I would like to have Icedove display the number of unread messages in the task/window bar when both active or minimized; note I am not interested in a system tray solution just yet. There must be a hack to do this right? Would it involve recompiling Icedove?
View 2 RepliesRunning Jessie 8.2 and Icedove 38.4.0. I just applied some updates and now Icedove only displays the number of unread messages in the folders.
Previously, it displayed the number of unread and the total number of messages in neat columns. Now it is a single number of unread in parens.
Is there any way I can get the display back to the previous format of unread# and total#?
Does anyone know if it is possible to have a folder/filter that will show unread messages?
View 1 Replies View RelatedIn the Evolution message list, all messages are shown in bold whether read or unread. I know it's supposed to only show unread messages in bold, but it shows read messages in bold too, so you can't tell between them. The read/unread flag is set properly - you can tell by right-clicking on the message and seeing whether it offers to toggle it to read or unread. But the font remains bold no matter what.
View 1 Replies View RelatedI'm about to make the switch to Ubuntu but what's holding me back is Liferea. From what I've read it's by far the best RSS reader but I'm having three major problems with it...
1) I am trying to get Liferea to download podcasts that I subscribe to. I've set my download folder in preferences, and I've set the feed to automatically download enclosures in the advanced tab of the feed folder. Nothing is downloading, why?
2) I want the 'Unread' search folder to display all feeds from all subscriptions (read or unread) apart from those in the Podcast folder I've created. How do I do this?
3) I read an article in a feed and delete the article. When the feed updates, the article returns - how do I keep it deleted?
I have a folder under Inbox in an email account, let's call it folder A, under that one I have subfolder B.
I cannot move emails delivered to Inbox to B, I can however move them to A.
When attempting to move them to B I get error:OVERQUOTA, not enough disk space.
This account is barely using 10% of allocated space, and using webmail I can move the email. but it will not show in icedove.
I have checked that subfolder is indeed subscribed, and I have no problem moving email around in other accounts.
If I close IceDove and then start it again, I get the message that it's already running. Although the GUI has gone, icedove-bin is still running.
View 4 Replies View RelatedI have been using icedove for quite sometime. Now I feel I need to also use the flexibility that mutt allows. In such a case, is there a way that mutt can read icedove mails, maybe via some plugin or other. I do not want to do the import icedove mails to mutt as there would be duplication of metadata and space.
View 1 Replies View RelatedWhen clicking in an e-mail on an http link the web browser doesn't open. I use Opera as standard web browser and Icedove ask me every time how to open. I have already done: update-alternatives --config x-www-browser" and choosen for Opera but this doesn't work. Is there an alternative way to tell Icedove that is must open weblinks with Opera.
View 1 Replies View RelatedI have had to revert my VM to a previous image (did something to screw it up) anyway I have to reinstall icedove into my VM and I noticed after doing: sudo apt-get update && sudo apt-get install icedove that icedove can't seem to be found in the libraries anymore and simply wont install.
View 14 Replies View RelatedI'm using Debian stable wheezy and icedove 31.5.0.
I have many different accounts set up on my icedove and sometimes I don't remember on which account I received the specific email I'm looking for, so I would like to be able to search through all my folders (say, absolutely all folders: all accounts, inbox, sent, trash, drafts, etc...).
Neither the quick filter toolbar, nor the "Search message" (Ctrl-Shift-F) feature seem to allow this. Now that's where the brand new shining "Global Search" (Ctrl-K) feature should be useful. However it does not seem to support partial match. So for instance if I'm looking for someone named "Lebenhaus GrossGrabenstein" but only remember that his name contains "Gross", the search through global search will return no result.
I'm pretty sure it was possible to do a proper search (with partial matching) accross all mails in previous versions of icedove, but I cannot find it anymore.
Right now the only workaround I have is to do a "grep -R" on my ~/.icedove folder, which is not very efficient and not flexible at all...
I recently reduced my /home by shrinking the LV and creating a new FS on /home. By this I deleted all data in /home of course, which is no problem. Though when I start Icedove now, I can't get past the welcome screen.
There is an input field to search for a provider for a new free mail account and 2 more buttons to either use an existing account or skip the whole wizard.
No matter what I enter or what button I press, the welcome wizard window stays put. Nothing works. Clicking the buttons turns them dark for the moment but nothing happens.
I did a Code: Select alldpkg-reconfigure on the package, have removed Icedove with apt's purge option, deleted the cached installation .deb etc., did an autoclean and so on... but no way to get past this welcome wizard at the startup.
The only way to get out there is to kill the process.
