Ubuntu :: Thunderbird Messages Don't Display Correctly
Aug 28, 2010
I am having problems with Thunderbird in Ubuntu Lucid. I am not sure since when. It could have been since I upgraded to Lucid from Karmic. When I open Thunderbird, a message pops up that is supposed to ask me for the password. However, it is all blank inside and doesn't display the text. I found that after I click on ALT+TAB a few times, the message displays correctly. This is very strange. Is anyone else having (or had) the same problem? Does anyone have an idea for a fix?I tried uninstalling and then reinstalling but it didn't work out (I didn't "purge" though).
View 4 Replies
ADVERTISEMENT
Nov 10, 2010
Problem-cannot mount 2 other samba computers on my ubuntu 10.04 via 'sudo mountall'. Additionally I now get Firefox/Thunderbird error messages as listed below. Had no problems with ubuntu UNTIL I attempted install of VirtualBox running WinXP client in my Ubuntu host. VirtualBox seemed to install ok but upon startup of WinXP client all I got was a black screen. To close it I had to do "Power Off" which VBox manual says is like a hard power off and is to be avoided. So I guess it's like I crashed XP within Ubuntu.
Now - ubuntu boots ok except will not auto mount other samba connected computers. Manually running 'sudo mountall' in terminal gives --
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } swapon: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18: swapon failed: Device or resource busy
mountall: swapon /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18 [2235] terminated with status 255
mountall: Problem activating swap: /dev/disk/by-uuid/24c4c591-47ec-44f1-ac52-c0e2f5850c18
retrying with upper case share name
mount error(6): No such device or address
Refer to the mount.cifs( manual page (e.g. man mount.cifs)
mountall: mount /media/samba_share [2239] terminated with status 32
Additionally I now get these warning messages when Firefox and Thunderbird start. (They do start and seem to work fine.)--
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Server ping error: IDLmg.org/CORBA/COMM_FAILURE:1.0)
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } What I've tried-
1) fstab UUID matches error UUID above and matches UUID from blkid command:
fstab =#Entry for /dev/sdc2 :
UUID=24c4c591-47ec-44f1-ac52-c0e2f5850c18 none swap sw 0 0
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; }
blkid = /dev/sdc2: UUID="24c4c591-47ec-44f1-ac52-c0e2f5850c18" TYPE="swap"
2) Reinstalled mountall from synaptic pkg manager; did not try to remove mountall and reinstall. To remove, removes LOTS of other packages from system - not brave enough to do that (yet).
3) Ran fsck on swap partition as below. Swap not found. (that confuses me.)p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } john@johndesk:~$ fsck /dev/sdc2
fsck from util-linux-ng 2.17.2
fsck: fsck.swap: not found
fsck: Error 2 while executing fsck.swap for /dev/sdc2
p { margin-bottom: 0.02in; page-break-before: auto; }p.cjk { font-size: 10pt; } 4) deleted all the files in ~/.dbus/session-bus. Ubuntu just rebuilds the same file back.
View 3 Replies
View Related
Aug 19, 2010
I am running thunderbird in lucid (64 bits) and I manage two hotmail account from it. One of them is fetching messages twice, meanwhile the other one works fine...is it double space in hard disk? Each message is repeated and one of the couple is marked as unread (new)...
View 3 Replies
View Related
Jun 28, 2011
I have two accnts in Thunderbird 3.1.10 in Lucid 64bit - gmail and itt-tech.edu (smtp.live.com). I removed apparmor because of the bug not allowing the file system to be mounted. I can send via gmail, not smtp.live.com. Smtp settings are correct. Any security package setting that might be hindering this mail send action?I have UFW installed.
View 1 Replies
View Related
Jan 25, 2010
Any way to get my sent messages out of gmail into my thunderbird. Right now it's getting my incoming messages perfectly using POP but I'm not syncing to my sent messages which is an issue because I have a lot of important stuff in my sent mail inside of gmail. Before I had it all in thunderbird (don't remember how) but I decided to try thunderbird 3 (couldn't keep it because calendar kept screwing up) so I downgraded and now I can't get those messages to show up again. I checked gmail and those sent messages are still there.
