General :: OpenSuSe Fail To Start - No Message Logging
Jan 6, 2011OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
ADVERTISEMENT
OpenSUSE Install :: Window Managers Won't Start When Logging In From Kdm
Jul 12, 2010slash page comes up fine. KDM greeting page and username selector come up. I can choose a session.
If I choose anything other than 'failsafe' (KDE failsafe, KDE, TWM, IceWM, etc), it accepts my password and then just sits there
If I login via failsafe, then type 'startkde', KDE starts up fine and I get all my windows, virtual desktops, etc.
I also just noticed these installed as well:
Nothing in .xsession-errors
The only thing I could find in /var/log/messages that looked close was this:
OpenSUSE Install :: DomU (paravirt ) On LVM Fail To Start
May 19, 2010I am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
OpenSUSE :: Vsftp Dose Not Work In Machine - Fail To Start
May 24, 2011vsftp dose not work in my machine. I try to restart vsftp by command
Code: sudo /etc/init.d/vsftpd restart but it failed:
Code: Shutting down vsftpd done Starting vsftpd startproc: exit status of parent of /usr/sbin/vsftpd: 1 failed
OpenSUSE Network :: Named Fail To Start (jail) And Dhcpd
Sep 16, 2010Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
General :: Crontab Fail To Start?
Jun 22, 2010I type this 10,20,30,40,50 * * * * /root/auto.pl
my log file
Jun 23 10:10:01 localhost crond[7702]: (root) CMD (/root/auto.pl)
Jun 23 10:20:01 localhost crond[12022]: (root) CMD (/root/auto.pl)
Jun 23 10:30:01 localhost crond[14610]: (root) CMD (/root/auto.pl)
Jun 23 10:40:01 localhost crond[18676]: (root) CMD (/root/auto.pl)
Jun 23 10:50:01 localhost crond[22402]: (root) CMD (/root/auto.pl)
Jun 23 11:01:01 localhost crond[29476]: (root) CMD (run-parts/etc/cron.hourly)
but my application doesnt run at all. my script is in perl language
OpenSUSE :: Get The Message When To Start The VM?
Mar 6, 2010i have installed XEN and i want to install a VM winsows server 2008 but when i am creating from yast i get the message when i want to start the VM :
device 0 (vif) could not be connected Could not find bridge and none was specified
General :: DHCPD Service Fail To Start
Mar 14, 2010My dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....
Ubuntu :: Lucid Server - Fail To Login With A Timeout Error When Logging In Via Ssh
Jun 28, 2011I have multiple computers set up in my home (self education on networking) with one used as the main machine, and the others set up as a variety of server types. The main machine is running Lucid, as gui based os. The others are all running the server version. NO Domain controller is installed, no DNS server is installed.
ALL of the server machines boot to a login prompt, allow user name and password entry, and then will fail to login with a timeout error. After anywhere from 8-15 tries, the login will eventually succeed. Error also occurs when logging in via ssh.
General :: HTTPD Service Fail To Start In RHEL6
Jun 7, 2011I configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies View RelatedUbuntu :: Evolution Alerts Fail To Change Message Notifier?
May 28, 2011Upgraded to 11.04 a few weeks ago and after some tweaking found a way to adjust to the Unity shell. When I initially upgraded Im certain that when Evolution alerted me of an upcoming event, that the mail alert icon on the top panel would change to indicate the pending event. However, for the last few days Ive noticed that when Evolution alerts trigger I see the alert bubble, which quickly fades, but the mail alert icon does not change. If Im not right at my workstation when the alert triggers its easy to miss upcoming events. I googled around for a solution, but found nothing or missed it.
View 2 Replies View RelatedGeneral :: When Start Computer It Shows The Message OfINIT:No Inittab File Found?
Dec 22, 2010i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View RelatedDebian Installation :: Testing - All Logins Fail / System Error Message From The Passwd Command?
Mar 18, 2010I just installed Squeeze on an older PC. Installation seemed to go fine. But when it booted up on the installed system for the first time, I could not login - username/password failure. I tried every possible typing error and CAP LOCK error I could have made - still nothing.
I brought up a console window and tried logging in as root - same problem.
I booted into single user mode and entered passwd command to set new root password - I got a SYSTEM ERROR message from the passwd command.
I booted to a Live CD, went to /etc/shadow and deleted the encrypted password. Rebooted on the hard drive, went to console window and logged in as root, with no password required. So far so good. I entered passwd command to set new password and got the same SYSTEM ERROR message.
The machine seems fine when running on the Live CD, and the install seemed to go fine.
OpenSUSE :: After Reboot Suse10.2 Got A Error Message "Could Not Start The X Server"
Jul 12, 2010I used init 0 to make server shutdown,and replaced the power cord when I boot the server,it can't enter the GUI then I used init 5 and get the following message
Could not start the X server (your graphical environment)due to some internal error. contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart GDM when the problem is corrected.
