I have a dual-boot PC (Windows 7 and Ubuntu w/current updates) with a USB hub PCI card. The card works fine in Windows, but is completely dead in Ubuntu, there is not even any power at the card's ports. How do I get Ubuntu to activate the card?
View 1 RepliesIf i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
I have a desktop pc which is running Ubuntu 9.10, and for some apparent reason I am not getting sound from my sound card. No error message is coming from o/s, I have checked the sound card with head phones, still no sound.Now, I have checked my sound card, because on the same desktop pc, I have another hard drive, which runs Windows XP Professional, and my sound card works perfectly! Please note that I have two hard drives on my pc, one for Ubuntu and the other for XP. So, there is no conflict on operating systems.Does anyone know how I can resolve my sound problem - my sound card is a Creative Audigy 2 Sound Blaster.
View 9 Replies View RelatedI have had problems with my TV card working in 9.10 and 10.04. A fix was suggested to go back to a working kernel. In my case it was in 9.04. Could you give us working kernels in synaptic that we could use or test in 9.10 or 10.04? My attempts at installing kernels, or any program for that matter, from any place but synaptic or add/remove programs has usually ended in disaster.
View 6 Replies View RelatedI own a Pixelview Play Pro Ultra tv card and here are the specs
lspci
Code:
navyseal@navyseal:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
[Code]....
I want to convert my laptop to Linux only machine. My Wireless card is Netgear WG511 and from the little research I have done it is not going to work under Linux. What is an easy to get working Wireless card? I have a Dell Inspiron 8500 and I plan to install Ubuntu 9.10.
View 12 Replies View Relatedso i just downloaded Ubuntu Server 10.04 and i'm very happy with it on my virtual machine... but when i try to install it on my actual server it fails.
When i went to install it, it told me that there was no network hardware detected or something like that. So i just thought i could install a driver for it later.
So other than that all went well. and im very happy but now i dont know how to install my network driver. The card is a LYNKSYS LNE100TX. i downloaded the driver software and burnt it to disk because i was out of floppys. (I like floppys better) and when i went to install the software it allmost worked but it said:
Code:
make: gcc command not found
I'm assuming that means i need to install gcc but didn't really know how to go about it having no internet.
I've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?
View 7 Replies View RelatedI know there are heaps of sound problem threads around here, and I've been through them all and I still can't my sound to work.I have the motherboards onboard audio which works perfectly when I plug in speakers.I want to use my Creative Xfi xtreme audio. When I select it as the output for my sound, it freezes my audio players and firefox when I try.I don't know what the following means, but this is what ople need from other threads.tim@ubuntu:~$ uname -aLinux ubuntu 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
tim@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
[code]...
My laptop is Sony VAIO. I installed ubuntu. However i dnt get sound. My sound card is not working i think. How can i install my sound card here in ubuntu.
View 1 Replies View RelatedI installed 10.10 on my 2nd laptop with the SAME internal wireless card as my other laptop, but Ubuntu all of a sudden acts like I have no wireless card? When I click on the network icon in the panel, Wireless Connections is enabled, but Ubuntu shows no available wireless networks? I can switch to my other laptop and it works fine.
View 9 Replies View RelatedNevermind, i just fixed it.Sound card not working?
View 1 Replies View RelatedI'm a new user of Ubuntu and I think I need some help but let me mention before that I got this up working on a Debian system.My current kernel version is $ uname -r 2.6.32-27-generic.The problem is that my wlan card is not working any more such that my system freezes every time I enable networking with the hardware switch on my laptop.Therefore I bought a USB - WLAN stick and try to get this working.
Network Manager has the option "enable wireless" greyed out if I disable the hardware switch.If I enable the hardware switch and remove the module of my wlan CARD before (modprobe -r iwl3945) it says "wireless disconnected" for all networks.
The wired lan card on hp 530 is not working the wireless works.
Code:
I have BroadCom BCM4318 802.11B/G Wireless Card. When I first started Ubuntu a week ago it didn't work, but I fixed it after a day or two of googling it. However I made a mistake and uninstalled the Network Manager. I then reinstalled Ubuntu, but it wouldn't load the card again. I activated the driver, and restarted the computer, but then, since It was connected via Ethernet, it wouldn't reconize the Ethernet connection, but the wireless card it did, but wouldn't find a network that is supported.
View 6 Replies View RelatedI have a dual boot HP laptop that has an SD/MMS/XD card slot as well as an Acer Aspire One netbook that has two card slots.
On my HP laptop the card slot works fine with Vista but is not recognised when I boot in to Ubuntu.
On my netbook the original supplied Linpus OS obviously recognised both slots, when I load Ubuntu only one slot is recognised.
I have a USB card reader for the HP and the Acer has two slots anyway
I have ubuntu 10.04 LTS. Kernal version 2.6.32.duplicator@Duplicator:~$ uname -aLinux Duplicator 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux.I am trying to install 4port USB PCIe card. But card is not detecting. but card manufacturer says it is plug and play device. this card is working in fedora 11. but i need to install in ubuntu 10.04.
