresponding light. As fa as I can tell it seems intermittent and I can make an STR.
View 1 Replies View RelatedPreviously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
By the way, I am using openSUSE 11.1.
Booting to CentOS 5.5 works and I am able to login with all my devices mounted. When I boot from the install DVD and type "linux rescue" I eventually get the message, after attempting to have one of the screens mount my partitions in read/write mode:
"An error occurred trying to mount some or all of your system. Some of it may be mounted under /mnt/sysimage." But nothing appears mounted under /mnt/sysimage. Should I try mounting my CentOS 5.5 partitions manually at this point ?
I have the above bt dongle and I am unable to get the device to scan for remote devices. The dongle and bluetooth software is recognized and from a system point of view is working. Using Suse 11.3 64bits
[Code]...
When I scan the blue led comes on solid and goes back to blinking afterwords but nothing is found. I did try another adapter and the bluetooth worked. BTW The Bluedevel application is real nice and works much better then the kdebluetooth app,
Does anyone have a permanent fix for not being able to use USB devices in VirtualBox as a regular user?
View 11 Replies View RelatedI ahve configured MRTG to generate bandwidth utilization graphs of Network devices.
I ahve configured 30 Network device ( Cisco Switches and Routers), For most of the devices MRTG is working fine but for some devices it is not able to generate log file and giving the following error:
The intention is to have this system dual-boot. When i first put it together, i decided to setup a raid5 array spanning 3 sata drives. I installed Windows 7 first, decided i'd get to Linux later. I left 150mb or so at the beginning of the array for /boot, and about 200gb at the end for my linux install. i'm getting to the linux install. My distro of choice is Fedora 12. I start the setup, and at the point where it's time to partition, the installer tells me that its unable to find any suitable storage devices.
I Crtl-Alt-F2 to a console, and fdisk -l. Fdisk reports three individual drives which all have partitions already. All have free space. None make sense. So i turned to google, and found some threads which explain that this chip doesn't run a true raid, rather its what's been referred to as fake raid. Which is that it depends on the windows driver in order to actually present the array to the OS, and that the best way to get by that on linux, is to break the array, and use LVM instead.
That's all well and good, but i lose two things in doing that. First i lose the resiliency of raid 5, and second, well, what does that do to my windows install? I've considered moving all of my data from windows to other machines, and then just starting from scratch, but i'd really much prefer a method of using the chips fake raid in linux. Is there a driver, or module which i can install to make this happen?
I'm not 100% if that's what it says, because it goes by in like a second.
But when I boot up my computer, the screen stays black for a while, then gives me that error. But then it loads up Ubuntu successfully with no problems.
I was just hoping to fix this, because it causes it to take a while to boot up.
Before I could not even get to identify the Ipaq on the usb port.
Now, after blacklisting ipaq I got this:
Quote:
But still can't see it on the computer nor in media folder, what goes next? I also installed activesync trhough wine, but still no success on actively detecting the device.
On Ubuntu 10.10 x64, when trying to sync via right click "Ubuntu One/Synchroniser ce dossier" Synchronize to Ubuntu One, nothing happens. When within the "Documents" folder I select "Synchroniser ce dossier" Synchronize this folder from the upper right section of the window I get an error message: "Erreur lors de l'activation du dossier. Impossible d'activer la synchronisation du dossier /home/ao/Documents avec Ubuntu One"
ao@Ordi-AO-Ubuntu:~$ u1sdtool --list-folders
No folders
ao@Ordi-AO-Ubuntu:~$ u1sdtool -s
State: QUEUE_MANAGER
[Code]....
Within the Ubuntu One app, my computer is identified and connected.
I wanted to know, I it is possible to synchronize two systems. I�ve got one System on an ext. hard- drive, and one on a desktop computer. An example for better understanding:If I update on the ext. HD and I connect the ext. HD to the desktop, the desktop should be updated to. Or, when I create a new user on the desktop, and I connect the ext. hd, the user should get created to.Is this possible?
View 9 Replies View RelatedI have two folders on different linux machines and want to synchronize both. Please suggest to handle this issue.
View 1 Replies View RelatedWhen I right click a folder and select synchronize it does not sync. It continues to say synchronize on one. When I selected my music folder back in December it worked, but now it doesn't. It continues to work for the music folder and 1 other folder. I can't simply add my documents folder.How do I force one to sync my documents folder.
View 7 Replies View RelatedHow to sync notes to Dropbox, but after the upgrade to 11.04, I can't get Tomboy to sync.
I get the same error as here: [url]
Where the details panel is blank.
But I don't know what hidden file he's talking about. When I press ctrl+h in all the Tomboy folders, nothing comes out, but there are a few manifest.xml files.
Due to recent releases of Ubuntu/Kubuntu/Mint/Mint KDE, I'm pretty near ready to take the plunge full time into Linux on my main desktop machine. Just one thing stopping me though at the moment... folder synchronization.
