Have installed a Brother HL-2132 however Ubuntu 11.04 wont recognise, even as I have start up disk? any ideas, it is runnng ok on windows which is on another hdd on the same PC, maybe I can link to there?
View 3 RepliesI have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
I upgraded from 10.10. Prior to that I never had a problem plugging in my player. Someone suggested that the upgrade is buggy and I should install from a cd. Before I do that, are there steps I can take to resolve this?
View 9 Replies View RelatedI've searched the forums and found several posts for similar problems but haven't yet found a solution to my problem.I first realised something was wrong when I attempted to burn a CD using Brasero. Brasero said "please replace the disc with a supported CD or DVD". I tried using K3b, Gnome Baker, Gnome CD Master and encountered the same problem every time - they didn't recognise the blank CD-R in the drive.In Gnome Baker I opened Edit => Preferences => Devices and discovered that only one of my CD drives is listed with a mount point. The CD-R drive (the one I need to burn CDs) doesn't have a mount point.I tried using fstab to alter this by entering a new line so that it now reads:
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
[code]....
I installed 10.04 on Lenovo T61 and USB port recognises a USB stick with no problems.I installed 10.04 on Lenovo 3 x T40's and USB port does not recognise a USB stick.
View 1 Replies View RelatedI've had a quick Google around, but everything I find seems to be a bit out of date (from over 2 years ago). I'm running Ubuntu 10.04 and have tried to use a Belkin N USB Wireless adapter but it doesn't recognise it, nor can I find any drivers. Is there a way to get the laptop to recognise the Belkin adapter?
View 9 Replies View RelatedLittle help needed. just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.
I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that! Some nice simple paint by numbers instructions would help me alot if at all possible.
My laptops screen has recently gained an annoying blue tint, which i do not have the expertise (or money to pay somebody) to fix, so i am using my TV as an external monitor. So what i am proposing to do is purely use the External and leave the laptop monitor off. I am dual-booting Windows XP and Ubuntu 10.04 Devel, In XP it was a simple case of right clicking the Intel Graphics Media Accelorator and choosing the External Monitor option, this then allowed me to set my resolution to 1280x960 and i was happy. (even bigger desktop than before actually)
I cannot seem to find this option in Ubuntu, going through System -> Prefrences -> Monitor gives me the option to mirror the screens, but that leaves me with an incredibly low resolution, choosing to not mirror the screens allows me to set the resolution to 1280x960, but the LCD screen still acts as my main. Is there any way I can set it to recognise the TV as the main, and switch off the LCD like I did in Windows?
I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).
I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.
downloaded the Ubuntu Netbook OS and it works great but I have a Hp mini 1010nr with built in wifi. I can not get Ubuntu to recognise it and so my Computer will not find my router network. How do I get it to get online? [URL]...
View 1 Replies View RelatedI have 9.10 64 on a HP TX2020 laptop, with NVIDIA GeForce 6150. I can't get twin monitor to work. When I go into Nvidia X Server, it doesn't recognise the tv over s-video. According to a lot of the forums I've searched, there should be an option to enable xinerama, which there's not. I know I should study this more and I will, but getting simple things to work takes so long on this OS and I'd really just like to see a movie.
View 2 Replies View RelatedUbuntu 9.10 working great. Installed Orange 515m as per fix shared on this and other forums; however while it works great at home, it will only 'connect' once at work - on subsequent attempts it connects, but browser etc behave as though they cannot find the modem and I cannot make further connections via gmail and Firefox. I had just made the swap from Win 7 to Ubuntu 9.10 for work as well as home, but I cannot be in the position of being unable to access my emails and so swapped my hard drive back to Win 7 drive today
View 1 Replies View RelatedI've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies View RelatedEver since switching to Ubuntu (Hardy at the time) I have had no luck getting my TV Tuner to work. I think the closest I have come is finding this information but it didn't really help and I'm not sure if it's relevant. Can anyone help? I have attached the relevant output of lsusb -v***EDIT***Further to this I have read these instructions and I get the following result.
Code:
michael@michael-laptop:~/v4l-dvb$ sudo modprobe dvb-usb-dib0700
WARNING: Error inserting dib0070 (/lib/modules/2.6.32-19-
[code]....
My thread is both an information and a discussion/question thread. First of all the information. I have long searched for a solution to my desire for Rosetta Stone in Wine but could not get it to recognise my microphone.
Finally today I removed (uninstalled) pulseaudio. It took a few packages with it and I am waiting to see what effect they will have. But finally, by checking the ALSA Driver in the Wine configuration, along with uninstalling pulseaudio, my Rosetta Stone works perfectly. A great deal better than in my XP Virtualbox Virtual Machine. Stoked! For those who are interested I have Wine 1.1.42-0ubuntu4 installed, Rosetta Stone 3.4.5 and am using a Dell XPS M1530 with Ubuntu 10.04 64-bit OS. It's been a long time!!!
My question part relates to the removal of pulseaudio. There have been no obvious negative effects as yet, and from my readings it would seem there shouldn't be, however I am concerned at the other packages it took with it (dependencies). Can anyone give any further advice/info here? I know for sure it took the package ubuntu-desktop which when I try to reinstall it tries to drag pulseaudio and all it's associated packages along with it. Can I/we live without these dependent packages? If not how can I get them back without pulseaudio?
