Ubuntu Networking :: Cannot Connect To Other PC By Entering Its IP Address Into Location Either
May 5, 2010
Two machines with Lucid installed last week, both installed with the same standard settings. One machine can see the network and both itself and the other machine, the other PC cannot see the first machine or itself. In the Network window all I get is a folder saying 'Windows Network' and clicking that ticks away for a minute or so before saying error, cannot connect to it.
On both machines I have created a shared folder on the desktop to trigger an installation of samba shares which has happened.I cannot connect to the other PC by entering its IP address into location either.
View 3 Replies
ADVERTISEMENT
Aug 21, 2010
while configuring the yum through proxy i was configures with some address(10.x.x.x). after the proxy address has been changed(172.x.x.x).according to new proxy address i made changes in all locations in my system. but when i am trying to download through command line still it is trying to connect old proxy address(10.x.x.x). finally i come to know that, still some location old proxy address (10.x.x.x).is there.
how to troubleshoot this issue.(how to find the location) i was try to debug find the output below DEBUG output created by Wget 1.11.4 Red Hat modified on linux-gnu.
[Code].....
View 1 Replies
View Related
Mar 27, 2010
I have noticed that I am not the first one to have problems with samba and connecting to a Windows PC. I have read so many articles and I have tried a couple of things that seemed to make sense, but no luck.
I can connect from my Vista to my Ubuntu netbook remix, but not the other way around. I get the error message: "Unable to mount location", "failed to mount windows share" and I get "mount error 12 = Cannot allocate memory" in Smb4K.
There was a suggestion that "mount error 12 = Cannot allocate memory" indicated it was a problem originating in Vista, but the added registry values on my Vista PC that was suggested didn't change anything. I have also read and [URL] and implemented 3.1 and 3.2 but it made no difference either.
View 4 Replies
View Related
Jun 16, 2011
am trying connect to server via ssh after entering the password it's just keep stuck !!!
*** NOTE : i was using the server and am sure about the user name and password ...
View 5 Replies
View Related
Jan 24, 2011
I have a school project that requries me to bypass MAC filtering by changing my MAC address.I changed my mac address through the following:
Code:
sudo service network-manager stop
sudo ifconfig wlan0 hw ether 00:11:22:33:44:55
[code]....
View 2 Replies
View Related
Jul 29, 2011
I have installed openvpn on an ubuntu 10.04 server. I run 11.04 on my desktop. It can connect to my VPN server. The problem is, I have ZERO internet access. I cannot even ping an IP address.
View 5 Replies
View Related
Feb 13, 2011
I have a problem with Samba. I've already configured my SMB.conf file, but I can't connect to my Windows shares by their host name. for example: if I try to connect to GDEA73-PC-1 share = netshare, server connection fails. if I try to connect to 192.168.1.171 then share = netshare, it works. How do I fix this? When I run findsmb, I am on the GDEA73 NETWORK workgroup as I configured, but my local PC is the only one on it...
View 2 Replies
View Related
Sep 30, 2009
Router: Linksys WRT54GS
NIC: D-Link DWA-645 (RangeBooster N 650 NoteBook Adapter)
i have successfully changed my MAC address. By doing:
ifconfig wlan0 down
ifconfig wlan0 hw ether AA:BB:CC:11:22:33
ifconfig wlan0 up
When I do:
ifconfig wlan0, it shows my new MAC address.
After changing, I cannot connect to the Internet. I have already disable mac filtering in my router. What did I miss out?
View 5 Replies
View Related
May 19, 2009
I am running 2.6.27.21:170.256.fc10.i686 on my laptop.
I am trying to connect to a network at a university in China right now and I cannot figure out how to connect.
IP: 192.168.213.179
subnet mask: 255.255.255.0
default gateway: 192.168.213.1
DNS: 202.202.96.33
DNS: 61.128.128.74
View 5 Replies
View Related
Jan 22, 2010
I'm connecting to my wireless, but I can't connect to the Internet, not even via an IP address.
(*) Can not open web pages via IP address.
(*) Can ping internal hardware no problem.
(*) I can connect to the Internet via Ethernet no problem.
(*) I used to be able to connect via wireless on this computer. No settings changed in the interim.
(*) Several other computers currently connected & accessing Internet via the same wireless - no problem.
(*) Based on other posts, I disabled the avahi daemon, but this had no effect.
Outputs of some commands:
[Code]...