I have the following setup:
1) Desktop machine running Mint KDE or Gnome hard wired to a Netgear DG834GT router.
2) Archived files stored on a dedicated partition mounted as /home/lucas/archive.
3) Laptop running Windows 7 also hard wired to the router.
4) Shared folder on the Windows 7 laptop called "Archive" on a dedicated "Data" partition.
What I would like to do is synchronize the folder specified in 2 above to the shared folder specified in 4 above.
In Windows I use SyncBackPro to synchronize folders. Is there anything similar in Linux?
how to synchronize Microsoft Outlook with whatever office app of LINUX? What are the office solutions that are offered by linux or what can we compile?I have some CSV files from outlook but it is annoying to daily try to export those.How to synchronize the ubuntu machine, with for instance ethernet
View 7 Replies View RelatedHow can I synchronize my external hdd to a folder on my internal hdd. e.g. when I change something on my external, the folder (on the internal) should be updated to the state of my external (deletes, changes, new files..). but I don't want to make this frequently, so I just need a command to do that. at best secure and without additionally installation.
View 1 Replies View Relatedusing Ubuntu and want to completely switch to it from Windows, but I have an phone motorola a1200 that synchronizes well using windows, but can't find a way to do it in Ubuntu using the usb with evolution
View 1 Replies View RelatedI have made a backup of my files on a remote server and I'd like to maintain that backup using rsync. The problem is that the timestamps don't match perfectly between the source and the backup.
What can I do? I'd rather not replace all the files in my backup because there is so much data it would take a very very long time.
Is there perhaps a way to compare checksums and then update the timestamps? Both are low power boxes with no GUI and only BusyBox CLI access.
I have one local mail server hosted in Mdaemon in my office and ip is 192.168.10.2. My clients can't use the email from the outside. If they want to use the mail, they need to come to office. I want them to use from the outside. How can i set up the mail server. Do i need to host the server on the hosting? I want to synchronize with my local mail server. I don't have the public IP BTW.
View 2 Replies View RelatedI have had no problem setting up Evolution to send/recieve email from MSN but it doesnt not sycronize the calander or contacts which I find a must (as I use the calendar and contact info for all my business apointments/ contacts). Is there a way to setup Evolution to sycronize with MSN all contact y calendar info? subject as on the internet I only seem to find references to google (as well as in synaptic Package manager).
View 1 Replies View RelatedI have two computers with Ubuntu 10.10 on them, a desktop and a laptop. I have two options for handling them:
Try and keep them the same
Accept that they have different 'personalities' and branch off their on way
However, I've chosen the first option because I like to keep my files and settings the same on both computers. I am in the process of extracting a tar archive I made of my entire desktop's hard drive (9.7GiB) onto my laptop, so after this is done they will be exactly the same. However, upon turning the laptop on with my freshly-copied system, things will become different. If I take the laptop to school, for example, and do stuff there, then come back home, and do stuff on my desktop, how can I sync these computers (both ways!) with the new changes at the end of the day/week/whatever?
Scenario: An IDE is set up on a Linux desktop box, editing PHP files locally. Every time I save a file, I want this change to appear on the linux server where Apache is running. The server has ssh (and samba and nfs for that matter).As a reference, when I edited files on Windows, I finally came over WinSCP as the exact tool I needed - WinSCP have just this feature present, with initial synch and then continuous update, using the filesystem watch service: "Keep Remote Directory up to Date".
On Linux, one could argue that sshfs could be employed to sidestep the need for synchronization entirely. On windows, a samba-share would do the same. However, I want the IDE to work with local files (on a SSD disk!), not having to go over the network to do PHP indexing and whatnots, which takes ages.But sshfs might be a part of the solution nevertheless - so that the continuous synchronization just needed to be done between two local directories.
I need to find a tool to keep two directories with exactly the same content. I want to start it manually.
I don't want a conventional backup tool for compressing my data files, I want to keep files in your normal form.
I know I could use "cp -R dirA dirB" but it don't remove dirA excluded files in dirB.
I was going to write a script for this, but I belive it there must be yet.
I have this problem on debian lenny so i have installed ntp. Is this a bug? I use openntpd on archlinux without problem.
View 5 Replies View Relatedwhat is the best way to synchronize files with ftp server
and I wnat to do this automaticlly
If uses SEM_UNDO flag,a ERANGE error will appear,if not,the process can't release resource.
View 1 Replies View RelatedI have 2 threads and both of them are deleting memory at the end nedded by both.
My problem is that maybe it can happen that a thread start and finish before the other one starts and so it deletes the memory nedded by the other thread. How can I synchronize them so that this can't happend.
As a design my threads look like this:
Code:
The other thread looks the same, but this isn't unoff to stop thread1 to finish before thread2 starts.