Ubuntu Installation :: 10.04 - Error After Install Before Reboot
Jun 6, 2010
Just done my first ubuntu 10.04 install on a hp pavilion a320a, the install seems to have went well, though while it is shutting down and before rebooting the following error appears across the screen:
[16866.760778 end_request: I/O error dev sr0 sector 504392]
Before this error appears at the bottom of the screen the error scrolls on the screen with a different number at the beginning of the error where 16866 etc (different number each line) remainder of the error remains the same maybe different sector number but not sure, there is way too many to write down in the time they are on the screen.
View 7 Replies
ADVERTISEMENT
Feb 16, 2011
I have a PC with below configuration.cpu intel core i5 650 boxed 3.2 ghz socket 1156MB intel P55 Chipset DH55P J BoxedHDD WD SATA 2Tb 64MB cacheI installed "ubuntu-10.04.1-desktop-amd64.iso", and looks grub2 is not installed properly. I do not see all the files in grub install folder.Please let me know, ubuntu-10.04.1-desktop-amd64.iso is the right installable or not.If it is right one, how to re-install grub2 properly.
View 1 Replies
View Related
Oct 7, 2010
I am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies
View Related
Dec 21, 2010
I tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot
md1 /
md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
View 2 Replies
View Related
May 4, 2011
I'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies
View Related
May 1, 2010
I'm installing 10.04 using Wubi, Wubi finishes and asks if I want to reboot, I reboot and select Ubuntu. The installer seems to progress, however later the following pop-up appears
"The installer encountered an unrecoverable error and will now reboot"
View 9 Replies
View Related
May 15, 2010
I rebooted, and got a new GRUB error:
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 7b4afbe0-28fe-4403-bd86-c4364bf10f98
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b4afbe0-28fe-4403-bd86-c4364bf10f98 ro single
initrd /boot/initrd.img-2.6.31-16-generic
View 8 Replies
View Related
Jul 26, 2010
I seldom mess with Wubi because I prefer a true dual-boot but due to a recent reply in the following bug report I thought it might benefit Colin Watson to have a first hand source of the problem:[URL]Then "bcbc" replied in post #273 and shortly after the thread was closed Now, I've had precious little time to do much testing and such lately due to an overdue remodel that was needed due to a kitchen fire over two years ago, and weather related problems have just nailed me big time to-boot, so I'm sorry if I seem more scatter brained than usual, but such is life.
Anyway, I did as "bcbc" suggested but it appears that Verbose Mode is no longer supported in 10.04 Wubi I do not currently have a working camera to take a shot of the options provided if hitting Esc after the initial install but it just drops me to a grub> prompt.I've tried disabling every bit of the Win XP security, defragging, reducing and increasing the default size of the Wubi install, etc, etc, etc!Any Wubi experts out there?I'd like to test for regression regarding those grub2 updates but I can't unless I can install 10.04 Wubi on this test machine Also, I can't currently network more than one computer, so ssh is just not possible. I have no room! The moral of that story is to NEVER live in a home while you're remodeling
View 2 Replies
View Related
Jun 14, 2011
I've been trying since ever to install the new ubuntu on my FakeRaid controller and I'm really starting to get frustrated. After restarting, i get the message "reboot and select proper device.." So my first tough was that my grub was not installed properly. So i ran the boot_info_script.sh that I found in the forum and here is my output. It says that the boot loader is not installed and my Raid is screwed up. I went look in the BIOS and everything looks fine. Ive put the result.TXT from the script.
Quote:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of
/dev/mapper/ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 000.
ddf1_00000000000000004b1ba2914b1ba291f5010000f5010 0001: ________________________
[code]....
View 2 Replies
View Related
Jun 29, 2011
Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
View 7 Replies
View Related
Jan 7, 2010
This has to be the sixth time I am going to have to reinstall Ubuntu (Can't get enough of that Linux greatness) in the past 6 months. I just don't understand what exactly is wrong, I don't install anything extra (but the ubuntu restricted extras) yet updates that ask me to reboot will take me to a GRUB command line screen and trying to boot through the command line interface gives me an, "Invalid Magic Number", error.
There should be an official tool for when problems like this come up, so that users like me can easily move their files off their HDD before reinstalling. I didn't come here to rant but, does anyone know what may be causing this everytime, how it can be avoided maybe even how to deal with the Magic Number error and boot in (I wouldn't mind typing in the commands every time BTW)?