View 8 Replies
View Related
Jul 27, 2010
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
View 4 Replies
View Related
May 27, 2011
I have been trying to wirelessly connect to my network for weeks now. My netgear dongle is fully working. I have installed the driver using ndiswrapper. I can see my network and signal is excellent; everything is working perfectly. When I try to connect it thinks about it but never connects. The password is fine; it works great with other computers. decided to have a go with wicd, so got rid of the Gnome network manager and installed wicd. Adaptor and wicd appear to be working brilliantly EXCEPT I cannot connect. wicd tells me its a bad password. Password fine because it works brilliantly with every other device I connect to my network. If I remove security from network, it tells me it cannot get address, even though it sailed passed that with no problem when there was security. I have searched the internet for a solution to this problem time and time again. Lots of people seem to be having this problem, but no one knows the solution. Is there a solution? It happens with both Ubuntu 10.04 LTS v1 v2 and Ubuntu 11.04. What the heck is going on. This happens with WPA WEP and anything else I try to use
View 1 Replies
View Related
Mar 15, 2011
In my working environment have 40 system .Its ip address is given manuallyto connect each for lan connection .40 are not using ubuntu while other using windows .My question is there any package to trace ips of entire system
View 9 Replies
View Related
Apr 9, 2011
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
View 5 Replies
View Related
Jul 8, 2011
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
View 2 Replies
View Related
Dec 26, 2009
For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command
And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?
View 7 Replies
View Related
Jan 31, 2010
I've only been using linux for a few days so I don't know all the tricks. I'm pretty savy configuring windows networks however.My adapter is (according to windows) a: CNet PRO200WL PCI fast ethernet adapterLinux says it is a: 21x4x DEC-tulip compatible 10/100 EthernetI do seem to be getting an ip address from the DHCP router, but I cannout ping any other ips or connect to the internet.I've tried a bunch of different options, switching things back and forth, but it still doesn't work, and honestly i don't even know what some of the options mean.
ALSO, if this helps:
paladin:~ # ifconfig eth0
Eth0 Link encap:Ethernet HWaddr 00:08:A1:03:3C:99
[code]....
View 14 Replies
View Related
May 31, 2010
In Fedora 12/11 there used to be a button in the Nautilus to the left of the address/location bar which would let me switch between two representation of location bar: 1) buttons 2) as string that I can type in.
In Fedora 13 I cannot get the same behaviour. The button is missing and location only shows up as a set of buttons.
I have looked in the settings of Nautilus, but couldn't find anything related to this. How do I get location bar to show up as a string where I can manually type the path?
View 3 Replies
View Related
May 18, 2010
Can someone recommend software that can be used to map the geographic location of a given ip address range?
View 1 Replies
View Related
Aug 22, 2010
I have openSUSE 11.3 Gnome installed. The nautilus address bar shows the "Button Bar" and if I press Ctrl+L it swaps to the "Text Location Bar". The Text Location bar is where you see the full path to the directory that you're viewing.But I can't set the default addressing to the Text Location Bar.What else should I do to get the text location bar (i.e. the full path) to be the default view in the address bar?
View 4 Replies
View Related
Apr 17, 2010
I am experiencing a 5-10 minute delay when trying to ssh into my ubuntu server.
root@localhost's password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Requesting no-more-sessions@openssh.com
debug1: Entering interactive session. HANG
I've tried using the option UseDNS No in my my sshd_Config but to no success. I've tried reinstalling ubuntu fresh, but still it hangs upon trying to ssh from any machine. I am running Ubuntu 9.10 server.
View 7 Replies
View Related
Apr 19, 2010
Well, first off I'd like to say that I am much happier with the wireless on Ubuntu 10.04 than I was on 8.10 (the last time I tried Ubuntu). However, there is a small annoyance I'd like to fix: every time I log in, I get a prompt saying that an application (the wireless network manager) is requesting the password for such-and-such keyring. I have to enter the password before I can connect to my network. Is there a way to get around this somehow so that I don't have to enter the keyring password for this keyring (the "default" keyring) every time I log in?
View 3 Replies
View Related
Feb 24, 2010
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
View 5 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
May 12, 2011
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
View 1 Replies
View Related
Apr 24, 2010
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
View 2 Replies
View Related
May 7, 2010
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies
View Related
Oct 6, 2010
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies
View Related
Jun 7, 2009
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies
View Related
