Since I have not gotten anything on the "General Help" I am posting this here: When a Ubuntu 10.10 I have starts up apache2, MySQL and postfix start properly but bind9 doesn't. Once booted is I run 'sudo /etc/init.d/bind9 start' it starts. The only thing odd on this system is I have a "inet6 v4tunnel" interface defined in my /etc/network/interfaces. From booting in the syslog there is:
Even with the bind debug level at set at 90 I do not get any more in the logs that what I posted before. The lack of errors in the logs is giving me no idea where to start. I commented out the IPv6 tunnel interface and rebooted and still no help. bind still is not starting at boot. OK, it is not a permissions issue, I have changed the config and zone files to be owned by bind:bind, root:bind, root:root and bind:root and it has made no difference. Doing a fresh install on a Virtual Box VM and configure it in a similar manner bind9 starts normally. (I am almost to the point where I will rebuild the box)
I am running centos 5.3 with the latest bind, i have made some changes in the config and now it wont start.
Fel i named-konfigurationen:/etc/named.conf:27: unexpected end of input (last line) My named.conf looks like this: options { directory "/var/named/"; }; view "externt" { match-clients { any; }; recursion no; zone "dala.hk" { type master; file "dala.hk"; }; zone "0.0.168.192.in-addr.arpa." { type master; file "1.0.168.192.in-addr.arpa"; }; }; view "intern" { match-clients { 192.168.0.0/8;}; zone "intern" { type master; file "intern; }; };
How would I make sure cron is running every time my server is turned on? I want to make cron jobs, but I need to know that it is running when the server boots. Also, I used a program at some point that was terminal based and it showed be what programs ran when the server booted up. It allowed me to check a box and select which programs I could run at boot. If someone could tell me this program,
I have a file server running samba 3.4.0. I just upgraded ubuntu to 9.10. The upgrade was unfortunately stopped in the middle, but I think I managed to complete it.The problem is that now samba will not work after a reboot. The daemons are running, but any attempt to connect from a windows machine fails (Windows 7: the network path was not found). Manually restarting the service fixes the problem, but I need a more stable solution!Interestingly, I can ssh to the machine, or rdp to a virtual machine running on it.The logs don't seem to report any error:
I am trying to get SQL-Ledger installed and running on my computer, which needs PostgreSQL installed to run.Currently, I am having trouble with it starting at boot-up. How can I access the appropriate log files in order to figure out what's wrong?
Also, I need to know what httpd is, and who the owner and groups using that might be on my system.
So recently my MySQL server doesn't startup when Ubuntu boots (it used to) and therefore causes database errors with my Web applications. How do I add MySQL to the run at startup list?
I am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is
[Code]....
Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.
Running Ubuntu Server 9.10.I have a couple of programs that I would like to start at boot, they will both run forever. I have created a cron job with @reboot and that will start a program, but if I have multiple programs in there it waits for the first to finish before starting the next.
I recently installed an Ubuntu 10.04LTS server. I have zabbix-server on that machine, and I noticed that after reboot it won't start. Probabily, the mix of upstart and old init.d scripts result in zabbix starting when mysql is not active yet, in fact in zabbix-server.log I see it cannot reach db. How can I make sure zabbix-server waits for mysql?
Just upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to
Im install bind9 in ubentu 10 with this turotial [url]my dns server is work in linux but my client user cannot use dns when client run nslookup in cmd Cannot find server name for address my_ip_linux :server faild Server: Unknown. im on linux valid ip
when i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
using Ubuntu Server 10.10 x86_64 on this machine. It is used as a master DNS server for my domain. We have migrated it to Ubuntu from Gentoo. The problem is that AppArmor is spamming /var/log/syslog
Code: Jan 3 14:38:40 hydra kernel: [2154828.893409] type=1400 audit(1294061920.141:660146): apparmor="DENIED" operation="mknod" parent=1 profile="/usr/sbin/named" name="/var/log/named_querylog" pid=15397 comm="named" requested_mask="c" denied_mask="c" fsuid=103 ouid=103 The zone files reside in /etc/bind/ and we have not changed anything in /etc/apparmor.d/usr.sbin.named .
We don't want to just uninstall apparmor, but how do we adjust its settings correctly?
And I have a very long debuging log file I will not post unless requested. I also have added a ufw allow from all to all rule for testing purposes only.
I am migrating my server from Kloxo (lxadmin) to Ubuntu (webmin/virtualmin), and I already had my Nameservers on my register (Godaddy) to go to [URL] and [URL] along with my IP. (I set the ttl to 60 cuz I thought that might be a problem) Now, I do a dig [URL], it gives me this output.
I'm having trouble getting dhcpd to update DNS records in bind9. I'm not seeing any journal files created for bind9. The following appears in syslog when a client machine connects to the network:
Code: Jun 26 04:07:22 ubuntu dhcpd: DHCPDISCOVER from 00:23:df:44:78:83 via eth0 Jun 26 04:07:23 ubuntu dhcpd: DHCPOFFER on 10.0.0.112 to 00:23:df:44:78:83 (Computer1) via
I operate a home network with Ubuntu Server 10.04 with services including DHCP3, Bind9, Apache, and so on. Since I host several dozen websites from home, I have to run Bind DNS. All Ubuntu boxes on my network operate fine. However, all Windows boxes on the network seem to forget to look internally for DNS after a couple of page loads on my internal sites. The network settings still indicate that my internal domain name server is the first lookup and everything seems normal.
The onlything I could find after scrubbing the internet is once ina while there's a missing bracket. But I have checked and triple checked my config files and the syntax and can't find anything wrong. I have another installation of bind9 running on Fedora and the same exact syntax works just fine.
