I added a script to /etc/init.d/local and made it run at boot using:
Code:
update-rc.d local defaults 80
Is there any way for me to make it NOT run when the server is rebooted/halted?
The system asked me to reboot and I just shut down the computer.Some hours ago, I wanted to start the computer and the system halted after the first logo showed of Ubuntu, after 15 minutes waiting, nothing happened. I tried to push keys on the keyboard, nothing helped (I even couldn't put on CAPS or num lock on the keyboard).After a secoind reboot I didn't even saw the Ubuntu logo. When there's a black screen, it just sits there.I have no idea if there was a kernel update (I assume there was, because the system wanted me to reboot)
View 6 Replies View RelatedThere is something that I am not getting here. I get the following when I try to start my XP virtual box stuff. I take it that I actually need an XP disk to do this?
FATAL: No bootable medium found! System halted.
Here is a capture of what I have setup for XP virtual.
Uploaded with ImageShack.us
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
View 2 Replies View Relatedwe have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.
View 6 Replies View RelatedI'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
On Windows 7, I have VirtualBox running Linux (Ubuntu 8.04), with Samba set up so that the Windows host can access it. But if the virtual machine is shut down & restored, or rebooted, the Windows Network no longer shows it. I've tried refreshing many times, restarting Samba, disabling/enabling the virtual network adapter, and running the succession of commands ipconfig /release, ipconfig /flushdns, & ipconfig /renew, but none worked. As a last resort I could restart the host itself, but is there a better way?
View 3 Replies View RelatedI am trying to make start an iptables.cf script on my server.
I have copied it into /etc/init.d/
And try to make it load with /etc/init.d/iptables.cf start
Then "not permission" (I was the root then).
So, sudo /etc/init.d/iptables.cf start
Then, "command not found".
Morning all , not sure how to put this. I have a .sh executable script I use for video encoding. I want the system to be able to see it no matter where in which folder I am. I want to be able to execute that script in terminal in any folder. How can I make it part of the system path. ? Don't know if my wording is right but I think you guys know what I mean.
View 9 Replies View RelatedEvery time I start up Docky, it blacks out the bottom part of the screen, and gives me a notice that says, "Docky requires compositing to work properly. enable compositing and restart Docky." How would I do this?
View 8 Replies View Relatedi have RHEL4. i m facing problem that all the previous command history is deleted when i restart the server or relogin the server. it is happening with all the users not with any one user.
View 2 Replies View RelatedWhenever I start debian it runs fine until it gets to the DHCP part.It completley stops and spends like three minutes with stuff like
Code:
DHCP Request on port 57 interval 4
DHCP Request on port 57 interval 14
[code]....
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
View 1 Replies View RelatedI have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies View RelatedIn bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.
View 4 Replies View Relatedgetting foll error during 'make' part of compilation of mysql v5.5.6rc
Code:
libtool: link: unsupported hardcode properties
libtool: link: See the libtool documentation for more information.
libtool: link: Fatal configuration error.
code....
Ubuntu 10.04 has halted at screen showing progress graphic (Ubuntu name + 5 circles), it just keeps cycling thru this. No disk activity. I booted using live CD, Gparted detected the hard disk. What should I do next? Do a Gparted check and repair? That's assuming it's a disk problem but perhaps it's something else.
The motherboard is fairly old, about 6 years, it's an Aopen AX4SG-N with 4Gb RAM, but it goes thru the bios boot OK, no complaining beeps etc.
I'm thinking of a complete reinstall but would like to check other possibilities first (and maybe work out what happened).
Some time ago I've opened a thread about ACPI - as it turned out - killing my server. You may read it here if interested.My question is how can I enable Hyperthreading support in my kernel without enabling any part of ACPI?(Boot flag acpi=ht causes the same issue as described in above thread, so enabling any part of ACPI in any manner is not desirable)My kernel:
[root@sheridan ~]# uname -a
Linux sheridan.******** 2.6.35.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
I using an old 1999 PC 512 MB RAM used to have W-2000. I had difficulties getting CD to be boot drive. I had to remove floppy drive to stop it from being the first drive. I'm using the Linux Starter Kit with Ubantu Live 9.10. My PC was having issues so I skipped the dual boot and went straight to a clean install. I had to double click on WUBI in the disk directory to get the install started. Install appeared to be going fine about 60%... then I got distracted to fix lunch for sick kid. When I came back screen was black and I could not wake up screen with mouse or keyboard. I turned off PC.. restarted and have message that says NO ROM BASIC System Halted.
