When I installed truecrypt, I successfully encrypted a thumbdrive. but after reboot, truecrypt isn't in my apps > accessories menu anymore. or any for that matter. I've seen several posts on the web about this problem, but no answers.
View 1 Replies
Installed Truecrypt onto openSUSE 11.3 (KDE) and noticed that Truecrypt needed to be started as root.Modified visudo using YAST asusername ALL = NOPASSWD: /usr/bin/truecryptHowever, when copying files from my backup drive into the Truecrypt partition, there is an access problem (couldn't remember actual error message)In Konsole , updated visudo to username ALL = (ALL) NOPASSWD: /usr/bin/truecrypt Copying is allowed and working fine.Question:1. What is the difference between the above two visudo setting?2. How to updated visudo to the second setting in YAST?3. How to change the editor for visudo in konsole using nano instead of vi?
View 1 Replies View RelatedI have found that spot's Chromium dissappears today. What happens?[URL]...
View 14 Replies View RelatedI checked out this forum but still no solution for my problem. I tried to install Truecrypt, but I can't get it fixed. I extracted truecrypt-7.0a-setup-x64 to Desktop. Then in typed in terminal: sudo sh truecrypt-7.0a-setup-x64. The terminal asks my password and I type in my password and hit enter. The terminal disappears and nothing is happening.
View 9 Replies View Relatedi got opensuse 11.2 (gnome) and created a hidden volume with truecrypt on it. i would like to install nicotine on the hidden volume now,an only run nicotine while it is mounted. i only know how to install stuff with yast, i have no idea how to handle the terminal. i tried but its more like stumbling around. yast always puts the program into the standard menu where i dont want it to be. and by the way,how to disable the autostandby on my monitor? i tried already, but it didnt work)
View 4 Replies View RelatedI'm running Natty 64 bit and cannot install Truecrypt 7.0. I downloaded the tar.gz from [URL] and have tried to install it several times, all without success. I've tried to install it via terminal by running
[Code]...
Each time it goes through the normal steps of having me accept the user agreement and the popup which tells you to run the "truecrypt.uninstall.sh" script to uninstall. The problem is that each time when I click 'ok' at the last step, my desktop environment freezes. I'm running unity 3d. The terminal I started the install process in doesn't produce any output.
Sometimes when the freeze occurs I can still move my mouse, but none of the menus or windows will respond. Other times the mouse will be frozen as well or it will just log me off. I haven't found anyone else talking about this issue and I honestly don't know where to start looking for a way to fix it.
I previously made a question about this and there was an Ubuntu deb package that you could download from Truecrypt's website. But there's no longer any deb packages there's only a .tar package containing a .sh script.When I run the script and install it says that I'm missing these two things. How can I download these two packages using aptitude?Requirements Truecrypt- FUSE library and tools- device mapper tools
View 7 Replies View RelatedTRUECRYPT instalation on CentOS?I found the sources code but I don't know how it install.I didnt find the instruction how it install.
View 2 Replies View RelatedI tried to install truecrypt by executing the setup file and the terminal opened.At the end of the terms of license I agreed. To start installation I was asked to enter my root passwordbut which was not accepted (I restarted the process again and again, the password was entered correctly)
View 3 Replies View Relatedhow I can install truecrypt on Opensuse 11.2 32 bits. I've made a search trough Yast and the opensuse 1-click install website but could not find any package for truecrypt.
Is there an alternative way to install with software? so any solution that does not fall into the category of Yast or web-based installation of packages will be exotic for me
I am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies View RelatedI have reinstalled 10.04 several times and have the same result. After the install everything works and looks great. Then after the first power down and reboot the top menu bar and bottom panel are gone.
The desktop wallpaper (bare of anything) is there, still responds to right-clicks, etc, and the system seems to function, but the menu bar is missing. The extents of the desktop are still the same, so it's not the desktop extending outside of the screen display area (mouse doesn't disappear over the edge).
I can alt-F1 to get to the menu bar menu items, and they function - appearing from the top edge of the screen, but cannot activate them via mouse. I have reinstalled several times and this consistently happens every time. I had 8.10 on this box and it didn't do this. I reinstalled 8.10 and it was fine again, and then back to this with reinstalled 10.04. The 8.10 was a virgin install and I reformatted the drive on every install so there's no legacy crap clinging on.
