I want to make BIND9 aware of my TLD so I need to give it an A record. Then I wanted to create CNAME for ftp, mail and so on as time permits
I have webmin so I need to work from that.
my TLD is [URL]
I wanted to bolt on www, ftp for now
www is port 80, ftp port 21 etc
I have server 9.04 and joined thru winbind to Windows Domain and subversion installed.Windows AD users can use their own credentials to join and everything is working fine.However the group svn which is used to access the repos in /etc/groups has some users.However I would like to add the domain users group to the svn group but the domain users contains Space. And /etc/groups does not happend to read the space any ideas on how to add "domain users" to the svn group in /etc/groups
View 1 Replies View RelatedWhen i try to join my Ubuntu server to Microsoft Active Directory domain, i get the error message below.
Kinit failed: Clock skew too great Failed to join domain: Time difference at domain controller I know the reason is because of the time difference between my domain controller and the Ubuntu server. But what i want to know is that possible to join a domain without time synchronisation? Because my domain controller is working for another time zone, for another Country, so i can not synchronise it with my Ubuntu server.
I've tried reading several tutorials on setting up a domain name with bind9, but I've never managed to get one working.
View 7 Replies View RelatedLocation and syntax of named.conf in Ubuntu's version of BIND 9. I already have an HTTP server (in the form of Apache) along with forum software set up on my Acer netbook. However, the only way I can access the forum software is if I type in my IP address. How do I set up my named.conf to get the IP address to redirect to a domain? I already have my resolv.conf configured to allocate a domain to the IP address, but testing the ping of the site returns a "No such domain" error.
View 1 Replies View Relatedi have registered two domain names that i want to use to connect to my ubuntu server. I was wondering how to do this i was looking at bind9 but that didn't work that great. The server is behind a router with firewall i can connect to it using the external IP address but i like to use the two domain names if that is possible.
View 3 Replies View RelatedIm install bind9 in ubentu 10 with this turotial [url]my dns server is work in linux but my client user cannot use dns when client run nslookup in cmd Cannot find server name for address my_ip_linux :server faild Server: Unknown. im on linux valid ip
View 5 Replies View RelatedThe company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
when i started bind9, it showed me this error, Can anyone help me in this, according to me i dont have a file sysklogd so i can not restart that. that is why i think iam getting error while starting bind9. How to get that file and how to get started Bind9.
View 4 Replies View Relatedusing Ubuntu Server 10.10 x86_64 on this machine. It is used as a master DNS server for my domain. We have migrated it to Ubuntu from Gentoo. The problem is that AppArmor is spamming /var/log/syslog
Code:
Jan 3 14:38:40 hydra kernel: [2154828.893409] type=1400 audit(1294061920.141:660146): apparmor="DENIED" operation="mknod" parent=1 profile="/usr/sbin/named" name="/var/log/named_querylog" pid=15397 comm="named" requested_mask="c" denied_mask="c" fsuid=103 ouid=103
The zone files reside in /etc/bind/ and we have not changed anything in /etc/apparmor.d/usr.sbin.named .
We don't want to just uninstall apparmor, but how do we adjust its settings correctly?
Since I have not gotten anything on the "General Help" I am posting this here: When a Ubuntu 10.10 I have starts up apache2, MySQL and postfix start properly but bind9 doesn't. Once booted is I run 'sudo /etc/init.d/bind9 start' it starts. The only thing odd on this system is I have a "inet6 v4tunnel" interface defined in my /etc/network/interfaces. From booting in the syslog there is:
Code:
/var/log/syslog:Feb 28 19:02:42 ubuntu named[1029]: starting BIND 9.7.1-P2 -u bind -d 9
/var/log/syslog:Feb 28 19:02:42 ubuntu named[1029]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind'
[code]....
Even with the bind debug level at set at 90 I do not get any more in the logs that what I posted before. The lack of errors in the logs is giving me no idea where to start. I commented out the IPv6 tunnel interface and rebooted and still no help. bind still is not starting at boot. OK, it is not a permissions issue, I have changed the config and zone files to be owned by bind:bind, root:bind, root:root and bind:root and it has made no difference. Doing a fresh install on a Virtual Box VM and configure it in a similar manner bind9 starts normally. (I am almost to the point where I will rebuild the box)
I have googled for hours and can not find an answer to what this means.
dig @172.16.255.254 twitter.com.
