Ubuntu Servers :: Bind9 Fails To Redirect Only Windows?
Aug 28, 2010
I operate a home network with Ubuntu Server 10.04 with services including DHCP3, Bind9, Apache, and so on. Since I host several dozen websites from home, I have to run Bind DNS. All Ubuntu boxes on my network operate fine. However, all Windows boxes on the network seem to forget to look internally for DNS after a couple of page loads on my internal sites. The network settings still indicate that my internal domain name server is the first lookup and everything seems normal.
View 2 Replies
ADVERTISEMENT
Oct 31, 2010
Location and syntax of named.conf in Ubuntu's version of BIND 9. I already have an HTTP server (in the form of Apache) along with forum software set up on my Acer netbook. However, the only way I can access the forum software is if I type in my IP address. How do I set up my named.conf to get the IP address to redirect to a domain? I already have my resolv.conf configured to allocate a domain to the IP address, but testing the ping of the site returns a "No such domain" error.
View 1 Replies
View Related
Apr 3, 2010
when i try to set up bind9 to resolve the top level of the name it cant do it. for current sake of arguement i have 4 servers on the network
192.168.0.200 diana.undernets.lan
192.168.0.201 jen.undernets.lan
192.168.0.202 amanda.undernets.lan
192.168.0.203 alex.undernets.lan
those are the IP addresses of the servers and their respective hostnames
so if i send a request for anything to just undernets.lan it will fail because there is no record for that. so i added this to the bottom of the zone record
Code:
IN CNAME amanda
thinking that a blank would refer to the top of the zone
here is my named.conf.local which is called in my named.conf
Code:
zone "undernets.lan" {
type master;
file "/etc/bind/undernets.db";
};
zone "0.168.192.in-addr.arpa" {
[Code]....
i want to be able to lookup undernets.lan and it give me the IP address of amanda.undernets.lan
View 3 Replies
View Related
Sep 6, 2010
Im install bind9 in ubentu 10 with this turotial [url]my dns server is work in linux but my client user cannot use dns when client run nslookup in cmd Cannot find server name for address my_ip_linux :server faild Server: Unknown. im on linux valid ip
View 5 Replies
View Related
Apr 20, 2010
I want to make BIND9 aware of my TLD so I need to give it an A record. Then I wanted to create CNAME for ftp, mail and so on as time permits
I have webmin so I need to work from that.
my TLD is [URL]
I wanted to bolt on www, ftp for now
www is port 80, ftp port 21 etc
View 1 Replies
View Related
Oct 6, 2010
when i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
View 4 Replies
View Related
Jan 3, 2011
using Ubuntu Server 10.10 x86_64 on this machine. It is used as a master DNS server for my domain. We have migrated it to Ubuntu from Gentoo. The problem is that AppArmor is spamming /var/log/syslog
Code:
Jan 3 14:38:40 hydra kernel: [2154828.893409] type=1400 audit(1294061920.141:660146): apparmor="DENIED" operation="mknod" parent=1 profile="/usr/sbin/named" name="/var/log/named_querylog" pid=15397 comm="named" requested_mask="c" denied_mask="c" fsuid=103 ouid=103
The zone files reside in /etc/bind/ and we have not changed anything in /etc/apparmor.d/usr.sbin.named .
We don't want to just uninstall apparmor, but how do we adjust its settings correctly?
View 5 Replies
View Related
Mar 2, 2011
Since I have not gotten anything on the "General Help" I am posting this here: When a Ubuntu 10.10 I have starts up apache2, MySQL and postfix start properly but bind9 doesn't. Once booted is I run 'sudo /etc/init.d/bind9 start' it starts. The only thing odd on this system is I have a "inet6 v4tunnel" interface defined in my /etc/network/interfaces. From booting in the syslog there is:
Code:
/var/log/syslog:Feb 28 19:02:42 ubuntu named[1029]: starting BIND 9.7.1-P2 -u bind -d 9
/var/log/syslog:Feb 28 19:02:42 ubuntu named[1029]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind'
[code]....