I can use ctrl-alt-del to shut down/restart/etc., and alt-F2 gets me the command line. All seemingly functional.
Right now I only have Windows 7 64bit installed. I'd like to keep it installed and have a hidden Truecrypt system partition that holds Ubuntu. I've installed Ubuntu once before, but it was a while ago so I don't remember the details. Also, I'm not entirely sure how to work Truecrypt as I've never used it before. Do I install Ubuntu first and then run Truecrypt, if so, how do I deal with the fact that installing Ubuntu involves many partitions. Does Truecrypt recognize this automatically or do I have to somehow encrypt them all?
View 1 Replies View RelatedI just installed Ubuntu on the second partition of my hard drive. I have Windows 7 installed on the first partition. My problem is is that when I rebooted after a successful OS installation and apparent grub install, it went straight to boot up Windows 7. There's probably a simple way to get the grub menu to appear that I'm unaware of, right?
View 9 Replies View RelatedI want to disable Reboot and Shutdown options from the drop down menu in Ubuntu 9.10. I tried this:[URL] I also tried to modify the gdm.conf file, but the changes I made, made no difference.
View 2 Replies View RelatedI have two separate Linux installations on my system which I can access from grub. Is there a way to get back to the grub menu to access the other system without having to reboot?
View 2 Replies View RelatedI have a Windows partition encrypted with TrueCrypt. If I start TrueCrypt (or RealCrypt) I can mount the partition through the GUI. before I encrypted the partition I used to auto-mount it at boot using fstab and it would appear in my places bar in the file managers. Is it possible to auto-mount truecrypt partitions from fstab?
View 2 Replies View RelatedI know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
I can't seem to get the options halt and reboot working in my openbox right-click menu. I've tried following the guide here from post #11, where the code he says to use in the /etc/sudoers file is:
%users john=NOPASSWD: /sbin/shutdown -h now, /sbin/shutdown -r now
...but I can't seem to get it to work on my end. In obmenu, I have for halt, to run "sudo halt" and for reboot, "sudo reboot" but they only work after I've already entered my sudo password, such as when I work with terminal to edit a config file.
Each time I reboot I get an additional display of items.
After one reboot:
two user menus
two desktop selection displays
two application menus
...
two open applications showing in system tray
After two reboots:
three user menus
three desktop selection displays
three application menus
...
three open applications showing in system tray
After five reboots:
Six user menus
Six desktop selection displays
Six application menus
...
Six open applications showing in system tray
How can I reset this? I have been using ubuntu for a while, but switch to debian for more stability. I am not very familiar with debian graphics or gnome desktop.
I've recently found out about "lilo -R" (I've always hated waiting for Lilo after reboot but never thought that a solution could exist :-) ), but I would like to avoid typing it in a shell windows. It would be easier if I just had a "Reboot to Windows" option in the KDE logout menu.The question is: do I have to recompile KDE or there is a simpler way (i.e. scripts)?
View 2 Replies View RelatedI have done 3 clean installs for this problem and it remains, i don't want to do it from the terminal..(Buttons exists but they won't work...)
View 3 Replies View RelatedI just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.
I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!
This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies View RelatedI tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot
md1 /
md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
I am trying to install TrueCrypt in ubuntu 9.10 and I am having troubles. When I to extract the tar.gz that the program comes in, I get this error:
'gzip: stdin: unexpected end of file
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now'
The file also comes with a PGP file. (tar.gz.sig.). I am not sure how to use the signature file to open the archive. Here is the site I downloaded from: [URL]
Just done my first ubuntu 10.04 install on a hp pavilion a320a, the install seems to have went well, though while it is shutting down and before rebooting the following error appears across the screen:
[16866.760778 end_request: I/O error dev sr0 sector 504392]
Before this error appears at the bottom of the screen the error scrolls on the screen with a different number at the beginning of the error where 16866 etc (different number each line) remainder of the error remains the same maybe different sector number but not sure, there is way too many to write down in the time they are on the screen.
Installed ubunto 10.10. The OS installed just as the directions read. got to the reboot screen and after the reboot all I have is a flashing cursor. Its a new built system.
1T HD 8GB ram AMD X3 450cpu Ati PCI-e 1gb video card. I reinstalled and got the same problem this was NOT an update from 10.4. How do I solve the problem?