View 3 Replies
View Related
Jul 2, 2011
A long time ago Thunderbird had a plugin that blocked any message from being opened when the one viewed is deleted. It stopped working when the next update of Thunderbird came out, and I cannot remember it's name. The current version usually leaves a blank window when I delete, but sometimes will open a previously unread message. I normally delete spam before starting to read. If I have missed deleting a spam message it can be opened without clicking on it.
Recently I got stung by a sleeper. The messages were sent to addresses that have not been in the address book, and with a From name that has not been used for weeks. I have no idea when or how it was activated. Possibly one of the auto-opens. How do I prevent Thunderbird from automatically opening *any* messages?
View 4 Replies
View Related
Dec 1, 2010
I currently use mail-notification to alert me to new email, it sits in the system tray. When a new mail comes in it alerts me as such. I DO NOT have to have thunderbird open or running to be notified. I want to replace mail-notification with indicator messages. I want the same functionality that I got with mail-notification. That is, to have an icon sitting in the notification area that alerts me when new mail arrives. I do not want to have thunderbird open for this to occur.
I have lib-notify installed. I have the notify add-on installed in thunderbird, I have indicator-messages installed. I have thunderbird.desktop in /usr/share/applications I have a file called thunderbird that has one line which is the path to the desktop file above in /usr/share/indicators/messages/applications/ With this when i click on the icon in the notification area i DO see the listing for thunderbird, but the icon is not correct, it has a black bacground with a red circle in it with a slash. When i click on this item thunderbird launches. I do not recieve notificaion messages (i.e the letter icon does not turn green) unless i open thunderbird and check for messages manually. This defeats the purpose of having a notification in the system tray. Additionally changes made to /usr/share/applicatons/thunderbird.desktop are not reflected in the indicator.
View 9 Replies
View Related
Apr 13, 2011
(Ubuntu LTS 10.4) I have multiple mail accounts on Thunderbird (TB). All worked fine with no issues whatsoever. A few months ago it suddenly started giving me this alert message related to my yahoo.fr pop3 account
Quote:
The POP3 mail server (pop.mail.yahoo.fr) does not support UIDL or XTND XLST, which are required to implement the ``Leave on Server'', ``Maximum Message Size'' or ``Fetch Headers Only'' options. To download your mail, turn off these options in the Server Settings for your mail server in the Account Settings window.
Obviously I checked if these settings were somehow changed. They weren't. It should leave messages on the server indeed, but I don't use no max message size or fetch headers only options. The original settings are what they used to be and how they have always worked.
The thing is: everything works normal if I start up TB. It downloads the messages, puts them in the folders where I want them to come etc... The problem seems to appear after a while (mostly a few hours, or overnight). It just stops downloading the messages from my yahoo.fr account. When I click the Get Mail for my yahoo account the above alert message pops up.
There is only one solution really. Close TB and restart it after which all works fine again.
It might be that the problem is related to another issue reported as bug # 689453 in launchpad that started around the same time (a few months ago). That bug forces me to have to end the process through the System Monitor where Thunderbird-bin uses almost 100% of the CPU and doesn't shut down.
Obviously it doesn't avoid me from using TB, but it starts to work on my nerves to have to close down TB (sometimes through the End Process in system monitor) and then restart it so frequently.
View 2 Replies
View Related
Apr 26, 2011
I created a new account on laposte.net.
This account can receive messages but cannot send any from Thunderbird.
[url]
View 1 Replies
View Related
Mar 16, 2011
I'm trying to display my todo.txt file in my Conky, but it won't align correctly. Only the first line of the list is where I want it, the rest is in the default location.Quote:
background yes
update_interval 1
cpu_avg_samples 2
[code]....
View 8 Replies
View Related
Mar 31, 2011
I have a problem with getting the picture to display properly on my HDTV. Using the regular driver (whichever that is) the picture displays flawlessly, but when I'm using the NVIDIA driver it displays really weird. URL...As you can see the top and the right of the picture is missing, and there is a large black bar to the left of it.Since it only does this with the NVIDIA driver I guess the driver is at fault here. The graphics card is a 8400GS and I'm running Xubuntu 10.10. The HDTV has a native resolution of 1366x768, and I've connected to it using HDMI.
I have tried messing around with overscan compensation in nvidia-settings, but it didn't help much.What can I do to fix this?