I cannot seem to find the keyboard commands to unlock the desktop in Debian Squeeze. What happens, is that when I try to open attachments in Icedove, without fail, the whole desktop locks up. I cannot access the terminal, as the mouse is frozen. In older versions, I used to use Ctrl Alt Backspace, on the keyboard and simply restart the desktop, but that command has no effect when using Squeeze apparently. I am running the amd 64 bit version if that helps at all.
View 3 Replies View RelatedI'm using Squeeze and icedove and iceweasel and I've installed the package linux-image-2.6.36-2.dmz.2-liquorix-686. It works fine on my Dell 1521 Inspiron laptop with only one exception. If I'm surfing the web or checking my mail via a wired internet connection I'm fine... if I'm surfing the web or checking my mail via a wifi connection everything is fine... but if I happen to forget to connect to a wifi connection, and I'm in a situation where a wired connection is not available, I can start iceweasel (it doesn't do anything constructive), but checking my mail with icedove (simply starting the program) crashes my computer.
If I boot up with the 2.6.32-5 kernel, the one that's in the regular debian repository, I can not duplicate the crash. Somewhere I read that the liquorix kernels are optimized for a desktop computer. Is this my problem? Is it something else?
During the crash my screen goes to a text console and I see syslogd messages on the screen -- which I cannot reproduce here.
How do I set the taskbar to display only the windows from the current desktop? I did it once before, but am on a new installation of my distro.
View 3 Replies View RelatedMy system is Debian Jessie,KDM,the icedove version is 38.6.0.
I used the Theme Font &Size Changer 44.2 add-on to configure the mail list font size.
I have 2 users,the add-on only worked well on one user. For another user,it could installed, but didn't show on the main view and could not set font size either.
Debian Jessie
Iceweasel 38.2.0
Icedove 31.8.0
Iceweasel and Icedove spontaneously crash, sometimes individually, sometimes together. Upon restart they will both run, but the amount of time they run before crashing again decreases with each crash. The way to extend use of these programs is to reboot Debian. (I typically run my computer 24/7 to run community service programs.)
How do I get these programs to run without spontaneously crashing?
I'm using icedove with the calendar extension. Since quite some time there is a pending update from 31.7 to 31.8 which is held back by apt:
Code: Select all> apt --installed list icedove iceowl-extension
Listing... Done
icedove/testing,now 31.7.0-1 amd64 [installed,upgradable to: 31.8.0-1~deb8u1]
iceowl-extension/testing,now 31.7.0-1 amd64 [installed,upgradable to: 31.8.0-1~deb8u1]
> sudo apt upgrade
Reading package lists... Done
Building dependency tree
[code]....
Seems like the problem lies with the package libvpx1. The correct version (>= 1.3) seems to be installed but under the name libvpx2.
Code: Select all> sudo apt install icedove
The following packages have unmet dependencies:
icedove : Depends: libvpx1 (>= 1.3.0) but it is not installable
E: Unable to correct problems, you have held broken packages.
> apt list --installed | grep libvpx
libvpx2/testing,now 1.4.0-4 amd64 [installed,automatic]
>
What can be done, or should the dependency in the icedove package be updated?
This began after I deleted my gnome configuration files. I logged out, logged back in, and Firefox and Icedove autostarted like they are supposed to. Firefox asked me if I wanted it to be the default browser, (which it was before), and I indicated yes. Now, whenever I click links in Icedove, a new Firefox window (rather than a new tab) opens and loads my homepage instead of the correct website. I've tried changing my default browser and then changing it back with xfce settings; Icedove opens links in Firefox regardless of the default browser setting. I've tried various changes to the setting
/desktop/gnome/url-handlers/http (and https) with gconf-editor:
/opt/firefox/firefox-bin %s (this was the setting when I first opened gconf-editor)
/opt/firefox/firefox-bin "%s"
/opt/firefox/firefox-bin "%u"
/opt/firefox/firefox-bin "%U"
None had any effect.I know that the urls in my e-mails are not the problem because the correct site loads when I copy and paste them.
Aptitude has upgraded Icedove to version 3.0.4 today on my squeeze-amd64 system. Debian's Enigmail package is conflicting with that version of Icedove, though, and won't install therefore. I can't install enigmail as an Icedove add-on either, because the add-on is telling me that the Icedove build type "Linux_x86_64-gcc3" ain't compatible with it.
View 1 Replies View RelatedI use LXDE and in the "preferred applications" I set icedove and iceweasel as preferred mail and internet applications but when I click on an e-mail link(craigslist in my case) not only does Icedove not open, but in Iceweasel HUNDREDS of blank tabs open up rapidly and it is difficult to kill the program. This is unlike any problem I've ever encountered so I'm not going to pretend I have a clue here. As I am familiar with Thunderbird in an other distro I would prefer to stay with IceDove.
View 9 Replies View RelatedI am recent convert from Arch GNU/Linux after deciding that it's free software or bust. I'm enamored by your project (free software + large user base + stable releases supported for many years = precious, one-of-a-kind distro) and hope I can soon start contributing.
Anyway, I'm on Debian 8.4 with MATE, only main repo enabled, all packages up-to-date. I turn on ibus (via a keyboard shortcut that runs "ibus-daemon -dx") when I need to type in Portuguese or Esperanto. When I'm done, I quit ibus either by right-clicking its tray icon and choosing "quit" or by using a keyboard shortcut to "killall ibus-daemon". Unfortunately, regardless of how I quit ibus, iceweasel and icedove crash every time ibus quits.
I tried running ibus with "ibus-daemon -d" instead of the above command. Now there are no crashes when I quit ibus BUT iceweasel and icedove ignore ibus altogether (i.e., I cannot type special characters--keyboard input is as if ibus were off).
How to start and stop ibus in a way that both a) causes it to work in all applications including iceweasel and icedove AND b) iceweasel and icedove don't crash when ibus quits?
I am having trouble getting evolution to work properly with my imap server. It won't show any messages. Icedove works fine, though. I'd rather use evolution because of the calendar. I'm not sure what I am doing wrong. The IMAP server is hosted by network solutions. I have screenshots of both clients. I've blacked out a few things for privacy.
Here are screenshots of evolution as configured:
Here are screenshots of icedove's configuration:
I didn't leave much space for the / folder during installation of squeeze and now I can't seem to copy over old profile folder from a windows install of thunderbird. Any way to change the location of the profile folder?
View 4 Replies View Relatedhttp links in email on Icedove don't open in Icewease using LXDE:
network.protocol-handler.app.http & network.protocol-handler.app.https are both set to the default x-www-browser, which is pointed to icedove but nothing happens, any suggestions?
I had a problem with my OpenSUSE with Tumbleweed repository enabled that required me to do a hard power off of my ASUS N61JV-X2 notebook PC. I had Evolution running at the time. When I did a cold boot of my laptop and I ran Evolution again, it does not display my e-mail messages anymore. In fact, I had to install Mozilla Thunderbird with the Enigmail extension so that I can read and write e-mail messages.
How do I fix Evolution so that it will retrieve and display my e-mail messages and I can write new ones using this software package?
I am having problems with Thunderbird in Ubuntu Lucid. I am not sure since when. It could have been since I upgraded to Lucid from Karmic. When I open Thunderbird, a message pops up that is supposed to ask me for the password. However, it is all blank inside and doesn't display the text. I found that after I click on ALT+TAB a few times, the message displays correctly. This is very strange. Is anyone else having (or had) the same problem? Does anyone have an idea for a fix?I tried uninstalling and then reinstalling but it didn't work out (I didn't "purge" though).
View 4 Replies View RelatedI've been getting messages, that should be in the dmesg log, on the console.This has been happening for a while, but I finally got tired of them.My system is Fedora release 14, Kernel 2.6.35.11-83 on an x86_64.When I reboot I get the following displayed with the login prompt.[ 52.492937] readahead-collector: starting delayed service auditd[ 52.795508] readahead-collector: sorting[ 53.033970] readahead-collector: finished
View 2 Replies View RelatedI have logged as e.g. user1 via ssh into my machine. Then I perform `su -` to switch to root user and I don't see debug messages which are normally displayed when I log as root via system console.How to display console messages in ssh session ?
View 1 Replies View RelatedRecently I am trying to install the latest Ubuntu / Xubuntu but after the kernel messages the display becomes corrupted. The machine is a Clevo laptop with the dreaded SIS 671 / 672 chipset. The Ubuntu 8.04 is working flawlessly. Any other version I get several problems and depending on the mood of the system I get a vertical running display ( not readable ) or a left horizontal displaced screen (readable) ...
I tried more tan several CDs ranging from 9.01 to 10.10 both Ubuntu or Xubuntu. What is the plainest (simpler ) VGA mode in order to install it? I have tried vga=normal and even VGA =3 with no success. With the latest Ubuntu 10.10 I get another problem it simply does not recognize the HDD / SSD. I have traced the SSD problem with the sata_sis module in kernel 2.6.35 and up... Other distros have the same problem ...