Im install bind9 in ubentu 10 with this turotial [url]my dns server is work in linux but my client user cannot use dns when client run nslookup in cmd Cannot find server name for address my_ip_linux :server faild Server: Unknown. im on linux valid ip
when i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
using Ubuntu Server 10.10 x86_64 on this machine. It is used as a master DNS server for my domain. We have migrated it to Ubuntu from Gentoo. The problem is that AppArmor is spamming /var/log/syslog
Code: Jan 3 14:38:40 hydra kernel: [2154828.893409] type=1400 audit(1294061920.141:660146): apparmor="DENIED" operation="mknod" parent=1 profile="/usr/sbin/named" name="/var/log/named_querylog" pid=15397 comm="named" requested_mask="c" denied_mask="c" fsuid=103 ouid=103 The zone files reside in /etc/bind/ and we have not changed anything in /etc/apparmor.d/usr.sbin.named .
We don't want to just uninstall apparmor, but how do we adjust its settings correctly?
Since I have not gotten anything on the "General Help" I am posting this here: When a Ubuntu 10.10 I have starts up apache2, MySQL and postfix start properly but bind9 doesn't. Once booted is I run 'sudo /etc/init.d/bind9 start' it starts. The only thing odd on this system is I have a "inet6 v4tunnel" interface defined in my /etc/network/interfaces. From booting in the syslog there is:
Even with the bind debug level at set at 90 I do not get any more in the logs that what I posted before. The lack of errors in the logs is giving me no idea where to start. I commented out the IPv6 tunnel interface and rebooted and still no help. bind still is not starting at boot. OK, it is not a permissions issue, I have changed the config and zone files to be owned by bind:bind, root:bind, root:root and bind:root and it has made no difference. Doing a fresh install on a Virtual Box VM and configure it in a similar manner bind9 starts normally. (I am almost to the point where I will rebuild the box)
And I have a very long debuging log file I will not post unless requested. I also have added a ufw allow from all to all rule for testing purposes only.
I am migrating my server from Kloxo (lxadmin) to Ubuntu (webmin/virtualmin), and I already had my Nameservers on my register (Godaddy) to go to [URL] and [URL] along with my IP. (I set the ttl to 60 cuz I thought that might be a problem) Now, I do a dig [URL], it gives me this output.
I'm having trouble getting dhcpd to update DNS records in bind9. I'm not seeing any journal files created for bind9. The following appears in syslog when a client machine connects to the network:
Code: Jun 26 04:07:22 ubuntu dhcpd: DHCPDISCOVER from 00:23:df:44:78:83 via eth0 Jun 26 04:07:23 ubuntu dhcpd: DHCPOFFER on 10.0.0.112 to 00:23:df:44:78:83 (Computer1) via
I operate a home network with Ubuntu Server 10.04 with services including DHCP3, Bind9, Apache, and so on. Since I host several dozen websites from home, I have to run Bind DNS. All Ubuntu boxes on my network operate fine. However, all Windows boxes on the network seem to forget to look internally for DNS after a couple of page loads on my internal sites. The network settings still indicate that my internal domain name server is the first lookup and everything seems normal.
The onlything I could find after scrubbing the internet is once ina while there's a missing bracket. But I have checked and triple checked my config files and the syntax and can't find anything wrong. I have another installation of bind9 running on Fedora and the same exact syntax works just fine.
Im using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
messages appear in syslog each day. Each URL has from 2 - 6 attempts at various ipv6 addresses. My question is why is bind9 trying to resolve ipv6 addresses? I have done nothing to enable or disable ipv6 and thought that if not explicitly enabled I would not have to be concerned with it.
I am having trouble with setting up BIND9 for 6 virtual servers that use ubuntu x64 v10.10. I have main server running ubuntu as well. host name is xeonserver I would like to explain my setup first.
my router ip: 192.168.1.1/24 host server for VMs ip: 192.168.1.2/24 Then on qemu my virtual machines are in 10.0.0.0/24 network, gateway to my router is 10.0.0.1
1. kerberos.xeonserver (not configured yet) 10.0.0.2 2. dns.xeonserver (the one I have trouble with) 10.0.0.3 3. mysql.xeonserver (not configured yet) 10.0.0.4 4. apache.xeonserver (not configured yet) 10.0.0.5 5. ftp.xeonserver (not configured yet) 10.0.0.6 6. mail.xeonserver (not configured yet) 10.0.0.7
To configure it I followed instructions found on [URL]
I have installed bind9 for DNS. I have also installed Apache2, PHP5, MySQL, and correctly configured these together. When I view domain1.co.uk it currently works fine as required. I would like to change it to: * /var/www/domain1.co.uk/prod/ - becomes the root dir of domain1.co.uk * /var/www/domain2.co.uk/prod/ - becomes the root dir of domain2.co.uk
Nevertheless, I have created a the following files; these are copies of the "default" file and correctly amended. the required destination directories are in place! * /etc/apache2/sites-available/domain1.co.uk * /etc/apache2/sites-available/domain2.co.uk
I then executed: Code: sudo ln -s domain1.co.uk ../sites-enabled/domain1.co.uk Code: sudo ln -s domain2.co.uk ../sites-enabled/domain2.co.uk
It is important to understand domain1.co.uk and domain2.co.uk represent 2 Existing domain names I own, and both point to my server. domain1.co.uk currently works in /var/www Why I would like multiple domain names on the server.