View 5 Replies
View Related
Feb 1, 2011
Recently I am trying to install the latest Ubuntu / Xubuntu but after the kernel messages the display becomes corrupted. The machine is a Clevo laptop with the dreaded SIS 671 / 672 chipset. The Ubuntu 8.04 is working flawlessly. Any other version I get several problems and depending on the mood of the system I get a vertical running display ( not readable ) or a left horizontal displaced screen (readable) ...
I tried more tan several CDs ranging from 9.01 to 10.10 both Ubuntu or Xubuntu. What is the plainest (simpler ) VGA mode in order to install it? I have tried vga=normal and even VGA =3 with no success. With the latest Ubuntu 10.10 I get another problem it simply does not recognize the HDD / SSD. I have traced the SSD problem with the sata_sis module in kernel 2.6.35 and up... Other distros have the same problem ...
View 2 Replies
View Related
Feb 9, 2011
I have a LAMP installation for learning php and mysql. My online trainer pointed out that we always get a white screen when the php is wrong, when we should get error messages that say which line in the code is wrong etc.
I recently reinstalled mysql so it is the latest version from the repositories for Ubuntu 10.04.2 LTS.
Is there a way to make error messages show up?
View 3 Replies
View Related
Jul 18, 2011
I recently installed KDE and began using that instead of Unity (less buggy, IMHO) and it was running smoothly until I began configuring my GTK applications for transition in that. I installed the Oxygen-GTK them from gnome-look.org and set that as my default theme for GTK applications under the KDE appearance preferences.
When I log in, however, GTK applications just use the stock Xorg theme until I run "gnome-appearance-properties" in my terminal.I believe that a fix involving .gtkrc would suffice, but I honestly cannot configure it no matter how hard I try.
View 2 Replies
View Related
Jun 28, 2010
For some reason I am unable to get Thunderbird 3.0.4 to display html in a message. I can see the html code when I chose to "view source", but the message itself is totally blank. I am using Ubuntu Lucid.
View 2 Replies
View Related
Oct 23, 2010
I'm running TB 3.1.5. Images do not display in emails. There is no "Display Images" button. Where the images would be, I only get a broke image icon (the little torn page). I don't know if this is a Ubuntu specific issue, but I thought I'd post here because the community is so responsive. I have tried the solution at this site, but though the mail.default_html_action value is set to 3, I still have no luck. [URL]
View 6 Replies
View Related
Nov 13, 2010
I am running Ubuntu 10.04. for a few emails I receive thunderbird does not display the message body (header is OK). The emails where this happens are always emails where the message is there both as text/plain and as text/html as alternative. If I view the source, everything is there. I have tried to choose View->Original HTML / Simple HTML / Plain Text, but none of them worked.
View 6 Replies
View Related
Apr 19, 2010
I just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies
View Related
Apr 10, 2011
I had a problem with my OpenSUSE with Tumbleweed repository enabled that required me to do a hard power off of my ASUS N61JV-X2 notebook PC. I had Evolution running at the time. When I did a cold boot of my laptop and I ran Evolution again, it does not display my e-mail messages anymore. In fact, I had to install Mozilla Thunderbird with the Enigmail extension so that I can read and write e-mail messages.
How do I fix Evolution so that it will retrieve and display my e-mail messages and I can write new ones using this software package?
View 9 Replies
View Related
Feb 15, 2011
I've been getting messages, that should be in the dmesg log, on the console.This has been happening for a while, but I finally got tired of them.My system is Fedora release 14, Kernel 2.6.35.11-83 on an x86_64.When I reboot I get the following displayed with the login prompt.[ 52.492937] readahead-collector: starting delayed service auditd[ 52.795508] readahead-collector: sorting[ 53.033970] readahead-collector: finished
View 2 Replies
View Related
Mar 2, 2011
I have logged as e.g. user1 via ssh into my machine. Then I perform `su -` to switch to root user and I don't see debug messages which are normally displayed when I log as root via system console.How to display console messages in ssh session ?
View 1 Replies
View Related
Jun 7, 2010
When you view mail in evolution in the vertical mode with the folders on the left, then the mail list in the middle and the message on the right, the mail list displays each message on two rows. But in thunderbird, the mail list is just in one row which means that much of the message header is not visible.
how to get thunderbird to display message lists using two rows per message?
