I upgraded to UBUNTU 9.10 and now my sound card is not working. The card is listed in the sound preferences Hardware but not in the input or output sections.
View 6 Replies
Just installed an Asus Xonar DS sound card. Installed the latest ALSA 1.0.23 drivers. The new drivers see my sound card just fine:
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]...
I know there are heaps of sound problem threads around here, and I've been through them all and I still can't my sound to work.I have the motherboards onboard audio which works perfectly when I plug in speakers.I want to use my Creative Xfi xtreme audio. When I select it as the output for my sound, it freezes my audio players and firefox when I try.I don't know what the following means, but this is what ople need from other threads.tim@ubuntu:~$ uname -aLinux ubuntu 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux
tim@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog]
[code]...
My laptop is Sony VAIO. I installed ubuntu. However i dnt get sound. My sound card is not working i think. How can i install my sound card here in ubuntu.
View 1 Replies View RelatedNevermind, i just fixed it.Sound card not working?
View 1 Replies View RelatedI am currently running 9.04 on an HP Mini 1033CL.When I first upgraded to 9.04, my sound card would not work. Finally, about 3 months ago, an update changed that. Now, I see that 9.10 is available, but I am nervous about installing it. Are there any foreseeable problems I need to know about? Keep in mind, I know little about Ubuntu and use it on my netbook (my fun computer) because it is free and I hate windows. Therefore, if there are buggy problems I have to adjust in bios or by tagging something, or whatever, I have no idea how to do it. 9.04 seems fine, so why upgrade?
View 4 Replies View RelatedMy sound card.. TECH-COM PCI 4 sound card isn't working with Ubuntu. I don't know where I can get its driver.
View 9 Replies View RelatedI've spent the last couple hours trying to figure out how to get my SoundBlaster XFi card working, but somehow in the process seem to have now also broken my on-board sound which when I first installed did work. I have no idea how as I hardly touched anything.Both cards are recognized in Sound preferences, sound is not muted there nor in Alsamixer. But neither produce any sound at all now.
Searching around the forums it seems that as of now my XFi should, kind of, work out of the box, but I've had no such luck.I'd really like any advice possible on getting my XFi with headphones to work in 10.04, but if this can't be done I'd atleast like to find a way to fully reset my sound setting so my on-board will work without having to wipe this partition and reinstall - there Must be an easier solution than that.
I have a EMU 1616m sound card and I can not get it to work with Ubuntu 10.04 or 10.10. At the boot sequence I get the message that firmware could not be loaded. However, when I use another Linux distro PARDUS that uses KDE, the card works perfectly. With KUBUNTU i don't get any chance either. I think it is a kernel problem but both distros have the same kernels. So, this is not a KDE vs GNOME problem either as KUBUNTU did not work it either.
View 2 Replies View RelatedI have two sound (or audio) hardware on my desktop computer. One is part of my computer motherboard and the other one is a sound card (CA0106 Soundblaster) I bought to replace the other one. When I first installed Ubuntu, my sound card was working properly after I made the necessary changes (system>preferences>sound), but after a few days it just stopped working and the sound from the motherboard is only working.
I reinstalled Ubuntu to my computer a few days ago, and my sound card was working again, but once again, it stopped working after a few days. How can I fix this?
I have just installed kubuntu 10. My mobo is ASUS p7h55, which hastwo on board sound cards, one for stereo and the other for outputting sound through the hdmi link. When I connect my TV through HDMI, there is no sound. I go to Phonom, and there is only one card in the card selection box.I run aplay -l, and both cards are listed
View 1 Replies View Relatedmy creative sound card isnt working with my ubuntuit's my 1st time to use ubuntui have a built in sound card but it's not workingwritten Ectiviai dont have an ectivia soung card
i have Creative and Realtiki want the ubuntu to install the Creative
Earlier I was in windows to do school that I had to do in windows. I shut my monitor to suspend my computer, which disables my sound card. Later on I went back into ubuntu and forgot about it. Ubuntu had updates to the system and since then I have not been able to get my sound to work.