I installed ubuntu 10.04 server in VBox. I forgot to check Samba during installation so I installed it later with apt-get. When it was finished, Samba 4 was installed. I did apt-get remove and tried to install samba 3 and can't figure out how to do it. It wants to install Samba4 again. I tried "apt-get install samba3" but no joy.
I'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.
I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:
I am moving from Fedora on this particular computer and I was wondering if I install something like VLC media player, will the Auto Software update look for new releases it they come out?
In Fedora yum and the software updater will look for updates on packages that are installed from other repositories and just wondering if Ubuntu has the same function.
I'm remote from my system and so have to wait 2-3 days before I can get access directly, but I've noticed that when the kernel updates automatically (or forced by me), the next reboot stops at the grub page awaiting confirmation of the kernel I want to boot. grub.conf doesnt seem significantly different from that of fedora (my previos distro for this machine) and even has the default lines and times spec'd, so I can't see what's holding it up. Any ideas how I can prevent this so I can have my system auto-updating the kernel AND safe to reboot remotely?
Nearly every time that automatic updates finishes installing the software and requires a restart of the OS, the PC locks up at the 'Ubuntu' screen with some dots beneath it.
I have been just been forcing it down by powering off/on the PC - which I figure is probably not a safe thing to do but don't know what else to do or how to troubleshoot this problem.
I've looked at some of the log files but can't make any sense of most of them nor do I know which log file might show the problem.
I'm currently administering an Ubuntu box remotely. It's set to install security updates automatically, and it notifies me when I log in via ssh whether it has installed an update which requires a reboot. For example, if it installed a kernel update a few days ago, the update manager will touch a "reboot_required" file in /var/run, and when I ssh into the machine today I'll be greeted with a "System restart required" message. Is there a similar functionality for yum or Packagekit?
I recently had my AE 1000 linksys wireless adapter driver installed, the info for which can be found here:
[URL]
But today I was presented with 142 automatic updates already downloaded waiting to be installed on my computer. I installed the updates and restarted my computer for the updates to take effect. Well, since then my wireless adapter no longer registers at all, it doesn't even recognize my router let alone connect to it. It is as inoperable as the day I got it.
I am currently using a different computer in the house to get internet. Should I go about following the same directions I did before and reinstall the driver, or is there a more simple way?
I'm using an old computer with Lenny for a few weeks. After updating OpenOffice last night from backports to 3.2 and doing an update this morning, there is a long list of packages and libraries in the auto removable section of Synaptic that I suspect or am absolutelt certain that I don't want to remove (Rhytmbox, for example).
On one PC i get automatic updates allmost every day and on the other PC i haven't gotten an auto-update since the install. apt-get update runs ok. I have seen from other posts here, that stable distros are supposed to get only security updates. Why, tho, does one PC get auto-updates, the other not? Is there some switch to enable auto-updates?
I've been using Ubuntu 10.10 (Maverick) for some time now as the OS for a home Nasbox, along with webmin. Its been great, and I've been able to SSH into the box without any issues in the past.Last night, I ran apt-get update and apt-get upgrade to bring my system more current.
Now, I can't seem to log into SSH any longer, and get a "Connection failed, Windows error 10061" error.I'm going to upgrade the OS to 11 as well in hopes things fix themselves.
I just changed the os on my media server from Windows Home Server to Unbuntu 10.4 server. I got most of it working (samba, twonkymedia)
The only thing i have left to get working is the backup of that server. I installed bacula as i beleive it will do the job (unless someone has a better and simpler to configure idea) and i would like it to backup to my external usb 1Tb hard drive. I am able to mount the drive manually but this server gets turn on and off often to save power (and cut the electric bill) when not in use. I tried adding a line to fstab but when a do that, the server gets stuck on the startup even with the drive turned on. I read somewhere that i should use the UUID of the drive as it could change from sbd1 to sbh1 on restart so i did, same result.
Ive been trying to figure out a method to upload (copy) all files and sub folders under that folder to my content delivery network, basically run it every 30 minutes.
Whats the best way to do it? I tested a few that I was reading about, one just copied files nd not sub folders, another moved all files.
i have just installed the 10.04 LTS server on my system.I set up a file server for my windows computers and can connect to the server. However, I was going to update and install a couple of packages, but My system cannot find the update or download server for itIs anyone else experiencing this problem. If not, any ideas on how to fix it.
Heres my situation. I have around 30+ systems running Karmic and more coming online everyday. I'd like to be able to have these updated via the local network to conserve net bandwidth. Is it possible to setup a single system which will download updates I specify, then make them available to the other systems on my network via some kind of local repo?
Of course I'm not looking to download EVERY repo, just the essential updates to the core OS. I really just want to eliminate that 45 min/256 file download that takes place each time I install a new system.