View 2 Replies
View Related
Aug 29, 2010
I installed the latest version of Thunderbird by downloading the tarball and copying the contents to the required folder and just point launchers to the Thunderbird file.
However I cannot get GNOME Do to run Thunderbird. When I type run in Gnome Do, I go through the entire list without having Thunderbird as an option. The only plugin I can find is one that allows you to copy Thunderbird contacts to the clipboard.
I have set Thunderbird to be my default mail client, so when I type an email address I can choose to compose a mail in GNOME Do, but just opening up Thunderbird to check mail is not possible.
View 6 Replies
View Related
May 1, 2009
I have a laptop that doesn't display correctly since installing F10 x86-64. Instead of using the i810 driver, I see the experimental intel driver. I am running on a Dell D630 laptop with the default intel integrated graphics.
Just to note: Running gnome. I tried KDE and I can actually get this to work and display in 1600x1200. I don't want, "well use kde then" to be the solution. Also, in gnome, if I go to the screen resolution option from the menu, the mirron screens is clicked. Even when I detect monitors and unselect the mirror screens and pick the correct resolution, when I click OK, the screen flickers, and I go back to the same screen with the original default values? Wierd.
I got the bright idea to install system-config-display (something like that), which installed fine. I then changed my default resolution to 800x640 just to try it (really want 1600x1200). Well, I decided to reboot. Not the laptop doesn't start, it stops right after loading anaconda, and just won't go any further.
So two questions:
1. What do I need to change to get the laptop to actually boot?
2. How to get the external monitor to display in 1600x1200.
View 1 Replies
View Related
Jun 18, 2011
I would like to have Icedove display the number of unread messages in the task/window bar when both active or minimized; note I am not interested in a system tray solution just yet. There must be a hack to do this right? Would it involve recompiling Icedove?
View 2 Replies
View Related
Mar 12, 2009
HP TouchSmart IQ500t
NVIDIA GEForce 9300M GS HD
Intel Core 2 Duo Processor T6400
Linux REL 4 64 bit OS
Tried installing latest NVIDIA driver (NVIDIA-Linux-x86_64-180.29-pkg2) from NVIDIA website for this video card, and the display was not appearing correctly. There was a lot of garbage at the top of the monitor. Half of the desktop screen was missing.
View 1 Replies
View Related
Mar 22, 2011
I'm running Kubuntu and have tested flash video sites with firefox, chromium and rekonq. I have installed all the available packages from Software Management but flash videos still don't display correctly. All get is a small rectangle of video on the bottom left hand side of the video box (which is otherwise grey).
View 4 Replies
View Related
Jul 31, 2010
I recently got the problem that Thunderbird does not displays the messages anymore. The e-mails are downloaded form the server, a new email warning is given, but the e-mail cannot be displayed (in fact it is not loaded in the message window. I could only see the TB start page). I cannot even see the old messages.
However, when use "see message source" I can see the e-mails.
I also noticed this message in the error console:
server does not support RFC 5746, see CVE-2009-3555
I use Fedora 12 + thunderbird 3.0.6-1
On another linux box F9+ThB 2.0.0 I do not have that issue.
Today I upgraded to Fedora 13 + TB 3.1.1. This should be the latest one, but I still cannot see the message.
Also, on F13 I got another issue with Firefox 3.6.7. When I switch between the tabs, the tabs will turn black and will not get back to normal for 10-15 sec. It looks liek a random effect because often only part fo the page turns black. This issue appear in the windows of TB 3.1.1 since updated to F13.
My hardware is a Sony SR49 laptop with ATI mobility Radeon HD3470
Have Google chrome and this black page issue is not present. The same with Evolution mail, but I do not like it.
View 1 Replies
View Related
Apr 23, 2011
I know that you can select from a list, groups from plasma "search & launch" - but is it possible to create and add other groups. Also is it possible to change the kmail at the top of the display to thunderbird, which I use.
View 3 Replies
View Related
Sep 17, 2010
I have gotten my project ubuntu server 10.04 up and running and logged in remotely with a terminal emulator program called AccuTerm that I use from work. It has multiple control files and want to know which file works best with ubuntu server. My reason for asking is some of the manual pages do not display correctly and keyboard functions seem to function incorrectly via VT100 and I have eighteen to choose from?
View 2 Replies
View Related