View 2 Replies View RelatedI am unable to get the hdmi audio for from my graphics card to work. I do not have any speakers to test the other two, and redundant, sound cards .My graphics card is the Nvidia gtx 285, I auto installed the drivers via ubuntu. It does not show up in the hardware tab of "sound preferences". It's not muted, I can't find anything relating to sound in nvidia-settings.but here is my aplay -l:Quote:
card 0: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn]
Subdevices: 8/8
Subdevice #0: subdevice #0
[code]...
I am using ubuntu 9.10 (kernel 2.6.31-9-rt) and an M-Audio Delta 1010 PCI sound card, and trying to get MIDI inputs and outputs to work on this sound card.I have Jack installed and working. MIDI signals from virtual keyboard or a MIDI player can be routed to fluidsynth, and fluidsynth's audio can be played back through the outputs of the delta 1010.I can use a MIDI sequencer (e.g. rosegarden or qtractor) to record MIDI from virtual keyboard, with jack handling the routing.
But, no matter how I configure the connections in jack, I can't get any signals from the "MIDI In" port on the sound card.Does anybody have some thoughts on how to fix this? Where is the disconnect between the delta 1010 and qtractor? I am concerned also that the "MIDI In" LED on the front panel of the Delta 1010 never blinks. There must be some basic ALSA configuration that needs to be done to activate and use these MIDI ports, or something. I've been trying to figure it out for days.
I've upgraded to Maverick but now I cannot get my wireless card working. In Lucid it didn't work out of the box, but worked perfectly by wrapping the Windows driver with ndiswrapper.
I noticed when I installed Maverick that wireless is enabled in Network-Manager and it gives me the option to create a wireless network or connect to a hidden network but it's not discovering/showing any of the wireless networks in range! So it seems as though the card is being recognized but the driver isn't working fully...? I tried wrapping the windows drivers, but that didn't change the situation at all.
Details of my system:
Code:
Ubuntu 10.10
2.6.35-22-generic x86_64
[code]....
I ended up upgrading my wine version to 1.3.20 before it was released to the PPA repos. I downloaded it via git, compiled & installed, but now it did not detect my drivers anymore. It even warned me when i ./configure'd it, but I didn't listen. I tried, also, remove purge all wine packages I own and reinstall them from Ubuntu, but the dud 1.3.20 version is still installed. Is there a way to bring the sound back? Or, is there a way to revert this installation and make me able to install 1.3.19 back?
The following message appears when I access the "Audio" tab @ winecfg:
Code:
Found driver in registry that is not available ! Remove 'alsa' from registry?
Since upgrading from 9.10 to 10.04 sound now only works some of the time. One boot it will work perfectly and another boot it wont, the gnome sound mixer basically says that it can't detect a sound card.
I've compared lsmod when it does vs doesn't work and I've noticed...
Working:
Code:
Not working:
Code:
So it seems like the driver/module isn't detecting or initialising my card on some boots.
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
I have upgraded (twice) to 8.1 and I get constant crackling sound - interestingly only from my left speaker. It starts already after the GRUB boot, and when logged in it just cracks all the time.
- in Wheezy there is no this kind of problem
- I have installed Jessie (crackling), fresh install back to Wheezy (no problem), fresh install again Jessie (problem), back to Wheezy (no problem), and now Jessie (again problem).
- the volume slide is jumping like crazy together with crackling. There is no chance to manually change it.
I have managed (by some unknown chance) to set profile to off, and now it disappeared. However, it comes back ON when rebooted.
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
I upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
i just upgraded to ubuntu 10.04 from 9.10. videos wont play in firefox anymore. ..... videos require 100% computing power and play at 1 frame every 5 seconds with choppy audio.
View 2 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedMy sound card infomation:
Intel 82801I (ICH9 Family) HD Audio Controller
nVidia Audio device
In my ubuntu 11.04, the sound seems not so clearly, seems something bass.
It's OK in windows 7.
I don't know how to config the sound card, or, is there any drivers updates on my sound card?
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