My system
Hp Compaq 6730s
2.0Ghz 575 Celeron
4GB RAM
Intel X4500MHD
Broadcom 802.11b/g
View 2 Replies
View Related
Mar 24, 2011
I have a new acer machine which runs fine on 10.10 mythbuntu desktop livecd. Install seemed fine.
Then I ran an update and on reboot I get a kernel panic error. Research on this reveals it as a very deep subject which can consume many hours, so I opted to reinstall.
This time with ubuntu 10.10. I've tried different CDs, liveusb. Same errors.
So, the question is this - where do I concentrate my efforts - somewhere ubuntu doesn't like this machine, or grub. Does a reinstall overwrite the grub install too? Or do I have a bogus grub install I need to purge before I will get anywhere.
View 5 Replies
View Related
Apr 29, 2011
Basically my problem can be neatly summed up as the problem described at both here and here. I can only presume it's a rather uncommon problem to do with a particular hardware setup since I can't find any widespread bug reports of it, but it is (on my system at least) highly replicable. I can reboot my system from Natty and it either one of two scenarios. It can reboot the system (as first asked) then reboot again in the middle of POST and splurge an error about interrupting POST at me (and keep giving me this error every reboot till I go into the bios and resave some settings).
Alternatively, it can get all the way into grub, where I can dual boot into Windows, windows will get some arbritary point in (usually the login screen give or take 10 seconds) and then reboot at random. It's not even a windows crash since I've disabled auto-reboot.I'm not sure what's causing it but I can only presume it's something at the kernel level, since I'm not sure anything else would have the kind of power needed to interfere with the system at an 'outside the OS' level. As such I wouldn't have any idea how to go about fixing it, but I can hope that someone here may be able to point me in the direction of potential settings I can change (probably BIOS I guess) that might aleviate the issue till a fix is found.
View 3 Replies
View Related
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
May 18, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.
View 9 Replies
View Related
Dec 30, 2010
I downloaded Ubuntu 10.10 in November 2010 and used the windows installer to install it next to my Windows 7 OS. I have a Windows 7 Home Premium 64 bit. I am a beginner user and only Ubuntu when I need to run the terminal and text editor to create and test simple C++ files. Today, the install manager requested that I install critical updates so I left the default selected files and upgraded. The it asked to restart the system so I said yes. When it restarts it asks which OS to load:
1. Windows 7
2. Ubuntu
So I select Ubuntu then it displays some message about NTFS and quickly reboots (so i can't get to read the remaining message) the PC again. Uusually it would ask me to select the version of Ubuntu to load. Now my PC will only laod up Windows 7 so I can't get back into Ubuntu to dianose the problem.
View 3 Replies
View Related
Mar 30, 2011
I'm on an HP Pavillion dv1000 laptop. I used a live CD to install Ubuntu 10.10 to an external USB hard drive. The install completed successfully, but after a reboot I am stuck on a black screen with a white cursor. Before that I see nothing but the initial HP startup screen. I am able to run the live CD without problems, and I have been running Ubuntu from a 4GB thumb drive (which I installed on using the same live CD that I used to install on my current external hard drive). I had no problems whatsoever running from the CD or thumb drive, so I can't figure out why the external hard drive would be so different.
View 7 Replies
View Related
Jan 14, 2010
I had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
View 1 Replies
View Related
Apr 25, 2011
Using Ubuntu and any Linux OS. I installed Ubuntu using the Wubi installer. Everything went fine. When the install wizard completed and asked to Reboot Now, I did. When my computer rebooted, the Windows Boot Manager doesn't appear and it goes straight to Windows.
I'm using 32 bit Vista and have an AMD Athlon X2 Dual Core Processor 5000+. When using Wubi, the download defaults to the AMD 64 version and that is what I have installed.
View 3 Replies
View Related
Jun 24, 2010
what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
View 1 Replies
View Related
Nov 3, 2010
This was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.
I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.
View 2 Replies
View Related
Feb 15, 2011
For some reason my disc I burned for ubuntu desktop 10.10 freezes when I get to the ubuntu logo with the 5 dots. I am able to install ubuntu server just fine.
I tried to install desktop on top of server using sudo aptitude install ubuntu-desktop and then whenever I reboot it freezes during startup.