; <<>> DiG 9.7.0-P1 <<>> @172.16.255.254 twitter.com.
; (1 server found)
;; global options: +cmd
;; Got answer:
[Code]...
And I have a very long debuging log file I will not post unless requested. I also have added a ufw allow from all to all rule for testing purposes only.
I am migrating my server from Kloxo (lxadmin) to Ubuntu (webmin/virtualmin), and I already had my Nameservers on my register (Godaddy) to go to [URL] and [URL] along with my IP. (I set the ttl to 60 cuz I thought that might be a problem) Now, I do a dig [URL], it gives me this output.
Code:
; <<>> DiG 9.6.1-P2 <<>> thedomz.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40276
[code]...
I can go to my website only when I change my hosts file (on my windows machine).
I'm having trouble getting dhcpd to update DNS records in bind9. I'm not seeing any journal files created for bind9. The following appears in syslog when a client machine connects to the network:
Code:
Jun 26 04:07:22 ubuntu dhcpd: DHCPDISCOVER from 00:23:df:44:78:83 via eth0
Jun 26 04:07:23 ubuntu dhcpd: DHCPOFFER on 10.0.0.112 to 00:23:df:44:78:83 (Computer1) via
[code]....
I operate a home network with Ubuntu Server 10.04 with services including DHCP3, Bind9, Apache, and so on. Since I host several dozen websites from home, I have to run Bind DNS. All Ubuntu boxes on my network operate fine. However, all Windows boxes on the network seem to forget to look internally for DNS after a couple of page loads on my internal sites. The network settings still indicate that my internal domain name server is the first lookup and everything seems normal.
View 2 Replies View RelatedI am using samba4 and bind9 (9.7.2rc1) on an ubuntu server 10.04.
Everything works fine, but bind9 ist unable to update DNS entries sent by clients.
I followed the tutorial [URL] but it doesn't work for me.
It doesn't look like a file permission problem:
Code:
-rw-r--r-- 1 root root /usr/local/samba/private/dns.keytab
-rw-r--r-- 1 root root /usr/local/samba/private/dns_update_list
-rw-r--r-- 1 root root /usr/local/samba/private/named.conf
-rw-r--r-- 1 root root /usr/local/samba/private/named.conf.update
[Code].....
I am trying to get bind 9 up and running on a new installation of server 10.04 and keep getting errors when starting the daemon -
* /etc/bind/named.conf.local:19: unknown option 'zone'
* /etc/bind/named.conf.local:20: unknown option 'zone'
* /etc/bind/named.conf.default-zones:3: unknown option 'zone'
* /etc/bind/named.conf.default-zones:11: unknown option 'zone'
* /etc/bind/named.conf.default-zones:16: unknown option 'zone'
* /etc/bind/named.conf.default-zones:21: unknown option 'zone'
* /etc/bind/named.conf.default-zones:26: unknown option 'zone'
The onlything I could find after scrubbing the internet is once ina while there's a missing bracket. But I have checked and triple checked my config files and the syntax and can't find anything wrong. I have another installation of bind9 running on Fedora and the same exact syntax works just fine.
[Code]....
Im using bind9 as DNS server on my LAN, but it does not seem to translate its own hostname correctly for some reason. Other hosts is translated correctly, the problem only seems to apply to the DNS host itself. if i "ping <server_hostname>" from the server, it translates correctly. But if i "ping <server_hostname>" from the client it only says "unknown host" The client has the correct DNS-server assigned. How can i start troubleshooting this?
[Code]...
After upgrading from 9.10 to 10.04, a hundred or so of (for example)
Code:
error (network unreachable) resolving '14.42.117.203.in-addr.arpa/PTR/IN': 2001:500:13::c7d4:35#53: 1 Time(s)
messages appear in syslog each day. Each URL has from 2 - 6 attempts at various ipv6 addresses. My question is why is bind9 trying to resolve ipv6 addresses? I have done nothing to enable or disable ipv6 and thought that if not explicitly enabled I would not have to be concerned with it.
