Software :: Server Hosting Different Part Of Web Site Must Appear As Part Of Domain
Jul 13, 2009
we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, email@example.com has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
I'm having a mare with SSL with Apache. I have set it up and if I go to the follwoing address http://192.168.1.2 it seems to work and the pages are delivered to my browser. However if I try to access it from an exernal PC it will not work.
I can get to the non-ssl part of the site so the static ip is resolved and the port forwarding all works.
Does any one have any ideas (and in fact i think I may have just solved it - Ports - 80 mis open but I haven't done anything with 443. Will check it out and post back.
I installed Postfix, Roundcube (webmail) and Dovecot. Postfix stores the e-mails in maildirs located at /home/postfix/maildir/[user]@[domain]. Now I set the mail_location configuration option in Dovecot to: mail_location = maildir:/home/postfix/maildir/%u@%d The problem I run into is logging in with [user]@[domain]. Right now I can only login with [user] (without @[domain]), which makes the mail_location invalid (no e-mails can be found). How could I configure dovecot to use the domain name as well as part of the username?
I am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
Some time ago I've opened a thread about ACPI - as it turned out - killing my server. You may read it here if interested.My question is how can I enable Hyperthreading support in my kernel without enabling any part of ACPI?(Boot flag acpi=ht causes the same issue as described in above thread, so enabling any part of ACPI in any manner is not desirable)My kernel:
[root@sheridan ~]# uname -a Linux sheridan.******** 220.127.116.11-83.fc14.x86_64 #1 SMP Mon Feb 7 07:06:44 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
Just wondering if it's possible to do virtual hosting without a registered domain name. I'm running slackware 13 and just trying to do it like this in my vhost config:192.168.15.149/test1.phpand 192.168.15.149/test2.php
I need a webserver (LAMP) running inside a virtual machine (#1) running as a service (#2) in headless mode (#3) with part or the whole file system encrypted (#4).The virtual machine will be started with no user intervention and provide access to a web application for users in the host machine. Points #1,#2 and #3 are checked and proved to be working fine with Sun VirtualBox, so my question is for #4:Can I encrypt all of the file system and still access the webserver (using a browser) or will GRUB ask me for a password?If encrypting all of the file system is not an option, can I encrypt only /home and /var/www? Will Apache/PHP be able to use files in /home or /var/www without asking for a password or mounting these partitions manually?
I'm using Ubuntu Server (32bit) on a machine at home. I've bought a domain name(s) via Heartinternet.co.uk and my ISP is Bethere.co.uk I have installed my LAMP Server on my home based server and it's accessible via my static IP address. HTTP is forwarded on my router to my Ubuntu (web)Server. Now then, in laymen's terms, I want my domain name to resolve to my Ubuntu Server. I have installed and configured Bind9 to this guide found online: http://goo.gl/M3Pk i understand that I need to do this in order to 'host' the domain name. Or alternatively, if my presumptions are correct, I could leave the domain name with the registrar and use their DNS config panel to add an A record to point at my webserver (static IP address)???
If I forward port 53 (default for DNS) to my server (after setting up bind9 correctly) and within my domain name hosting options change the nameserver settings to point at my static ip address then would this be enough to host my domain from my home network?
I feel I nearly have a whole picture but...not quite. There's a multitude of vague guides on the internet (vague or I'm not reading them properly!)
How do e-mail clients know whether or not an e-mail is part of a thread? (For example, Thunderbird can fold e-mails into threads.) Do they just guess based on the Subject line, or do they know for certain based on an e-mail field? I was planning to tackle some more advanced filter programming on my Postfix server.
1) should questions about websites be posted here or the therver platform forum?
2) I'm trying to host a website from an old computer I have. I'm running Ubuntu 10.04; I have installed the LAMP package. I've made it's ip address static on my router (linksys WRT160nv3). I can ssh into it from my desktop on the same home network.