Even with the bind debug level at set at 90 I do not get any more in the logs that what I posted before. The lack of errors in the logs is giving me no idea where to start. I commented out the IPv6 tunnel interface and rebooted and still no help. bind still is not starting at boot. OK, it is not a permissions issue, I have changed the config and zone files to be owned by bind:bind, root:bind, root:root and bind:root and it has made no difference. Doing a fresh install on a Virtual Box VM and configure it in a similar manner bind9 starts normally. (I am almost to the point where I will rebuild the box)
View 9 Replies
View Related
Apr 11, 2011
I have googled for hours and can not find an answer to what this means.
dig @172.16.255.254 twitter.com.
; <<>> DiG 9.7.0-P1 <<>> @172.16.255.254 twitter.com.
; (1 server found)
;; global options: +cmd
;; Got answer:
[Code]...
And I have a very long debuging log file I will not post unless requested. I also have added a ufw allow from all to all rule for testing purposes only.
View 6 Replies
View Related
Apr 26, 2010
I am migrating my server from Kloxo (lxadmin) to Ubuntu (webmin/virtualmin), and I already had my Nameservers on my register (Godaddy) to go to [URL] and [URL] along with my IP. (I set the ttl to 60 cuz I thought that might be a problem) Now, I do a dig [URL], it gives me this output.
Code:
; <<>> DiG 9.6.1-P2 <<>> thedomz.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40276
[code]...
I can go to my website only when I change my hosts file (on my windows machine).
View 9 Replies
View Related
Jun 26, 2010
I'm having trouble getting dhcpd to update DNS records in bind9. I'm not seeing any journal files created for bind9. The following appears in syslog when a client machine connects to the network:
Code:
Jun 26 04:07:22 ubuntu dhcpd: DHCPDISCOVER from 00:23:df:44:78:83 via eth0
Jun 26 04:07:23 ubuntu dhcpd: DHCPOFFER on 10.0.0.112 to 00:23:df:44:78:83 (Computer1) via
[code]....
View 3 Replies
View Related
Sep 2, 2010
I am using samba4 and bind9 (9.7.2rc1) on an ubuntu server 10.04.
Everything works fine, but bind9 ist unable to update DNS entries sent by clients.
I followed the tutorial [URL] but it doesn't work for me.
It doesn't look like a file permission problem:
Code:
-rw-r--r-- 1 root root /usr/local/samba/private/dns.keytab
-rw-r--r-- 1 root root /usr/local/samba/private/dns_update_list
-rw-r--r-- 1 root root /usr/local/samba/private/named.conf
-rw-r--r-- 1 root root /usr/local/samba/private/named.conf.update
[Code].....
View 2 Replies
View Related
Aug 11, 2010
I am trying to get bind 9 up and running on a new installation of server 10.04 and keep getting errors when starting the daemon -
* /etc/bind/named.conf.local:19: unknown option 'zone'
* /etc/bind/named.conf.local:20: unknown option 'zone'
* /etc/bind/named.conf.default-zones:3: unknown option 'zone'
* /etc/bind/named.conf.default-zones:11: unknown option 'zone'
* /etc/bind/named.conf.default-zones:16: unknown option 'zone'
* /etc/bind/named.conf.default-zones:21: unknown option 'zone'
* /etc/bind/named.conf.default-zones:26: unknown option 'zone'
The onlything I could find after scrubbing the internet is once ina while there's a missing bracket. But I have checked and triple checked my config files and the syntax and can't find anything wrong. I have another installation of bind9 running on Fedora and the same exact syntax works just fine.
[Code]....
View 2 Replies
View Related
Sep 8, 2010
Im using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
[Code]...
View 3 Replies
View Related
Oct 29, 2010
After upgrading from 9.10 to 10.04, a hundred or so of (for example)
Code:
error (network unreachable) resolving '14.42.117.203.in-addr.arpa/PTR/IN': 2001:500:13::c7d4:35#53: 1 Time(s)
messages appear in syslog each day. Each URL has from 2 - 6 attempts at various ipv6 addresses. My question is why is bind9 trying to resolve ipv6 addresses? I have done nothing to enable or disable ipv6 and thought that if not explicitly enabled I would not have to be concerned with it.