Software :: Start Kontact Minimized In Kde 4 When Logging In?
Dec 16, 2008Kontact is automatically started when I log in to kde 4 and I would like to figure out how to make it immediately minimize to a tray icon. When I used kde 3.5 I had a script in .kde/autostart that ran a dcop call to close kontact, which effectively minimized it to a tray icon. I assume that I should be able to do the same now with dbus and a script using dbus-send. The problem is that I haven't been able to figure out the exact dbus call that I would need. Has anyone else tried to accomplish the same thing? I've googled but all the results I've found are for kde 3. I'm using kde 4.1.3 and kontact 1.3.
View 3 Replies View RelatedApplications :: HAL And DBUS Fail To Start
Jan 21, 2010I don't know if this is the right place to post this but here goes anyway.
System:
ASUS Pro50n Laptop
Distro: Arch Linux
WM/DE: Gnome
I've recently installed Arch linux with the gnome desktop environment, and everything is working fine apart from HAL and DBUS. I'm not sure why this problem is happening and I have no idea about any settings for HAL and DBUS all I know is what it says in the wiki.
The problem I have is that HAL and DBUS fail to start. I have tried /etc/rc.d/hal start and get the message BUSY.. then FAIL. I have tried /etc/rc.d/dbus start and get exactly the same. I have tried restart and that also fails. *EDIT* I have just tried /etc/rc.d/dbus start again without changing a thing and dbus has started successfully but HAL still fails.
The further problem, which I think is related to HAL not starting... possibly... Is that I can't watch DVD's / anything in the DVD drive. I can see it in Places >Computer as "CD/DVD Drive: 3_MEN_IN_ANOTHER_BOAT" but when I click to load it or if I open Totem and try and load it all I get is the error: Unable to mount location: Not Authorized. Is this related to HAL or is this a completely different issue?
*EDIT* fixed the HAL problem, reinstalled xf86-input-evdev package and it seemed to fix the problem. However I am still having a problem with watching DVD's
Debian :: Administrative Tasks Fail To Start
Sep 4, 2010Over the past few days, I've noticed that administrative tasks sometimes fail to start. I'm asked to enter the administrative password, "Granting rights" appears in the bottom panel for a few seconds, but then disappears. I'm using Debian Lenny. This is only an intermittent problem, and if a task does fail to start, it will start on the next attempt. Tasks which have failed to start are:
*Launching Synaptic form the System menu.
*Launching a root terminal from the Applications menu.
*Launching Nautilus with root privileges from a terminal using gksu.
After coming across the following post, I thought maybe it was an issue with kernel 2.6.32-bpo.5-686, because I'd recently upgraded to that kernel too, but I'm advised that that isn't so.It was suggested that something else from backports might be causing the problem.
Server :: NFS Service Start Fail - No Such Device
Dec 23, 2010rhev-h starting NFS service why occur under issue message?
[root@RHEV ~]# /etc/init.d/nfs start
Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK]
Starting NFS daemon: [FAILED]
[root@RHEV ~]# tail /var/log/messages
2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading
2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory
2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
Software :: Freeradius Fail To Start Because Of Ssl Error
Mar 7, 2010I have installed freeradius from repositories in both Debian and Ubuntu. I have built from source with 'fakeroot dpkg-buildpackage -b -uc' on both the official freeradius source code and the source provided by apt-src in both Debian and Ubuntu. On a normal install via aptitude there is no ssl-support, I understand this is because of license issues. Otherwise is works, but is of course useless in a wifi-auth setup. On a install from source code, after editing debian/rules and debian/control as recommended different places on the net, freeradius fail to start because of ssl error. Same on install via source code downloaded directly from [URL]... Anyone have a working ssl-enabled freeradius server running Debian or the likes?
View 1 Replies View RelatedDebian Multimedia :: Gnome-shell Does Not Start Logging In Via Gdm3 Greeter
Oct 8, 2015Some days ago (2015-09-28) I installed Debian testing amd64. Log in as a user failed and instead of the Gnome UI there was a sad face with the text: „Oh no! Something has gone wrong. A problem occurred and the system can't recover.
All extensions have been disabled as a precaution. Log out“.
The relevant output of journalctl (run as root) said:
etc/gdm3/Xsession[5379]: cannot connect to brltty at :0
- /etc/gdm3/Xsession[5379]: Service 'org.kde.kaccessibleapp' does not exist.
- gnome-session[5379]: x-session-manager[5379]: WARNING: Application 'gnome-shell.desktop' killed by signal 5
- gnome-session[5379]: x-session-manager[5379]: WARNING: App 'gnome-shell.desktop' respawning too quickly
- x-session-manager[5379]: Unrecoverable failure in required component gnome-shell.desktop
[Code] ...