I think it might be my swap partition. I recall seeing a blip of an error talking about "press C to skip or M to start maintenence" or something like that. It never stayed on the screen long enough for me to read it.
View 2 Replies
View Related
Mar 8, 2010
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies
View Related
Nov 18, 2009
After successfull installation of Suse 11.2 and reboot i get a Blackscreen. When i try to start with "init 3" its still the same problem, Error Message in Bootlist
"Failed to get NUMA Memory Information from." Suse stops loading after "HAL DAEMON - DONE" and gets a blackscreen. If got a Nvidia Gforce 9400GT Graphic Card, and a Athlon 2 x2 Processor. I loaded the DVD with Bittorrent and Checksume and Burning are o.k/successfull. I also tried to reinstall with ext3 but still the same problem. Are there any known issues/solutions for this Problem?
View 9 Replies
View Related
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
May 10, 2010
I have laptop ASUS X51RL with Intel pentium dual core inside processor. As mentioned here:I tried to install i386 FC12 on it. When the instalation was completed, there was a message to reboot. So did I, and while the BIOS was still loading, of course, removed the DVD in order not to repeat the instalation. Fedora started loading with the three varioants of the blue color bars and suddenly on the screenappeared a long message finishing with the words: "kernel panic - not syncing: fatal exception in interrupt " and that was all - the system stopped untillo there and never loaded For the last 2 days this is about my 12th attempt to get linux. Before I had tried about over 6 times with ubuntu, finishing the same way after the first reboot, 1 time knoppix and 2 times Debian. Only debian succeeded to load succesfully after its instaltion was complete, but I didnt linke it and a friend of mine strongly recommended me FC12. So what am I supposed to do??? I guarentee, my hard disc is not corruted as I read 1 hundred times on google, I had benn running windows 7 before I started trying to get linux and everything was OK... the install DVD is also OK, I tested it in the same beginning of the instalation and the test was successfull.
View 7 Replies
View Related
Apr 14, 2011
I Just installed OpenSuse 11.4-32 bit with KDE 4.6 on my PC. At first boot everything was working, then I added the community ATI/AMD repository to get the drivers for my ATI 5570, but after reboot i got a blank screen. So I ran the "failsafe mode" in the boot menu, it worked (3D accel. as well), but just for the root user. To make it work for the non-root user had to set the setuid bit for /usr/bin/Xorg. (is it ok to run xorg with superuser privileges?) Then I tryed to understand wich is the kernel option actually needed for X to start, and after a few attempts I realized the only option really needed is the "nomodeset". what is the nomodeset option for? and why I need it to run in the graphic mode?
View 9 Replies
View Related
Sep 16, 2010
I tried to help my friend install Ubuntu 10.04 side-by-side with Windows XP on his Acer Aspire One netbook.Unfortunately, the installation process came to a standstill and it quit due to "unexpected errors". The second time I started the installation, I realized that the option for installing side by side was gone and that I could not mount the C: partition on Ubuntu. The error message is listed below:====================BEGIN ERROR MESSAGE======================Error mounting: mount exited with exit code 12: Failed to read last sector (299982847): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
[code]...
View 8 Replies
View Related
Jul 12, 2010
I just installed Fedora 13 x85_64 on Intel s45sf server board with hardware raid and 8Gb memory. After installation and reboot I got the message: Error Loading Operating System I tried installation with no raid I doesn't work.
View 1 Replies
View Related
Feb 1, 2011
i actually registered here because i'm done with my knowledge of linux, errors which cause my sys to hang and/or reboot randomly after some time. They occur while the system is under heavy cpu, heavy mem-read-write, mediocre mem fill, heavy hdd io (for ~20 seconds every ~5 minutes).
problem background we ordered two identical PCs (specs below), one of them brought those sata errors quoted below from /var/log/messages, the other one runs flawlessly. Same Hardware and Software Configuration. Faulty one brought reallocated sectors right at start, mass seek errors, read errors. 1st try: swap cables, change bios mode ata_piix <-> AHCI. Didn't work. Went away for repair. Stupid Techie did only swap hdd, so problems occured again. Shipping for repair again. Board AND hdd exchanged. no more seek/read errors, no more reallocated sectors. But similar sata problems right after 3 days of previously described workload. Following logs are from after the last repair.
[Code].....
View 7 Replies
View Related