View 3 Replies View RelatedThe computer went into low graphics mode all by itself and then later threw a error that said incompatible processor system halted!the computer was getting really slow and made alot of noise.later the computer did something stranger..it restarted but normally when my computer normally restarts it bypasses the password page setup in bios of the computer. This time I still had to enter a password before it could reboot.Another thing...when it the ethernet cable was connected to the computer (internet connection was on) it was slow when it was unplugged it was not.I have read that unless you're running a server or something it is highly unlikeley you'll be hacked.
View 8 Replies View RelatedI have Fedora12 with dual boot WinXP on my laptop. Everything was working fine but suddenly one day I booted up my system and selected Fedora from boot menu , an error screen came - "[...]ERROR: tried to remove a fb that we didn't own Boot has failed, sleeping forever"
I don't know why It's happening ? The last thing I did on Fedora was to install some packages to start Wi fi and It was working fine from last 2 months, then why suddenly this bug ?
I googled about it but most of the cases are of Live CDs or USBs but in my case I had a whole different space assigned in my hdd for Fedora and everything was supercool.
Does it mean I have to do a fresh install of fedora12 again ?
I need a webserver (LAMP) running inside a virtual machine (#1) running as a service (#2) in headless mode (#3) with part or the whole file system encrypted (#4).The virtual machine will be started with no user intervention and provide access to a web application for users in the host machine. Points #1,#2 and #3 are checked and proved to be working fine with Sun VirtualBox, so my question is for #4:Can I encrypt all of the file system and still access the webserver (using a browser) or will GRUB ask me for a password?If encrypting all of the file system is not an option, can I encrypt only /home and /var/www? Will Apache/PHP be able to use files in /home or /var/www without asking for a password or mounting these partitions manually?
View 2 Replies View RelatedI'm trying to install office 2003, but I get a lot of errors
Code:
juan@joker:~/Desktop$ wine Office2003SP3.exe
C:windows emp7zS17a.tmp>cmdow.exe @ /HID
File not found
C:windows emp7zS17a.tmp>copy OGACheckControl.dll c:WindowsSystem32OgaCheckControl.dll /Y
C:windows emp7zS17a.tmp>setup.exe TRANSFORMS=UnattendedOT.MST /qb /noreboot
fixme:imm:ImmDisableIME (-1): stub .....
err:msi:ITERATE_PublishAssembly Failed to copy temporary assembly: 2
err:msi:ITERATE_Actions Execution halted, action L"InstallExecute" returned 1627
C:windows emp7zS17a.tmp>EXIT
I've been searching and all installations were made with 1 or 2 commands well, that's it. I only need to run excel with VBA support. The rest I do it with openoffice.
I've just upgraded my wife's netbook to UNR 9.10. This seemed to go well and the netbook has been working fine since. Yesterday my daughter used the netbook with out any issues, but when my wife tried it halted during boot with:
Swap waiting for UUID: xxxxxxxxxxxxxx
After a couple of reboots it started working fine, but looking at /etc/fstab the entry for swap is different to the UUID shown in blkid Do I just update fstab with the UUID from blkid?
I Run Fedora 11 and i have problem after shutdown computer. My computer cant power-off, just show "System Halted".
PC Model : Compaq Presario SR1400CF Desktop PC.
I'm trying to install 10.10 64bit on a DFI X48 mainboard with 8Gb RAM, I've tried installing from the Desktop CD, Alternate CD and USB stick, but all attempts fail with
uncompression error
-- System halted
I've run memtest86 and the RAM passes OK, I've even tried running the install with just 4Gb RAM but without any luck. I've even tried three different CD/DVD drives.10.04 64bit runs from the Live CD without any problems, but 10.10 isn't playing ball...
Since yesterday my computer behaves really strange. I fear it's a hardware issue. At most I did some minor updates, but no big software or OS change.
When I turn it on it goes immediately to [url]
I guess it reads
Code:
Chasis intruded
Fatal Error... System Halted.
So this happens before the boot manager... When I press the reboot button it goes to the boot manager and works seemingly fine - all I noticed that it doesn't remember the time, or better remembered the time form the last usage but doesn't count it forward. While using the time seems to pass in a normal speed.
What could this be? Some chip on the mainboard broken? Some BIOS virus (does something like that exist?) Or maybe just a cable which got lose?
I don't know which other informations could be helpful. I built it myself some years ago and the parts are pretty random (back then I didn't even know about linux compatibility nor used it at all). I have a dual boot with openSUSE 11.2 and windows xp, but the network card is deactived in xp for a year at least already.
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
I'm running Ubuntu 9.10, and using wbar as my dock, and when i boot up my computer and log-in I like to have my dock there instead of opening it. Is there a way to make it open automatically right when I log in?
View 1 Replies View RelatedHow do I make something start on boot? I remember there being a command.. nano something, can anyone tell me?
View 3 Replies View Related