After some investigating, I found three work-arounds.
(1) Use gdm3-autologin: In /etc/gdm3/daemon.conf, remove the double crosses and insert own user name
AutomaticLoginEnable = true
AutomaticLogin = <own user name>
Disadvantage: Only one user can have access to the Gnome ui. If you log out, you enter the gdm3 greeter and … see above.
(2) Turn off gdm3 by running 'systemctl stop gdm3' as root, log in into a terminal as a user and run startx.
(3) Install package lightdm and make it to the standard display manager with 'dpkg-reconfigure lightdm'.
Disadvantage: Energy manager and screensaver settings of the Gnome control center are ignored.
The easiest way, however, especially if there are several users, is logging in via the gdm3 greeter.
Fedora X86/64bit :: Services Fail To Start Continuously
Aug 22, 2010I have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
View 14 Replies View RelatedUbuntu :: Python Based Programs Fail To Start?
Oct 30, 2010since it started i cannot launch software-center, vlc, emesene... they all stopped working... i checked the logs of synaptic to see if i removed a python package and i didn't. i tried selecting all python packages for reinstall, and it didn't help! i really don't want to reinstall ubuntu.
View 9 Replies View RelatedOpenSUSE :: Click On Install Get The Following Error>>Message Did Not Receive A Reply (timeout By Message Bus)?
Nov 10, 2010Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedUbuntu :: Text Terminal Unreadable - Can't Start Gdm Even After Memorizing The Process Of Logging In And Starting Gdm
Jul 9, 2010My terminal text is unreadable. Where as the default output would usually fill half the screen it probably fills around 1/20th now. Basically it looks like the text is 1px in size. I was about to install a graphics driver (nvidia) but doh I can't see what I'm typing... I can't start gdm even after memorising the process of logging in and starting gdm (I think gdm is failing to start anyway) I'm using the default xorg.conf provided with the LiveCD;
[Code]....
Ubuntu :: Wireless Constantly Fails \ Reboot But It Will Start To Fail Again?
Mar 19, 2010reason my wireless is constantly failing. the only solution is a reboot but it will start to fail again. I use hp mini 210 ubuntu netbook remix.here is a log file
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (
[code]...
Software :: Fail To Start Cyrus IMAP - Operation Not Supported
May 18, 2011I have a problem when trying to start Cyrus IMAP (on Ubuntu server):
#./master &
[1] 1171
[1]+ Exit 1 ./master
I got a message from /var/log/message:
May 18 16:26:44 ldap master[1146]: process started
May 18 16:26:44 ldap master[1146]: unable to setsocketopt(IP_TOS): Operation not supported
Software :: RAID5 Fail To Start Array After Power Failure
Apr 23, 2010I am having a RAID5 with a spare(total 4 disk).then the steps which lead me to a problem:
1. i was doing I/O on the array.
2. i pulled out a drive manually. So the spare drive took care of the failed one and started rebuilding. then
3. in the, mean time i pulled out the power plug of my NAS box.
4. After power up i saw my array was not active(by -D command option of mdadm). then
5. i executed: mdadm --assemble --scan /dev/md0 it gave me
I checked into the linux source and found that bd_claim is a function inside fs/block_dev.c and it failing due to which lock_rdev function (calling bd_claim in md.c) is failing and we are not able to start the array.I don't know why my RAID is not live after power on.
Plese help atleast can i save my data?
CentOS 5 :: Solution Cluster Fail To Start Virtual Services After Upgrade To 5.5?
May 16, 2010After upgrading Centos 5.4 cluster nodes to 5.5 all virtual services failed to start. All virtual services are marked as 'failed'. The reason: new /usr/share/cluster/vm.sh requires 'which', but this is not reflected in rgmanager-2.0.52-6.el5.centos.
Solution: run 'yum -y install which' on all nodes, and reboot cluster. Hope that will save somebody hours of downtime.
OpenSUSE :: Get A Message That Says 'Search Service Not Running' With A Button That Says 'Start Search Service'?
Jun 12, 2010The desktop search has stopped working in Gnome.I get a message that says 'Search Service not running' with a button that says 'Start Search Service'.When I click the button nothing happens
View 1 Replies View RelatedGeneral :: Installing OpenSuse - Gave Me An Error Message?
Dec 3, 2009I downloaded opensuse from opensuse.org(the DVD), and when I tried to install it gave me an error message. When I saw the file on the mirror, it was 4.7 G, but when I burned it, I did notice it was only 4.2 Gs.
I tried another download and again it was only 4.2 Gs, how or where can I obtain a working installable DVD of OpenSuse?