I've been following this guide: URL... I'm trying to make the server public. I've set up DMZ on my router to forward to my server's local ip address.
So now, after going to whatsmyipaddress.com, I can log onto my server from my desktop, which is on my home network, but not anywhere else.I'm fairly sure that my ip address from my ISP is dynamic, but it hasn't changed in the last hour.Let me know if you need anymore details. I'm very new to all of this.
my laptop is kinda broken and the right part of my 1440x900 display doesn't work anymore (all black). I think i have around 1200x900 left on the left side. Is there a way to tell X to only use those for displaying the desktop?Does this work with other application using "fullscreen" ?
Is there a way I can use my Flash Drive as part of my Hard Drive? Can I merge them together or something? To make my hard drive go from 20GB to 22GB? I know it is a petty 2GB but it would mean the world to my PC... I would like to increase my partition to include the Flash Drive to... can I do that?
would the following command wipe an entire drive clean (partition table included)? Code: dd if=/dev/urandom of=/dev/sda bs=512.I was wondering what the 'bs' part means? Would it be better to omit that?
I was trying to delete a printer software package and some how managed to do away with part of my system.Guess I clicked on something I shouldn't have.Before I realized what was going on about a page of deleting this and that zipped by before I aborted.Is there a way of finding out what was deleted so I can put it back together?The stuff in my home folder is still intact, so if I have to do a new install it's no biggy.Just hoping I wouldn't have to.Had to reinstall dolphin just to see that the home folder was still there and intact.
I have Evolution contact manager, works well but I cant seem to see the bottom of the screen, its cut off. Is there a way to change the screen size (particularly the Contact/Editor/Personal Information as I want to access the "notes" part of the application" Opensuse Gnome 11.1 on Lenovo S10e Netbook!
i have 4 different harddriveparts (i hope that is the correct translation), on my PC, one for the OS (ubuntu) and 3 others for programms and documents for example. But now i need to go in a folder on another part in the console.
The other part has the id E61441A014417519, so i would guess that the order you have to enter would be: "cd mediaE61441A014417519folder" and then i would be "in" the folder, but the console said that there is not even a folder named "E61441A014417519".
I know that the question could sound weird but...I was wondering if is possible to download one or more parts of a file.
For example, the first 10 mb, or the latter ones.
I know that there are some apps that let you do segmented downloads, but, is there anyone that let you choose the segment to be downloaded? If not, can this be accomplished with any linux command-line application?
I have blocked all connection with iptables and allowed only the loopback: iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP
Next I want to allow only ssh connections, and also I want to record the IP address of each attempt to access port 22 using the recent module. Then I want to to see if that IP address has attempted to connect 2 or more times within the last 60 seconds, and if not then the packet is accepted: iptables -A INPUT -p tcp --dport 22 -m recent --set --name ssh --rsource iptables -A INPUT -p tcp --dport 22 -m recent ! --rcheck --seconds 60 --hitcount 2 --name ssh --rsource -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 -j ACCEPT iptables -A OUTPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --sport 22 -j ACCEPT iptables -A INPUT -j DROP iptables -A OUTPUT -j DROP
I'm trying to extract .part files. These are mac extensions similar to .rar or .zip. I need to extract a whole bunch of them simultaneously. Theyre probably registered in sequence just like .rar files. What program can I yum install or where should I look to extract these to what will probably be an ISO.
I am trying to set up a free wireless network for clients for a small business. I have a wireless router that I plan on hooking up to our main router. I want to keep all the computers that are associated with the wireless router from being able to access the rest of the network hooked up to our main router. I think one solution might be to put the wireless router in a DMZ. I think this should isolate it from the rest of the network (and have a side-effect of sending outside traffic to the wireless router, which shouldn't matter). Will this work? Also, if I just make both routers have the same subnet (e.g. 192.168.1.x), will my wireless router just filter out requests for computers on our main network as requests for (non-existent) computers on its local network? Any other ideas are welcome.