I know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I've recently upgraded to 11.04.Till now, I could select an option to make the open folders on shutdown, to restore on startup.There was an option to restore running applications
View 5 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI have an arbiter which determines and manages a lab. I am wondering if it's possible to remotely control the grub boot selection. Right now I have to wait for the nodes to boot, check the hostname and then rsync the new grub configuration and reboot the node, it's VERY timely so I am wondering if there is an alternative to this method?
View 2 Replies View RelatedI want to disable Reboot and Shutdown options from the drop down menu in Ubuntu 9.10. I tried this:[URL] I also tried to modify the gdm.conf file, but the changes I made, made no difference.
View 2 Replies View RelatedI have Windows XP as well as Ubuntu in my desktop. I would like to temporarily disable XP for a month or so, so that One cannot see Windows XP appearing in the grub menu list or during the boot. Is there is any option to edit the grub menu?
View 1 Replies View RelatedI've had two students report a problem whereby Ubuntu does not show up as a menu option in Grub. Both systems used Wubi installations of Ubuntu 10.04 Desktop for x86 on Windows XP. In both cases, Ubuntu completed the installation process. Upon reboot, we have the options to choose between Windows XP and Ubuntu. However, once we enter into Grub, only the Windows XP option shows.
View 8 Replies View Relatedi have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
View 1 Replies View RelatedI installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery)
Memory Test (memtest86+)
Memory Test (memtest86+, serial console)
Windows Recovery Environment (loader)
With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
recently performed an upgrade to Ubuntu 10.10. when I rebooted, my GRUB menu showed only the memtest86+ option, rather than the usual options for Ubuntu, Fedora, Debian, Arch, and WinXP (which I haven't booted in a very long time, so I am almost 100% sure that it is not WinXP's fault. I was able to boot using a Live CD, and when I checked grub.cfg, all of my boot entries were still there. However, when GRUB itself actually loads, only memtest86+ is in the menu. I also checked that I can still boot by editing the memtest86+ option in grub so that it matched the entry for Ubuntu in grub.cfg, and it still booted correctly. However, I am curious as to why my GRUB is now forcing me to manually enter the boot entry on each boot. Here is my grub.cfg:
Code:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]...
if it's possible to see or retrieve from the system which menu option from the grub boot menu was selected afterall.
View 1 Replies View RelatedI just installed Ubuntu on the second partition of my hard drive. I have Windows 7 installed on the first partition. My problem is is that when I rebooted after a successful OS installation and apparent grub install, it went straight to boot up Windows 7. There's probably a simple way to get the grub menu to appear that I'm unaware of, right?
View 9 Replies View RelatedI have two separate Linux installations on my system which I can access from grub. Is there a way to get back to the grub menu to access the other system without having to reboot?
View 2 Replies View RelatedAfter installation of windows 7 installed debian 8.3. But in grub menu no boot option showing to windows.There ar only two option 1.)to boot in debian and 2.)advanc option for debian ONLY!!
View 1 Replies View RelatedI've recently found out about "lilo -R" (I've always hated waiting for Lilo after reboot but never thought that a solution could exist :-) ), but I would like to avoid typing it in a shell windows. It would be easier if I just had a "Reboot to Windows" option in the KDE logout menu.The question is: do I have to recompile KDE or there is a simpler way (i.e. scripts)?
View 2 Replies View RelatedI have done 3 clean installs for this problem and it remains, i don't want to do it from the terminal..(Buttons exists but they won't work...)
View 3 Replies View RelatedFurther to this LQ thread which Tinkster solved by suggesting the last command (thanks Tinkster) I have been exploring last -x reboot and have found that the reported duration is incorrect for the last reboot and shutdown when a old wtmp file is used. Not having a record for the following shutdown, last assumes that the system has been up until the current time and similarly for the shutdown.
The output comes in time order, latest first, each line showing the time of the reboot and the uptime from then to shutdown. Using last -x reboot shutdown to show the shutdown time, here's an illustration
Code:
shutdown system down 2.6.29.6-smp Sun Mar 7 15:35 - 03:02 (11:27)
reboot system boot 2.6.29.6-smp Sun Mar 7 09:35 (05:59)
09:35 until 15:35 is 05:59.
When the uptime exceeds 24 hours it is shown as (<days>+<hours:minutes) like this
Code:
shutdown system down 2.6.29.6-smp Sun Feb 21 12:39 - 13:20 (00:40)
reboot system boot 2.6.29.6-smp Sat Feb 20 09:39 (1+02:59)
09:39 until 12:39 the next day is 1 day 02:59.