I am having trouble with setting up BIND9 for 6 virtual servers that use ubuntu x64 v10.10. I have main server running ubuntu as well. host name is xeonserver I would like to explain my setup first.
my router ip: 192.168.1.1/24 host server for VMs ip: 192.168.1.2/24 Then on qemu my virtual machines are in 10.0.0.0/24 network, gateway to my router is 10.0.0.1
1. kerberos.xeonserver (not configured yet) 10.0.0.2
2. dns.xeonserver (the one I have trouble with) 10.0.0.3
3. mysql.xeonserver (not configured yet) 10.0.0.4
4. apache.xeonserver (not configured yet) 10.0.0.5
5. ftp.xeonserver (not configured yet) 10.0.0.6
6. mail.xeonserver (not configured yet) 10.0.0.7
To configure it I followed instructions found on [URL]
[Code]...
I have installed bind9 for DNS. I have also installed Apache2, PHP5, MySQL, and correctly configured these together. When I view domain1.co.uk it currently works fine as required. I would like to change it to:
* /var/www/domain1.co.uk/prod/ - becomes the root dir of domain1.co.uk
* /var/www/domain2.co.uk/prod/ - becomes the root dir of domain2.co.uk
Nevertheless, I have created a the following files; these are copies of the "default" file and correctly amended. the required destination directories are in place!
* /etc/apache2/sites-available/domain1.co.uk
* /etc/apache2/sites-available/domain2.co.uk
I then executed:
Code:
sudo ln -s domain1.co.uk ../sites-enabled/domain1.co.uk
Code:
sudo ln -s domain2.co.uk ../sites-enabled/domain2.co.uk
It is important to understand domain1.co.uk and domain2.co.uk represent 2 Existing domain names I own, and both point to my server.
domain1.co.uk currently works in /var/www
Why I would like multiple domain names on the server.
If i want to add new MX in my domain name then what to do in new mx server. Suppose my existing mail server is test.com whose mx record is below
test.com. 14400 IN MX 0 mail.test.com.
test.com. 14400 IN MX 5 mx-01.test23.net.
So, what need to change in test23.net server.
we have installed the Centos on my server and configured the postfix with our domain [URL] as example. If I send any email through squirrel email, Emails are going from [URL] instead of [URL].
View 8 Replies View RelatedI'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.
dig -x @8.8.8.8 130.240.133.81
gives me:
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 2917
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:
Code:
acl internals {
127.0.0.0/8;[code]..........
I don't know whether the views has messed something up. It worked before I added the views.
I am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
I'm setting up a PDC Samba server on centos5.4. All tasks are well done but on adding new machine in my domain I have a this error message: Error occurred when attempt to join your machine in domain "invalid user name".
samba.log
Code:
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] auth/auth.c:check_ntlm_password(309)
check_ntlm_password: authentication for user [root] -> [root] -> [root] succeeded
[2010/07/05 12:34:55, 2] rpc_server/srv_samr_nt.c:_samr_lookup_domain(2919)
Returning domain sid for domain RAPHAELLO -> S-1-5-21-3852106609-489253481-401883016
smb.conf .....
I think that the machine account is missed or miss matched.
Ubuntu Server 9.10I want to set up my dhcp server to also be my DNS server so do I skip these lines or point them at the same server that the config file is on?
View 4 Replies View RelatedIn the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies View RelatedI have a SUSE 10 SP 2 server that needs to get added to a Windows Active Directory domain and registered in DNS. Samba is 3.0.28-0.5. I tried to join the domain with the following command:
[Code]...
i need to configure Redhat Linux as Domain Controller in my organisation, whee all of my clients PC's will be Windows XP or Windows 7 ( where i can login through Domain users ). what exactly i need to configure in Redhat Linux, i heard Configuring Samba as PDC is quite enough ? is that right ? then what is Open LDAP ? should i need to Configure Open LDAP also ?
View 2 Replies View Related