View 1 Replies
View Related
Dec 25, 2010
I am having trouble with setting up BIND9 for 6 virtual servers that use ubuntu x64 v10.10. I have main server running ubuntu as well. host name is xeonserver I would like to explain my setup first.
my router ip: 192.168.1.1/24 host server for VMs ip: 192.168.1.2/24 Then on qemu my virtual machines are in 10.0.0.0/24 network, gateway to my router is 10.0.0.1
1. kerberos.xeonserver (not configured yet) 10.0.0.2
2. dns.xeonserver (the one I have trouble with) 10.0.0.3
3. mysql.xeonserver (not configured yet) 10.0.0.4
4. apache.xeonserver (not configured yet) 10.0.0.5
5. ftp.xeonserver (not configured yet) 10.0.0.6
6. mail.xeonserver (not configured yet) 10.0.0.7
To configure it I followed instructions found on [URL]
[Code]...
View 1 Replies
View Related
Jun 11, 2011
I have installed bind9 for DNS. I have also installed Apache2, PHP5, MySQL, and correctly configured these together. When I view domain1.co.uk it currently works fine as required. I would like to change it to:
* /var/www/domain1.co.uk/prod/ - becomes the root dir of domain1.co.uk
* /var/www/domain2.co.uk/prod/ - becomes the root dir of domain2.co.uk
Nevertheless, I have created a the following files; these are copies of the "default" file and correctly amended. the required destination directories are in place!
* /etc/apache2/sites-available/domain1.co.uk
* /etc/apache2/sites-available/domain2.co.uk
I then executed:
Code:
sudo ln -s domain1.co.uk ../sites-enabled/domain1.co.uk
Code:
sudo ln -s domain2.co.uk ../sites-enabled/domain2.co.uk
It is important to understand domain1.co.uk and domain2.co.uk represent 2 Existing domain names I own, and both point to my server.
domain1.co.uk currently works in /var/www
Why I would like multiple domain names on the server.
View 1 Replies
View Related
Dec 3, 2008
I have setup ubuntu server and right now i'm trying to get my DNS server working for my intranet.
I'm using my ubuntu as gateway wo internet and somehow my windows client can't use my DNS service.
when i do nslookup www.google.com from my server (10.0.0.1) it return me answer code...
View 1 Replies
View Related
Apr 1, 2011
I'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.
dig -x @8.8.8.8 130.240.133.81
gives me:
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 2917
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:
Code:
acl internals {
127.0.0.0/8;[code]..........
I don't know whether the views has messed something up. It worked before I added the views.
View 3 Replies
View Related
Jan 12, 2011
Removed the thread; figured out that this does work in the zones config:
<Record you want redirected to another nameserver><tab>IN<tab>NS<tab><name server to redirect the query to>
View 1 Replies
View Related
Feb 26, 2010
I have two servers on my network One with ubuntu 9.10 server And one with openSUSE 11.2.The ubuntu server is my webserver and runs phpsysinfo and my website. On the openSuse server i have a webbased application and some files that i want people to be able to reach by using mydomain.com wich points to my ubuntu server. Is there any way to do this?
View 1 Replies
View Related
Apr 28, 2010
I've been having a hard time googling and trying to get ALL network connection to be redirected to squid proxy. I couldn't find a proper configuration for ufw or iptables. The ideas are:
1. redirection rule should NOT depend on a specific network inteface, but should work with any connection type, ex.: ppp0 or eth0... 2. firewall rules can be for firehol, iptables, or ufw (the same as iptables, just tell me where to place them). Preferably ufw or gufw. 3. should not interfere on cups web interface and lighttpd server.
BTW: it's not a ubuntu server install
View 6 Replies
View Related
May 10, 2010
Here's what I'm trying to do to complete my rocking development server.
I would like all outgoing email on my Ubuntu server to be redirected to one email address (internal or external). I don't have any mail server installed yet (I'll probably use postfix unless you have another suggestion).
The reason I would like this to work is because I'm a web developer working on multiple projects. When I start working on a new project I would like to be able to test some of the forms and features in the web application (PHP) without having emails sent to the email address configured in the application. I can always change configurations but having my development server forward the emails would save me lots of trouble.