Im using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
messages appear in syslog each day. Each URL has from 2 - 6 attempts at various ipv6 addresses. My question is why is bind9 trying to resolve ipv6 addresses? I have done nothing to enable or disable ipv6 and thought that if not explicitly enabled I would not have to be concerned with it.
I am having trouble with setting up BIND9 for 6 virtual servers that use ubuntu x64 v10.10. I have main server running ubuntu as well. host name is xeonserver I would like to explain my setup first.
my router ip: 192.168.1.1/24 host server for VMs ip: 192.168.1.2/24 Then on qemu my virtual machines are in 10.0.0.0/24 network, gateway to my router is 10.0.0.1
1. kerberos.xeonserver (not configured yet) 10.0.0.2 2. dns.xeonserver (the one I have trouble with) 10.0.0.3 3. mysql.xeonserver (not configured yet) 10.0.0.4 4. apache.xeonserver (not configured yet) 10.0.0.5 5. ftp.xeonserver (not configured yet) 10.0.0.6 6. mail.xeonserver (not configured yet) 10.0.0.7
To configure it I followed instructions found on [URL]
I have installed bind9 for DNS. I have also installed Apache2, PHP5, MySQL, and correctly configured these together. When I view domain1.co.uk it currently works fine as required. I would like to change it to: * /var/www/domain1.co.uk/prod/ - becomes the root dir of domain1.co.uk * /var/www/domain2.co.uk/prod/ - becomes the root dir of domain2.co.uk
Nevertheless, I have created a the following files; these are copies of the "default" file and correctly amended. the required destination directories are in place! * /etc/apache2/sites-available/domain1.co.uk * /etc/apache2/sites-available/domain2.co.uk
I then executed: Code: sudo ln -s domain1.co.uk ../sites-enabled/domain1.co.uk Code: sudo ln -s domain2.co.uk ../sites-enabled/domain2.co.uk
It is important to understand domain1.co.uk and domain2.co.uk represent 2 Existing domain names I own, and both point to my server. domain1.co.uk currently works in /var/www Why I would like multiple domain names on the server.
I'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.
I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:
I have set up a new IP specifically for SSH and configured SSHD_Config accordingly to listen on this new interface and a specific port. However when I reboot SSH is not starting. Looking in the syslog it shows that it is unable to start. It looks like its trying to listen on the interface before it is set up.
Code: Nov 29 13:00:23 anubis init: ssh main process (601) terminated with status 255 Nov 29 13:00:23 anubis init: ssh main process ended, respawning Nov 29 13:00:23 anubis init: ssh main process (610) terminated with status 255 Nov 29 13:00:23 anubis init: ssh main process ended, respawning Nov 29 13:00:23 anubis init: ssh main process (618) terminated with status 255 Nov 29 13:00:23 anubis init: ssh respawning too fast, stopped
I am able to start SSH manually once the server is booted. Do I need to set up my interfaces differently to ensure they are available prior to SSH starting somehow? I don't want to change my ssh config to listen on all addresses.
How can I start multiple X servers by logging into same user and using same desktop environment like KDE or GNOME. Is this possible by editing .xauthority, .xinitrc etc files?
I am facing a problem with my AT91SAM9260 customized board. Board is almost same as the evaluation kit.
I could download the binaries ( Bootstrap-v1.16, u-boot-1.3.4, linux kernel 2.6.20) successfully to the DATAFLASH/NANDFlash in my board by using atmel SAM-BA tool with usb/serialport/jlink.
Here I describe the problem.
When I power up the board, boot strap is not jumping to U-boot location, in the normal boot sequence and board stuck with bootstrap.
But when I disconnect/connect the JTAG USB cable ( provided with SAM-BA ICE) , it's jumping to u-boot location and booting the board properly. I'm getting the same error in NAND FLASH also.
I have tried one more test case.I copied bootstrap binary at the flash location, [location which is specified for u-boot binary] instead of U-boot.bin (location: 0x8400 in dataflash), I got continous bootstrap debug messages in my console. [ So can I conclude SDRAM doesn't have any problem? ]
My mysql server won't start on my machine. It simply fails with no errors. Code: sudo /etc/init.d/mysql restart * Stopping MySQL database server mysqld [ OK ] * Starting MySQL database server mysqld [fail]
When I run cat /var/log/mysql.err the file is empty, thinking this might be a permissions issue I tried chowning to a mysql user. Here's the current permissions. Code: ls -alh /var/log/mysql* -rw-r----- 1 mysql adm 0 2009-09-30 11:08 /var/log/mysql.err -rw-r----- 1 mysql adm 0 2010-01-15 09:07 /var/log/mysql.log -rw-r----- 1 mysql adm 20 2009-11-25 07:35 /var/log/mysql.log.1.gz -rw-r----- 1 mysql adm 20 2009-11-24 07:59 /var/log/mysql.log.2.gz -rw-r----- 1 mysql adm 20 2009-11-23 07:56 /var/log/mysql.log.3.gz -rw-r----- 1 mysql adm 20 2009-11-22 07:54 /var/log/mysql.log.4.gz -rw-r----- 1 mysql adm 20 2009-11-21 07:47 /var/log/mysql.log.5.gz -rw-r----- 1 mysql adm 20 2009-11-20 07:43 /var/log/mysql.log.6.gz -rw-r----- 1 mysql adm 20 2009-11-19 07:35 /var/log/mysql.log.7.gz
/var/log/mysql: total 8.0K drwxrwsrwx 2 mysql adm 4.0K 2009-09-30 11:08 . drwxr-xr-x 16 root root 4.0K 2010-01-15 10:24 .. Still having the same issue, mysql server is still failing and /var/log/mysql.err is still empty.
