I just installed Ubuntu on the second partition of my hard drive. I have Windows 7 installed on the first partition. My problem is is that when I rebooted after a successful OS installation and apparent grub install, it went straight to boot up Windows 7. There's probably a simple way to get the grub menu to appear that I'm unaware of, right?
View 9 RepliesI installed fedora core 11 on a dell inspiron laptop which has windows vista already installed on it. It shows that fedora is installed successfully and to reboot the system. When i reboot the system there is no grub screen and it directly boots windows.
View 5 Replies View RelatedI installed fedora core 11 on my laptop (dell inspiron 1525), which has windows vista already installed on it. After installation it says that the installation is complete and please reboot the system. When I reboot it is directly booting into windows. The os selection screen is not shown.
View 9 Replies View Related#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
# .....
Every time update-grub run all these are put back. Editing grub.cfg does not help.
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI have two separate Linux installations on my system which I can access from grub. Is there a way to get back to the grub menu to access the other system without having to reboot?
View 2 Replies View RelatedI know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies View Related9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies View RelatedI installed Ubuntu via Wubi, but now when I boot up the computer, it asks me to select Ubuntu or Windows, then after I select Ubuntu, it takes me to the Grub menu, which also asks whether I want Ubuntu or Windows. I've had this on multiple computers, and it's not very useful. How to change this?
View 2 Replies View RelatedSo after installing linux for the first time - version 11.04, first there are 1000 problems which don't fix especially the fact it didn't boot into linux half the time. I managed to get on it and there was an update, thinking this would fix something I updated it and now I can't do anything on my laptop! Before I could atleast log onto windows but I can't even do that now. The place where you can press f12 to go into the bios and change priority I can't even get there because when it says to press f12 I press it but nothing happens and it still takes me to a blank screen with no grub menu no nothing.
View 9 Replies View RelatedI have reinstalled 10.04 several times and have the same result. After the install everything works and looks great. Then after the first power down and reboot the top menu bar and bottom panel are gone.
The desktop wallpaper (bare of anything) is there, still responds to right-clicks, etc, and the system seems to function, but the menu bar is missing. The extents of the desktop are still the same, so it's not the desktop extending outside of the screen display area (mouse doesn't disappear over the edge).
I can alt-F1 to get to the menu bar menu items, and they function - appearing from the top edge of the screen, but cannot activate them via mouse. I have reinstalled several times and this consistently happens every time. I had 8.10 on this box and it didn't do this. I reinstalled 8.10 and it was fine again, and then back to this with reinstalled 10.04. The 8.10 was a virgin install and I reformatted the drive on every install so there's no legacy crap clinging on.
I can use ctrl-alt-del to shut down/restart/etc., and alt-F2 gets me the command line. All seemingly functional.
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
i have 2 hard drives connected to sata ports randomly on my motherboard ( i didnt do it in any order )
1. Western digital 500GB - Windows 7
2. Seagate 500GB - Linux HDD - had ubuntu 10.04 on it before suse
Ok basically, ive been trying distro's by installing them on my linux HD, my favourite is ubuntu, but i wanted to see what else is out there so i tried out OpenSUSE, and with suse i unfortantly came across many problems with grub-legacy, and i solved that eventually by changing my boot hard disk in BIOS to the seagate, and installing grub on that Ive never had a grub issue in the past using ubuntu, only with suse Then i decided to go back to ubuntu because everything just works and i like .deb packages, so i installed 10.10 32Bit
Everything went fine, chose default install options, formatted the Seagate drive, and installed to the seagate, HD changedt the boot drive to the western digital in BIOS ( were ubuntu likes to install grub in the past ) booted fine, installed fine, grub showed fine, booted to linux then i went back to windows for a day of gaming and fun, i just rebooted about 30 minutes ago to play with linux, and i cant access the grub menu my pc goes to the POST screen and then were grub should show, i get a blank screen and the pc just reboots to the POST constantly this problem has never happened with ubuntu, ive had 10.10 before, this is all started after removing opensuse
ive tried F8 and booting from both drives, the seagate i just get a white underline for ages and nothing happens and i cant boot to windows on the WD Im currently on my livecd im using the 11.04 livecd, all my cds arent labelled, so i have no idea which is which, i just chucked one in to get a browser, but i gotta say natty 11.04 IS AWSOME
Here's the problem: My ubuntu goes into a black screen with "_" flashing after selecting the kernel in grub menu. Everything has been working just fine since I installed it (about a month ago, when 11.04 came out). The problem must have something to do with grub not finding the correct partition or something like that. I was messing around with pysdm, trying to make it auto-mount one of my partitions, so that's the likely cause of my problem. However, I did not edit anything on the ubuntu partition, only the partition where my files are located. Is there any way to tell grub which partition to load upon booting up?