The time in parentheses at the end of the shutdown lines is normally the time until the next shutdown.
So far so good. The incorrect output is for the last reboot and shutdown of an old wtmp file. Here's the output of last /var/log/wtmp -x reboot shutdown; last -f /var/log/wtmp.1 -x reboot shutdown
Code:
[snip]
reboot system boot 2.6.29.6-smp Fri Mar 12 07:42 (01:54)
shutdown system down 2.6.29.6-smp Fri Mar 12 01:31 - 09:37 (08:05)
wtmp begins Thu Mar 11 08:25:26 2010
[snip]
reboot system boot 2.6.29.6-smp Wed Mar 10 14:12 (15+01:42)
shutdown system down 2.6.29.6-smp Wed Mar 10 12:41 - 15:54 (15+03:13)
[snip]
The boot started at "Wed Mar 10 14:12" which had an actual uptime of 1 day 11:20 is reported as 15 days 03:13 which is the time from then until the last -f /var/log/wtmp.1 -x reboot shutdown command was issued. The time from shutdown to shutdown is similarly affected.
Ubuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525
ubuntu 10.04 (only os on system)
i have script it is for installing a program when I run it on terminal an old type GUI with a scroll bar and options appears. I can go from option to option but the first one is default selected and I can not select any other one it is something like that:[*] option 1
[] option 2
[] option 3
I can go over option 2,3,.. but the first one is default selected [*] with the asterisk. How can I move asterisk to any other option? when i go over another option and hit enter it is executing the default one.
I installed Ubuntu 10.10 desktop edition. I followed the instructions for installation available on "ubuntu.com". After installation at restart I didn't get window to select operation system. It restarted with already available Windows SP3 OS. The drive on which i installed ubuntu is not shown on windows.
View 1 Replies View RelatedI installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I'm about to install a version of Ubuntu onto a 32GB flash drive, I've downloaded are Universal USB installer that will do most of the work for me, however, it asks
Step 4: Select a persistence option for your USB
and the options are
1GB CASPER -RW
2GB CASPER -RW
3GB CASPER -RW
4GB CASPER -RW
What is persistence? am I better off having more (ie 4GB) since my flash drive is a 32GB drive?
I'm trying to install Ubuntu 8.04 on my pc but every time I select an option to install from the cd, the pc reboots and I go through the same thing again.
I've tried installing within windows but that just installs a folder with Ubuntu in but I can't start Ubuntu up when it's finished installing?
My development target environment is intel corei5 architecture. I want to build my source for i5 architecture. I am paning to use gcc 4.5.1. In the gcc manual i found an option to select the cpu type(-mtune = cpu_type).There is no i5 processor in the cpu type options.If i use -mtune=generic, will it produce optimized code for i5 architecture or it will produce the code for generic x86_64 architecture?
View 2 Replies View RelatedIn order for TRIM to work on an SSD with encryption, I need to make sure to "select the AHCI option before installing the operating system."Does anybody know how to do this? I have no idea what this is talking about. I'll be installing 11.04 with no dual-boot. Just Ubuntu alone.
View 9 Replies View RelatedI want to recompile apache so I can select a different MPM compile time option. I have looked in the graphical application manager, but I don't see a development version of apache like you do for many of the packages. Am I not looking in the right place for the source code for the Apache 2.2.17 available with FC14?
Alternatively, I can download the source from apache.org for 2.2.17. However, the install options default to a host of different directories than the FC14 version does. Being somewhat OCD I hate to mess up my FC14 system by installing to a bunch of anomalous directories, and I don't want to break anything. I can change the default install directories, if I knew what the FC14 apache 2.2.17 was compiled with. There is an httpd-devel-2.2.17-1 package. But the description makes it sound like it is for developing additional modules. I want to recompile the main httpd-2.2.17-1 package. Does anyone know if this is a possibility?
I was installed linux mint in windows 7 using option "Install inside windows"... I got trouble with windows7 so i reinstalled it... but now there is no option to select OS at the start up... But i have the drive where i installed mint and all other files.. Is there any way to get it back.. Because i dont have time to reinstall mint...
View 1 Replies View RelatedI'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
I just replaced F14 with F15 (clean install). Now, when I try to add my HP Deskjet 710 printer I'm not seeing any option to select the parallel port. I've tested the hardware with an old F10 live CD, and every thing's okay there. Does the parallel port still exist in F15, or has it been nuked?
View 2 Replies View Related