View 2 Replies View RelatedAfter upgrading (from 10.10), i get a line command prompting for login. I cannot get past this line/prompt. How do I bypass this prompt? So that I can access a prior version, if possible.
View 5 Replies View RelatedI upgraded to UBUNTU 9.10 and now my sound card is not working. The card is listed in the sound preferences Hardware but not in the input or output sections.
View 6 Replies View Relatedi was wondering how to get the above wifi card working as it is not supported.
View 1 Replies View RelatedI have been trying to get my Trendnet TEW-649UB wireless card to work on Karmic. I have ndiswrapper "installed", but it doesn't seem to be working. I have reinstalled ndiswrapper-utils 1.9 and ndiswrapper-common from synaptic, but not ndisgtk (the GUI for ndiswrapper). When I try to see if any drivers are installed using terminal (ndiswrapper -i) the terminal freezes on me.
Previously I tried using the help doc for installing Trendnet wireless drivers, but I was met with no success. After my first try using the help doc it seemed that ndiswrapper was working correctly and the driver was installed, but when I tried to connect to my network my wireless was listed as "device not managed". If this helps at all the current state of my /etc/network/interfaces is: auto lo iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
When I run iwconfig I get:
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
but when I try to install the driver using ndiswrapper -i I get the message: driver net8192su is already installed Right now my computer is not even reading that the wireless card is avaliable. When I left click on the network icon I can only see that I am on a wired network {ifupdown (wlan0)}. My computer is dual booted with Vista and the card works there, but for some reason I am having trouble with Ubuntu.
I have to connect to my university's network. I was using ethernet through our router, but now I cannot do that. I recently installed the TRENDnet TEW-643PI and it works perfectly on the Windows 7 partition. Is there anyway to get the card working on Ubuntu without being connected to the internet?
View 2 Replies View RelatedI've just installed Ubuntu (Koala) on an old (but worthy) Toshiba laptop. It's got a Sitecom WL-140 wireless card. (BTW I'm new to Ubuntu, but an old hand at Solaris). Can't get the card to work, although I think It's nearly there. nm-tool shows driver is p54pci. The activity light shows an orange light occasionally. State is disconnected. I'm not really sure whether I should be using the supplied driver (p54pci) or the Windows driver for this card and ndiswrapper. I've installed the Windows driver with ndiswrapper thinking this may fix it but no.
ndiswrapper -l says wlancig: driver installed and device (1260:3886) present.
I have a D-Link Air DWL-520 wireless card on my desktop computer. It runs well with Windows, but doesn't seem to work with Ubuntu. I am using Lucid Beta 2. I have tried googling, but have not come across any clear solutions on how to make it work.
View 1 Replies View RelatedI'm doing an install for a friend, the machine is a Gateway with AMD Turion64. The install required the 64 bit version of Lucid 10.04 RC. When I try to install the NVIDIA hardware driver, upon reboot, it flickers, fails, and tells me to use low-setting graphics mode.
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2)
I have tried all 3 options in the Hardware Drivers menu with no success.
Is anyone having problems since they updated? My card was working fine before I updated. Now it detects all the networks, including mine. However, when it tries to connect it sits there for ~2 minutes, then says it's disconnected. I've checked my security settings and they are fine.
View 2 Replies View RelatedAfter upgrading to the latest Ubuntu, my wireless card stopped working. I keep on pressing the button but the little orange light wont come on...I have an aspire 5517 with "Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)" I have tried drpjkurian's tutorial for madwifi with no success . (http://ubuntuforums.org/showthread.php?t=1309072
View 2 Replies View RelatedI have just installed a generic PCI ethernet card into a fairly low powered system (Celeron 766MHZ, 512mb Ram, 40 Gb HDD, Generic sound and video). The card came with no drivers. I have since installed Ubuntu 9.10, and up to a point everything is fine and looks great. However when I connect an ethernet cable up to the PCI card (in the hope of connecting with the Internet), nothing happens. I am thinking that I need Ubuntu drivers for the PCI card ? or does Ubuntu 9.10 come with drivers and I need to go into the 'engine room' to sort it all out ?
View 1 Replies View RelatedI have a Compaq AMD64 that has ubuntu 9.04 on one HD that works great. I've installed 10.04 on a separate HD and had problems installing it. I have 10.04 running now but I can't get my wireless card to work. During installation I skipped setting up the wireless network. Now when I boot into the 10.04 partition I cannot get the nm-applet to work. I can't get it onto the task bar and I don't see it anywhere else.
I checked to see what drivers are installed, and since I have no connection with that OS I can't update or DL drivers for it. I'm pretty sure that it is because I skipped setting it up during installation. What do I need to do to get the wireless working now? I checked other threads and none seem to pertain to my situation. Since I have to log into the 9.04 partition, I can't copy/paste outputs very easily.