View 9 Replies View RelatedWhen I boot my pc it used to take me to a prompt which asked which OS I would like to boot. Today randomly, some grub rescue menu came up. I read online that that meant I had to fix my grub menu, which I did. Now a regular grub menu pops and and I have no idea what to do with it. Whats a grub menu? How can I just get back to my regular boot screen? I run dual boot xp and ubuntu, is grub a program of xp or ubuntu? I have no idea what this grub menu is and whats going on with my pc!
View 2 Replies View RelatedAfter a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
i have dual boot computer win7 and 10.04 ubuntu. i installed the ubuntu inside the win7
now i have problem that GRUB prompt out every reboot. i could get into system by type this(but GRUB come back after reboot)
Code:
set root=(hd0,1)
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /initrd.img
[Code].....
I'm currently trying to get to the root of an problem on startup; unfortunatly when booting after the first couple of messages when booting without quiet and with nosplash in the grub menu I still end up with the nice blue background and the slowly filling bubble... I'd like to go back to the old, boring, messy, but much loved and now much missed (least by me) text boot screen where I can see wtf my system is doing and where its hanging during the boot process.
(I know the cause of the hang now but still want to go back to the old fashioned noisy boot environment - not a fan of the windows style silent boot... I like to know what's going on and that my PC hasn't decided to join the French and go on strike, though wouldn't blame my poor netbook if it has, hammering the bleeper doing random number analysis - not something an atom 270 is designed for)
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
I am having trouble with the grub boot menu. I have a dual boot system, Windows XP 32 bit and Ubuntu 10.04 64 bit. Windows was preexisting when I installed Ubuntu. The install went fine but when I restarted, the Grub menu gives the option of the Windows boot loader but when I tab to that and press enter the screen goes black and the curser just blinks in the upper left corner...no XP boot. The XP drive is there as I can mount it from Ubuntu side but when I try to boot into it it does not seem to be there. What have I done and what can be done so that I can boot into the XP side?
View 7 Replies View RelatedI am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
I recently decided to venture into the world of Linux/GNU by installing Ubuntu.
Before installing, I had a 190gb partition for windows 7 and 45gb of unallocated space. Through Wubi, I used the advanced partition editor to make a 6gb swap partition and a 22gb root partition for Ubuntu. All went well, but when I rebooted, I was unable to choose linux.
I installed Ubuntu by using Unetbootin to put the Ubuntu ISO on my USB drive. After installing, I disconnected the USB drive, and I was unable to choose the linux kernel option on the GRUB menu. When I do, my system just restarts and presents me with the GRUB menu again. However, windows 7 boots up perfectly.
I'm assuming that GRUB is somehow trying to boot the linux kernel from the USB. How do I change it to boot from the installation I made on my harddrive?
I rebooted, and got a new GRUB error:
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 7b4afbe0-28fe-4403-bd86-c4364bf10f98
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b4afbe0-28fe-4403-bd86-c4364bf10f98 ro single
initrd /boot/initrd.img-2.6.31-16-generic
Installed 10.04 on my daughters laptop from within windows Vista. All went OK but I had two boot loaders, i.e. turn on laptop and I would get the Windows loader asking if I want to boot in to windows or Ubuntu. Upon selecting ubuntu I would get the standard grub loader that I have on my PC. Did an update a few mins ago and it asked me to update grub which I did and as there was only one disk showing clicked forward. Now on reboot I have grub rescue prompt, no such device. Hard drive is a single 80 gig drive with windows on one partition and ubuntu in another. Have the live cd so can boot from that I guess. What do I do next?
View 9 Replies View RelatedJust got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.
View 2 Replies View RelatedI am fairly new to linux and my laptop froze so I rebooted it and now I have this error. I have tried to load the files needed using the prompt but nothing seems to work so here is my bootinfoscript thing. Any way for me to reinstall ubuntu over the sda5 partition but keep my files?
Code:
Boot Info Script 0.55 dated February 15th, 2010
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb .....