Ubuntu :: External Drive - Message - Error Mounting: Mount Exited With Exit Code 32
Mar 31, 2010
Accidentally the usb plug on my WD "My Book" got halfway unplugged and I didn't notice it. when I rebooted it, it wouldn't read the drive. I tried using G Parted to repair it but no success, it just runs forever accessing the drive and never finishes. (I left it running an entire weekend and it didn't finish) the drive is formated ext3.
When I try to mount the drive in Ubuntu 9.10 it gives this error message:
Strangely if I boot into Windows and use the ext driver I can access the drive just fine. is this something I can fix? if needed I can use Windows to do any repairs.
View 4 Replies
ADVERTISEMENT
Feb 27, 2011
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
View 4 Replies
View Related
Oct 23, 2010
I have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c
View 1 Replies
View Related
Mar 26, 2011
My computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.
Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)
View 4 Replies
View Related
Mar 29, 2011
my windows xp system has recently been messed up, everytime i boot, i see the windows logo and then it reboots so i decided to liveboot ubuntu in order to recover the important files on my hard drive and then reboot. Problem is when i try to click on my "500GB Filesystem" I get this message.Unable to mount 500GB FilesystemError mounting: mount exited with code 13:ntfs_attr_pread_i:ntfs_pread failed:/input/output error Failed to read NTFS $Bitmap:Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk/f on Windows then reboot into Windows twice.The usage of the /f parameter is very important! If the device is SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/directory(e.g./dev/mapper/nividia_eahaabcc1). Please see the 'dmraid' documentationfor more details
View 1 Replies
View Related
Aug 24, 2010
First of all: it's been more than 12 years ago since I worked with Linux, and a lot has changed in the meantime. But I considered it a challenge to install Ubuntu 9.10 and lateron upgraded to 10.04 LTS without any troubles, until now:
Except my main partition ("/") all other partitions fail to mount. All NTFS partitions from my other OS and also 2 other linux ext4 partitions I've made are not accessible anymore. and, what bothers me the most: I deleted those 2 new linux partitions in the meantime because I couldn't access them initially because Root was the owner (Duh! root is standard disabled in Ubuntu, right?). After an attempt to try to automount all partitions following the help guides I got now big grey errors on my splashscreen while booting, telling that an error occured with e.g. /media/Backup because it is missing or it cannot be mounted, with 3 options below: waiting, skipping or using a command prompt to solve this. I always choose Skip for safety.
Now if I want to see the content of all my other partitions I got a popup telling me unable to mount e.g. /media/Downloads and the message included:
[Code]....
View 9 Replies
View Related
Feb 12, 2011
I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
View 1 Replies
View Related
Aug 5, 2010
I have 2 internal drives. One is for the OS and one is for the Data. I tried to get the Data drive to mount automatically at login using some crap I found on a linux blog. Safe to say it didn't work and now I can't mount it with the OS on the OS Drive.
It mounts from a live CD and all the data is perfectly safe. When I try to mount the drive I get this error message: "Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/data" What have I done wrong and how can I make it mount again? Preferably this time at login.
View 2 Replies
View Related
Jun 1, 2010
I slipped on my expansion drive cable and it disconnected quickly, when I reconnected I got this error: Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
View 1 Replies
View Related
Jun 6, 2010
It seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
View 2 Replies
View Related
Jul 10, 2011
using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:
Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)
I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.
View 4 Replies
View Related
Oct 25, 2010
when i want copy something from dvd my debian squeeze is total slow cpu ussage is 100% and write 2.2 mb/s and musick is stop and play. This same is on burning cd /dvd the device buffer is an about 10-15% this dvd is Pionier 116D on windows xp work perfect. I try benchmark dvd form gnome-disk-utility but i got Error benchmarking: helper exited with exit code 1: Device /dev/sr0 is too slow to benchmark
[Code]....
( everything works on debian lenny on the old kernel 2.6.26 ) I instaling a few kernel and compiling 2.6.35.7 with .config file form ubuntu on finaly didn't help
View 1 Replies
View Related
May 2, 2010
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
View 9 Replies
View Related
Aug 20, 2011
Today I was trying to make a LiveUSB for Fedora 15 with UNetbootin and when I inserted my USB stick, it blinked and then this error appeared:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
View 1 Replies
View Related
Mar 20, 2011
I am a beginner in ubuntu and only recently did i install Ubuntu 10.10 using Wubi. I am dual booting along with Windows 7 64bit. Before I got to know of Wubi, I created a free 20GB partition for installing linux. But since it was of no use, I decided to extend another partition adding this 20GB space. The problem now is that I am getting the following error while trying to access the partition.
"Error mounting: mount exited with exit code 12: Failed to read last sector (605949951): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
or it was not setup correctly (e.g. by not using mdadm --build ...),
or a wrong device is tried to be mounted,
or the partition table is corrupt (partition is smaller than NTFS),
or the NTFS boot sector is corrupt (NTFS size is not valid).
Failed to mount '/dev/sda5': Invalid argument
The device '/dev/sda5' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?"
These are the results after running sudo fdisk -l /dev/sda:
"Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x76c4009c
Device Boot Start End Blocks Id System
/dev/sda1 1 1 992+ 42 SFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 1 13 102400 42 SFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13 6528 52326400 42 SFS
Partition 3 does not end on cylinder boundary.
/dev/sda4 6528 42717 290694144 42 SFS
View 6 Replies
View Related
May 16, 2010
my simpledrive external drive works fine on windows but i keep getting this error while mounting in ubuntu 10.04 with my account so i log in using the root account and this is what i get
[code]...
View 7 Replies
View Related
Nov 29, 2009
Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
View 1 Replies
View Related
Dec 25, 2010
I have a problem in my ubuntu 10.01 that it can't load a drive/volume in ubuntu. When I tried, it said: "Unable to mount location Error mounting: mount: /dev/sda1: can't read superblock". And when I boot my pc with 'Windows', it said : "UNMOUNTABLE_BOOT_VOLUME" under a blue screen. What can I do to solve this problem?
View 9 Replies
View Related
Jul 18, 2010
hi..
I'm using ubuntu 10.04 and whenever i start nautilus from command line it shows error:
Code:
root@aduait-laptop:~/Desktop# nautilus
Initializing nautilus-gdu extension
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
** (nautilus:9990): WARNING **: Error calling get_folders: Launch helper exited with unknown return code 1
View 5 Replies
View Related
May 7, 2010
i'm running ubuntu 10.04 and windows vista on my laptop and I installed Dos box on ubuntu quite some time ago, when i went to mount my d drive (like i usually do in windows) I got the error message "directory D: does not exist" i tried to fix it myself but i gave up because it wasnt that important. A while later i read on a webpage that "Linux doesnot employ the concept of drive letters" so i thought this must be the reason for this error message but why would there be dosbox for linux if that was the case
View 2 Replies
View Related
Jan 16, 2010
I'm trying to get ubuntu 9.04 to recognize a Maxtor One Touch III USB external hard drive. This drive has been formatted and used on a Windows XP. I cleared everything off but am trying to see if I can arrange it so that I can back up from linux and access (if need be) from a Windows machine.
Here is what I get with fdisk -l:
/dev/sda1 * 1 14219 114214086 83 Linux
/dev/sda2 14220 14593 3004155 5 Extended
/dev/sda5 14220 14593 3004123+ 82 Linux swap / Solaris
View 6 Replies
View Related
Mar 7, 2010
Output of blkid:
Code:
/dev/mapper/Tsunami_LVG1-LV_home: LABEL="home" UUID="cad22752-aca8-49c7-94b1-f08423819705" TYPE="xfs"
/dev/mapper/Tsunami_LVG1-LV_swap: TYPE="swap" UUID="5e1918d5-3a07-4dc5-8216-c4c0f4d1e341"
/dev/mapper/Tsunami_LVG1-LV_root: LABEL="root" UUID="cb276fc0-ced3-4926-81b8-757e5b68c4e5" TYPE="ext3"
/dev/sda1: LABEL="boot" UUID="d00cac4f-6873-4188-b6e2-902740454ba1" TYPE="ext2"
/dev/sda5: UUID="T2wwpd-lG9L-IrHz-BfAx-pVse-3C9a-rBjT1R" TYPE="lvm2pv"
/dev/sdc1: UUID="504A0C654A0C4A64" LABEL="SEAGATE300" TYPE="ntfs"
/dev/sdd1: UUID="F8C85616C855D38A" LABEL="Expansion Drive" TYPE="ntfs"
/etc/fstab contents: .....
Code:
fuse: failed to access mountpoint /media/tb1: Input/output error
View 2 Replies
View Related
Jun 24, 2010
I have a HDD from a CCTV system that I suspect to be Linux based. I cannot see it in Ubuntu. I can see the partitions in the Disk Utility. All it says is Partition type: Unknown(0xd4). I need to access this CCTV footage.
View 3 Replies
View Related
Jan 3, 2009
How to get a NTFS external drive to mount in Ubuntu.
View 9 Replies
View Related
May 25, 2010
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
View 9 Replies
View Related
May 5, 2011
How do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
View 2 Replies
View Related
Jan 2, 2010
I'm using Ubuntu 9.04, and I can't seem to get my ACOMDATA external hard drive to work. It is plugged into the PC using a USB cable, and it is read as a removable storage device on both Win. XP and Win. 7. On Ubuntu, it is read for a split-second, then disappears. All of my USB ports are functioning perfectly. Are there any commands to mount this device?
View 9 Replies
View Related
Mar 7, 2010
I have a Seagate Freedesk external drive. I formatted it to ext3 (as per several posts regarding this)However I cannot mount the drive. If I go "places" "computer" I can see the drive (simply entitled USB Drive) but if I try to open it it says "cannot mount the drive". If I right click and select "Mount Volume" I get Nothing. How can I get this to auto mount like other usb drives? I am using Hardy on a Compaq Laptop.
View 3 Replies
View Related
Mar 25, 2011
I have been trying to use fstab, writing a script in /etc/init.d to mount my external ntfs usb drive. I have had absolutely no luck and I have tried just about every solution I could find on the web except for writing a udev rule which I have never done so I am not exactly sure how.
My solution for the interim is to put the mount command in the rc.local file. That works, but I don't understand why I can use fstab to mount it. Putting it in the fstab gives me errors like "unknown file system" or just "An error occurred during mounting of drive" and then the booting stops. I tried using both ntfs and ntfs-3g.
View 5 Replies
View Related
Jun 19, 2011
I have attached a 1.5 TB external hard drive to my new Ubuntu server. I mount it in /media/external. I used sudo mount /dev/sdx# /media/external but sdx# keeps changing. I added a line to fstab to mount it permanently but after couple of our it unmounts itself and /media/external is empty. It is in vfat format but webmin shows it as ntfs.
Quote:
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code]...
View 9 Replies
View Related
