getting foll error during 'make' part of compilation of mysql v5.5.6rc
Code:
libtool: link: unsupported hardcode properties
libtool: link: See the libtool documentation for more information.
libtool: link: Fatal configuration error.
code....
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
I've downloaded and installed MySQL-client-5.1.53-1.glibc23.x86_64.rpm. I'm rather new to linux so it might be I haven't started the server. Unfortunately I have no idea which file is responsible for that. It is also possible that my head isn't functioning correctly ( if at all ).
Error I receive is:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I have mysql downloaded and when I type mysql into the command line I get this:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
I'm trying to install snort-2.8.5.3 on centos5-i386 an I get this error from ./configure --with-mysql --enable-dynamicplugin command:
ERROR: unable to find mysql headers (mysql.h)
checked in the following places
/usr
/usr/include
[Code].....
I've read here it has to do with libmysqlclient12-dev. How can I install libmysqlclient12-dev on centOS?
Is it possible to install snort from repositories using yum?
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I have about 5k of data i need to update.. this in my current database:
[URL]
I want to change it to this:
[URL]
So basically, I want to change only part of the URL, not the entire URL.. is there a way to do this? so only this part of the first url:
[URL]
to
[URL]
I wrote a code in C to connect to MySQL by using mysql_real_connect function but I recieved error "Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)" (by using mysql_error function).
I also did the following things: in mysql I typed 'SHOW VARIABLES LIKE '%SOCKET%'', it returned /var/lib/mysql/mysql.sock I typed 'mysql_config --socket' in shell, it returned /var/lib/mysql/mysql.sock I modified /etc/my.cnf file
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
[code]...
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
I was having issues with MySQL Server and uninstalled it. I still have my databases at /lib/var/mysql.
My question: if I install MySQL Server (same version, 5.1) again, will it delete my databases, or will they still work?
How can I really, really remove everything related to mysql / mysql-server. I read and tried all kinds of things, but on every reinstall there is still old mysql stuff there, for example an existing password. Even resetting the password does not help.
Reason of removal: it looks like the mysql setup is really corrupt, so I want to remove, and then do a fresh install. Running Ubuntu 11.04 64-bit
sander@R540:~$ sudo apt-get purge mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mysql-server is not installed,
[Code]....
How do I create a new mysql user and a mysql database at the shell prompt?
View 1 Replies View RelatedMysql starting problem after changing mysqladmin password.I tried all the solutions available on forums, but not solve the problem.At last I restored the mysql db backup, this make mysql service start, but till other databases not showing all tables.
View 1 Replies View RelatedPam-mysql can not connect to the database and below are my configurations.
saslfinger -s Output:
root@mailbackup:/# saslfinger -s
saslfinger - postfix Cyrus sasl configuration Tue May 10 10:12:10 EAT 2011
version: 1.0.2
mode: server-side SMTP AUTH
-- basics --
Postfix: 2.7.2
System: Slackware 13.1.0
-- smtpd is linked to --libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x00007f74ebfb7000)
-- active SMTP AUTH and TLS parameters for smtpd --
-- listing of /usr/lib64/sasl2 --
-- listing of /usr/local/lib/sasl2 --
-- content of /usr/lib64/sasl2/smtpd.conf --
-- content of /usr/local/lib/sasl2/smtpd.conf --
-- active services in /etc/postfix/master.cf --
-- mechanisms on localhost --
I have the latest LAMP running on F10 but need to do a database conversion from mysql 4.1.22 to mysql 5 for a client.
View 4 Replies View RelatedI have install mysql on my fedora12. My different mysql server is located in us. I want to check health status and hits per seconds everything. Is it possible with mysql-administrator command.
now a these days i am connect through ssh and excuting below command
#mytop mysql -u root -p <passwd>
In my mysql db i have added the userip & passwd (allowed the privileages for that ip)
If i use mysql-administrator i am getting below error
MySQL Error Nr. 2003
Can't connect to MySQL server on '66.98.152.64' (111)
I have tried many different ways to interact with the mysql to reset the root mysql pass. This is what I got to right now
Code:
#!/bin/sh
newpass=$1
service mysqld stop
mysqld_safe --skip-grant-tables --skip-networking &
echo "use mysql;" >> /tmp/mysql_pass_reset.txt
echo "update user set password=PASSWORD("$newpass") where User="root";" >> /tmp/mysql_pass_reset.txt
[Code]...
I'm trying to setup wordpress on my server, which of course I need mysql for. I setup a database the other day, which worked perfectly, but I had to start again as I put some information in wrong. Now, I can create a database fine, but when I run
Code:
GRANT ALL ON wordpress.* TO wordpress@localhost IDENTIFIED BY "password";
I get the output:
[code]...
I thought that the problem is in the phpMyAdmin not in the mysql. But now i think different. It seems that the problem is right in the mysql. I think that there was no root user, when mysql was freshly installed. Unfortunately i did everything i can find on internet (some tutorials) but they don`t helped me at all, maybe i fu**ed up the mysql service. So i reinstalled it, and when i want to start it there is no file mysql.sock and i get the following:
linux-nepg:~ # service mysql restart
Restarting service MySQL
Shutting down service MySQL done
Starting service MySQL warning: /var/lib/mysql/mysql.sock didn't appear within 30 seconds
I can't get mysql to update from lenny (mysql-5.0) to squeeze (5.1). apt tries to start the server but comes up with some kind of configuration script error.
View 1 Replies View RelatedI installed mediawiki the other day and went with the default innodb option. However a week later something went wrong. And since I have scripts that nightly backup /var/ I just copied the backup of /var/lib/mysql/wikidb/ (as I've done with MyISAM). Then when I connect the wikidb database. I can see the tables (via "show tables"), but when I do any query with them (check table X, select * from X) I get:
Code:
Table 'wikidb.X' doesn't exist I've since read that can can't just copy the database directory like MyISAM, and there appears to be no way that I can find to restore or fix Innodb, without a dump of the data. And I never got a chance to do a mysqldump of the data. So has anybody got any idea how I can at least view the "page" table from the files I've backed up in /var/lib/mysql/wikidb/ ?
I've installed MySQL using yum on CentOS 5. I'd like to upgrade mysql-5.0.77-4.el5_4.2 to MySQL Community Server 5.1.47. What is the best way to upgrade?
View 2 Replies View RelatedI am trying to install php-mysql but I am getting conflicts. I manually installed
MySQL-shared-community-5.1.32-0.rhel5
MySQL-client-community-5.1.32-0.rhel5
MySQL-server-community-5.1.32-0.rhel5
and I can not seem to find a php-mysql that works with MySQL 5.1
I followed the below thread and added the CentOS-Testing.repo and did a yum update php and it updated 30 packages, but when I try to install php-mysql I get :
[URL]
yum install php-mysql
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
[Code].....
Where can I find a php-mysql that works with MySQL 5.1? I checked the mysql website and can not seem to find any matches.
I'm simply trying to compile a vanilla kernel from Kernel.org, I've done it before, however "make menuconfig" returns an error after I've made my changes to the config file.
Code:
Why is make returning that error? I am using a 64-bit kernel.