Example:
If one of my php application sends an email to: user1@domain.com, user3@domain4.com... I would like all of them to forward to myemail@domain.com
View 3 Replies
View Related
Sep 30, 2010
I got two web apps in my single linux box, they are Wiki and Mantis the screenshot of the web apps directory shown below.I have created the DNS CNAME record for this server which point to the main server SV6.somehow i got error after i edit it and restart the Apache server.
View 2 Replies
View Related
Oct 26, 2010
I'm hosting my own dedicated server with Ubuntu Server 10.10. I have it set up with a static local IP, and I've configured DynDNS to link up with my router and allow my server to go live to the internet. I have all the appropriate ports unlocked, with the exception of port 80. This port is blocked by my ISP (Charter) and I can't use it. Due to this, I configured my router to listen on port 81, and direct it to my server.
So, In order to view it, you need to go to the IP XXX.xxx.XXX.xxx:81 Today, I registered (www.online-self.com) in hopes of getting around my current mask (provided by DynDNS.com (omegame.selfip.com). So here is my dilemma, When I go to the host of my domain name , I want to redirect my DNS to my server IP.
I can't seem to do it though? They want a strict IP address, no port extensions. How do I get around this so that my domain name and IP address link up? I'm thinking I may be missing a step, or maybe I needed to register a domain name that simply redirects? I'm starting to get confused on what I should do next. Can I even do this?
View 6 Replies
View Related
Jun 19, 2011
Our company owns multiple tld's for our corporate domain (e.g. company.com, company.net, etc.). Currently, we operate the main website at [URL]. To have "company.net" et al forward/redirect to "company.com", should we use a 301 redirect or setup a ServerAlias in Apache's virtual host directive (we use name-based virtual hosting on Ubuntu Server). Are there any SEO penalties from one approach vs. the other (e.g. Google thinking you have multiple sites with the same contact + flagging it as spam)?
View 2 Replies
View Related
May 4, 2010
I have configured my Cisco firewall to redirect all its logs to my Ubuntu 9.1 server (no UI.)
Now, my /var/log/messages is getting all the firewall logs + all other logs.
I'm wondering if there is a way to redirect the logs from my Cisco Firewall (coming from UDP port 514) to another file.
View 2 Replies
View Related
Aug 10, 2010
How can I redirect my URL after a site move.I have phpBB forum software installed on a 10.04 server, and I recently moved the forums from mysite.com/forums/ to mysite.com/.
So, a thread that looked like
mysite.com/forums/viewtopic=...
now looks like
[code]...
View 2 Replies
View Related
May 14, 2010
On my Server I have an application running. I have the External IP address of the Server registered in DNS so users requiring access from outside the office can enter a full URL rather then an IP address.
How to I change my Apache config so that all traffic that comes into the server from the URL is put over https?
View 6 Replies
View Related
Jun 4, 2010
My goal is a testing server with an apache virtual host for each site that I'm working on, with fairly painless setup for each new job.For example, I want http://site-a.mydomain to server this document root /home/client-a/site-a/public_html (or something to that effect)Ideally, DNS will use a wildcard to point http://anything-i-type.mydomain to the testing server, and apache will have a dynamic virtual host definition that will do a little magic so that I won't have to mess with DNS records or add a new virtual host each time I add a new site for a client. I'll worry about that when I get there, just put that out there in case anyone has any tips! for now I just have one little problem that's hurting my mood-
It looks like I've got my DNS server working just fine, so yay there- BUT my first attempt at adding a virtual host isn't working quite how I expected- meaning that site-a.mydomain now serves up the correct document root, but when you put http://site-a.mydomain into the browser's address bar, the address bar is then updated to http://10.0.1.100/site-a/public_html - bogus!! I must be missing an option like "FunnyBusiness Off" -
root@ubuntuvm:/etc/apache2/sites-available# vim client-a.mydomain
<VirtualHost *:80>
UseCanonicalName Off
ServerName site-a.mydomain
DocumentRoot /home/client-a/site-a/public_html
</VirtualHost>2
View 2 Replies
View Related
