I'm running a server and Cogeco doesn't want that.
What I want to do is make it so when someone goes to my_domain/ apache will pretend it doesn't exist, but I want subdirectories to work still.
What I tried was denying access to /var/www, but the apache returns with a message for that.
I have it set up so when I go to URL... it shows my server. I'm not sure how I can make it viewable to everyone though.
View 3 Replies View RelatedI basicly want certian folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working.i have
Code:
Deny from all
AuthType Basic
[code]....
Recently I've been migrating my development environment to ubuntu (desktop edition, because this is not a server, is just my computer) and I've been having some problems with apache case-sensitive (I'm an absolute beginner with it). I want to make apache case-insensitive, but I didn't find a complete and easy to follow solution online more than doing this:
From the command line, type sudo su to get root privileges.
nano /etc/apache2/mods-available/speling.conf
Type CheckSpelling on and hit ctrl-x, y to exit and save the file.
type a2enmod and then speling and hit enter.
type /etc/init.d/apache2 reload to reload apache.
Mistype a url to test it.
I found that here: [URL]. It worked for some things but I'm still having a lot of problems with capitalization. I don't wanna go back to windows an ISS. BTW I'm using ubuntu 10.10 desktop edition 32-bits, and I've not moved any apache configuration more than that described above.
Is there a quick and easy way to make sure apache always starts with a certain nice value?
View 1 Replies View RelatedI've tried to copy my files from Xamp httdocs in windows to /var/www/html,
but I can't paste the file, what should I do so I can paste the files ?
I have logged in as a root..
I am trying to make my Apache server show symbolic links in a directory listing, but have so far been unsuccessful. In my latest attempt, I have placed the following code in .htaccess, in the directory with the symlinks that I want listing:
Code:
<Directory />
Options All
</Directory>
Im httpd-vhosts.conf, I have also placed the following code within the relative <VirtualHost></VirtualHost>:
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
I'm trying to find a command to tell nslookup, "I want you to try to resolve hostname X using DNS server Y, and if the lookup fails, just output failure do NOT fail over to some other DNS server as a backup and use it to try to resolve the same hostname."I'm trying to follow the man page instructions for doing this, but it doesn't seem to work. The man page for nslookup on my system (CentOS 5.5) includes the line:
"[no]fail Try the next nameserver if a nameserver responds with SERVFAIL or a referral (nofail) or terminate query (fail) on such a response."But if I try using that option, the output seems to indicate that after the lookup failed on ns1.afraid.org, nslookup failed over to 208.67.220.220 (the first nameserver listed in my resolv.conf -- an OpenDNS nameserver) and used it to resolve the hostname instead.
I've been searching around for a way to add a value to an attribute of the /etc/vsftpd.conf by script.
Such as:
Code:
/etc/vsftpd.conf
local_root= /scripts/userpath.sh $USER
//Artheus
I have to configure the varnish cache for the varnish 2.1 from the already configured varnish.conf(version 2.07)
When i run the new varnish file which resolves the error
Message from vcc compiler ""Expected return Action name.(Input line 120 pos 12) return discard ""
May i clear about switching the configuration from varnish 2.1 to varnish 2.07?
I have a set of bash scripts that I'm running that automatically build a set of packages for me and redirect their output into logs. Basically, I have a bunch of lines that are something like this: ${CONFIGURE_DIR}/configure &> ${LOG_DIR}/log or cd ${CONFIGURE_DIR} && make &> ${LOG_DIR}/log, etc.
This is supposed to make the entire process silent. However, sometimes with some packages some output leaks to my console (either stdout or stderr). I'm thinking that maybe the configure scripts/make are executing commands within new shell instances that don't inherit my redirect, or something to that effect.
Another reason for thinking this is that in another part of my script I detect errors when running make by testing with "if [ $? -ne 0 ]", and if the redirect leaks to my console and also the leaked output indicates that the build failed ("make: Error" and so on), then my $? test fails (i.e., it thinks that $? == 0, whereas a failed make should return a non-zero value). It's as if my original script can't "see" the results from child commands executed from later scripts.
I have Webmin installed on an Ubuntu server. I currently have a successful apache server running on port 80, however I want to create a virtual host on port 81. When I try I go to servers->Apache Webserver-> Create Virtual Host I change the port to 81 and the document root to /var/port81www then I click create. How ever when I goto 192.168.1.5:81 (local ip, I know I have to port forward but its not even working local) it does not work.
View 5 Replies View RelatedFirst off please don't say "go read the man page". I need instructions for newbies
I basically want certain folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working. Someone kind enough to help out a confused person like myself?
I installed the citadel suite on ubuntu server 9.10 Email obviously works fine internally. I tried to setup a smart host to send my mail through as my isp(Verizon) obviously blocks port 25. I tried to send out the Verizon smtp server on port 587. In the Administration> Domain names and Internet mail configuration>Smarthosts.My smarthost entry on the citadel configureation page above was usernameassword@outgoing.verizon.net:587 but after sending an outgoing email, it comes back with a "invalid/host-not-in-DNS return address not allowed"
I have also tried using gmail and a hotmail account with the respective smtp address's in but they come back with "Must issue a STARTTLS command first".I have researched both messages and come up with squat that has helped me.