I've got a telstra MF 636 modem that I've been trying to make work in Ubuntu 10.10.
Telstra have the modem report itself as a CD when it is first plugged in, but I've found out how to get around that using the terminal in the telstra software.
Anyway, my problem is that the computer will not recognise that the modem is plugged in. lsusb reports it as there, but the access point does not appear under the network icon 99 percent of the time. On the rare occasion it does, I click it, and it tries to connect, with the little animation and all, but it just disconnects.
At home I use ADSL and my machine has no problem to connect to wired network. But I still can not set up my wireless network. Network Manager scans for other networks in range and find few but my own network is not listed. My other machine (Windows 7 OS) does not have that problem. What could be the problem? Is it the encryption of the network? I've tried with Wicd also - no progress. Did anyone else have the same problem?
View 4 Replies View RelatedI am attempting to install centos5 x86_64 on to an HP Compaq 6820s laptop.It appears the installation has gone ok but I have a big problem in that the centos installation knows nothing about the hardware on the laptop. i.e. it does not recognise the eth0 ethernet card.this means that I have no way of assigning an IP address to the laptop which means that it cannot join the network or the internet.how do you go about getting the correct drivers for the hardware that you are using?
View 11 Replies View RelatedWould ubuntu 64bt recognise the 48gb on the of memory available on that motherboard,,, and would it recognise the the 2 CPU's that are installed on that motherboard.
View 1 Replies View RelatedI was just wondering if anyone else has had problems getting Ident2 to recognise sockets created by java processes?I'm trying to get a java program to connect to a postgres server on the local machine. This works fine if I run the java program on a seperate box with an SSH port forward. When done this way, the ident server just reports the logged in SSH user as you'd expect.However as soon as I move the program to the box itself it all goes wrong and ident simply responds with:31095 , 5432 : ERROR : NO-USERWith a little more investigation I've found this applies to all java programs. Yet when I trace this through with netstat and ps, everything looks normal. Netstat reports the correct process id and this is ascociated with the correct user.
View 5 Replies View RelatedI am using CentOS outside the GUI envirement and upon initial bootup it does not recognise the USB keyboard or mose is there a way to get them to work and recognize them on bootup?
View 12 Replies View RelatedYesterday I wasn't able to successful enable JRE in my firefox.This is what I did ,
I downloaded the rpm from the file and installed it in /usr/java Code: chmod a+x jre-6u<version>-linux-i586-rpm.bin./jre-6u<version>-linux-i586-rpm.bin This successfully installed Firefox JRE in my system now in order to make firefox know abt it
I went to /usr/lib/firefox/plugins and
Code:
ln -s /usr/java/jre1.6.0_24/lib/i386/libnpjp2.so as said in the instruction manual. Still firefox isn't able to recognise the plugin.
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
So I shrunk my Windows 7 partition. Now I have a 450GB partition with Windows 7 on it and a 50GB partition for Ubuntu that is unallocated space currently. So when I go to the setup for Ubuntu, booted into using my USB flash drive, it doesn't recognise that Windows is there. It thinks that the hard drive, all 500GB of it, is free space. Going into GParted, it also seems to think that the entire hard drive is a blob of unallocated space. According to tutorials online, this shouldn't be happening. It should recognise the two different partitions. So I went into Computer in Ubuntu (Live) just to double-check and indeed all my Windows files are there and I can still boot into Windows just fine.
View 1 Replies View RelatedI'm running debian live off the cd to see if it fits my requirements. One of my pet peeves about ubuntu is the use of ctrl ctrl is hosed. the os does not seem to use it for anything, but no application can use it. This is the default for google desktop search, which is highly convenient. Seriously considering the move.I ran debian live and went to install the app. Message comes up archive type not recognised.
View 6 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
My Ubuntu system is occasionally becoming very sluggish. I'm running many things simultaneously and it's very difficult to tell which program is the culprit.
I suspect that the sluggishness is due to disk activity since the CPU usage is consistently under 50% on each of the 4 cores of the CPU, and over 30% of the 6GB of RAM are free.
Is there a tool that can show me in real time the number of disk IO operations per second and the amount of data read/written per second? Can all this info be broken down and displayed per process?
PackageKit is a system designed to make installing and updating software on your computer easier. The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
View 1 Replies View RelatedI want to write a shell script, so that at 9AM every morning a general will be sent automatically to my network users E-Mail ID. My users are as follows: akhtaruzzaman@a[URL], ariful.[URL] etc.
Below is my little effort:
# !/bin/bash
userlist=`cut -f 1 -d : /etc/passwd`
mail -s "mailbackup" << END
keep mailbackup in another drive daily for security purpose
I'm using my Linux (SLES 10) server as a File Server at this point. I need to set File Permissions to nested folders differently to different groups. For example:
homesharedengineering* should be read only for groupA
homesharedengineeringadmin should be read & write for groupB Plus read only for groupA
homesharedengineeringautocad should be read & write for groupC Plus read only for groupA
I've been using Webmin and Putty to set permissions but Putty only allows me the Default Group, it won't allow me to set several groups on the same directory. Webmin seems to allow me to add multiple groups (Webmin --> Others --> File Manager --> Info & ACL tab will provide extended abilities) but when I add multiple groups, they don't seem to take effect? I'm wondering if my setup at the 'Share' level or at the hierarchy of my folder structure (unix based) needs to be set specifically?