I know that my mail will have to go out through a smarthost of somekind. So is am I on the right track with choosing verizon/gmail/or something else as my smtp relay, or is there a free service out there that I can send email through(haven't found one if there is)
Anyone else ever setup Citadel and got around their isp blocking port 25?I am also not sold on citadel, it was just the first/ nicest looking one that I found.
I have Joomla installed at /var/www/joomla, if I navigate to http://localhost/joomla, I get a 404 error, but if I add index.php, the page loads. What is wrong?? Also I am not able to navigate to the administration part of Joomla for the same reason, typing in index.php doesn't load it in this case. Yes I have verified that all files are present in the directory.
View 7 Replies View RelatedI am very new to using Linux. I am trying to configure Apache. I have located the default in /etc/httpd and did a yum install httpd. Now, with this done, I am lost as is to how to configure. I am trying to make an ssl website with apache.
View 3 Replies View RelatedI have made out a little software as to talk with my friends through network . there are two parts : one is listening to receive messages ,the other will send messages. but the firewall is bothering .so I want to know if I can make my software listen to port 80 while apache is also running .
View 11 Replies View RelatedI want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?
View 9 Replies View RelatedI'm having a real problem getting Apache to allow a symlink on a particular folder. The symlink is at /var/www/html/images and it points to /home/foo/images.Here is the relevant section to my httpd.confQuote:
<Directory />
Options +FollowSymLinks
AllowOverride None
[code]....
I have moved a site from a caps-insensitve server (OS X, Apache 1.3) to a default CentOS/Apache 2.2 install and run into problems.Actions:1) Made sure that mod_speling.so is loaded: LoadModule speling_module modules/mod_speling.so) Added CheckSpelling directive to Section 2: 'Main Server configuration'CheckSpelling on) Restart httpd
View 7 Replies View RelatedI did a wget on the source and built the apache binaries correctly. Now what do I need to do to get some documents accessible using HTTP (start some services?)? Also, do I need to group all the files I want to make accessible in some directory and make the directory and its contents accessible or can I just make the individual documents available? I will be providing these links to my colleagues and do not want them to be down, so need to make sure that the apache services are up automatically after a reboot. Does apache have some inbuilt support for this?
View 2 Replies View RelatedI have CentOS 5.5 x86_64 with Apache, php and mysql.
I have just installed OTRS (helpdesk - trouble ticket system) on that server and no users.
This system works with perl, apache and mysql.
I notice that is slow to respond and at times unresponsive the apache welcome page. code...
I've run into a problem and I don't know if it's apache or php or the combination of both. I can compile apache 2.2.15 just fine, but whenever I try to compile php 5.3.2 into my server, the first two steps work just fine but when I get to the make install part it shows the libphp5.so and it just stays there and I have to cancel the install because it won't finish.
View 5 Replies View Relatedjust switched our company from windows server to linux and everything is going good except we have 4 vpn connections though out the country coming to our server. All giving the client machines ip addresses of 192.168.x.x based on where they are located 192.168.1.x for the main location 192.168.2.x for a second location etc, and IIS could see the clients ip instead of the wan ip and was setup to block all ips except 192.168.x.x ip's and this worked great.
So i set up apache the same way, to allow only 192.168 ip's but i guess it doesn't work that way in apache for connections coming though vpn? 2 out of our 4 VPN connections are not static IP's, so the 2 that are I just add that ip to the allow list and that worked.But i don't think we should HAVE to get static ips for the other 2, that's one of the benefits of using VPN, especially if our old windows server didnt need it.Is there any way for apache to see the clients ip address for access or is there something somewhere else that needs changed for this?
I've got some strange looking requests in my access_log which I don't much like the look of. Can someone take a look and let me know if 1) it's possible for other people to use my server as a proxy, and 2) how I can stop them.
Code:
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
[Code]...
My Server is 8.04 (hardy) and Apache is 2.2.8. I have been receiving emails from Apache each time a new stable release is available, most of which say you should install them due to security issues. The current stable release of apache being offered is 2.2.17
Q1) Do you recommend I upgrade from Apache 2.2.8 to 2.2.17?
Q2) Does this come automatically with my regular updates via Update Manager once the Ubuntu community thinks its stable enough (it appears that it doesn't)?
Q3) What is the best way to install the update?
Q4) Any concerns about installing it into a live environment? I don't have a development platform to try it in first.
When starting Apache I get this error in 10.10 (not in 9.10): [Fri Dec 03 21:14:22 2010] [error] (2)No such file or directory: could not open transfer log file /etc/apache2/${APACHE_LOG_DIR}/other_vhosts_access.log. Unable to open logs So where do I define APACHE_LOG_DIR ?
View 4 Replies View RelatedI'm looking to run some R scripts on a mysql database (engine =csv) from the apache webserver.
The goal is to record some statistics/numbers while someone is logged in, pass those numbers to r, run some statistics algorithms on the passed set of data and output an image file back to the logged-in user's html web page.
Doing this along with knowledge on how to call general r functions from within a php framework would be great.
I would like to add ROR to my web server, but I would still like to keep php. I tried doing this a few days ago, but it made my PHP unusable so that it would ask me to download a file rather than displaying the php page. how to install ruby on rails without trashing my system again.
View 3 Replies View Related