I'm having a real problem getting Apache to allow a symlink on a particular folder. The symlink is at /var/www/html/images and it points to /home/foo/images.Here is the relevant section to my httpd.confQuote:
<Directory />
Options +FollowSymLinks
AllowOverride None
[code]....
I am running a quad core centos 5.4 box that is having a strange problem with dovecot. The administration panel is able to send emails through dovecot but not any of the user accounts (ie with webmail). I've done a bit of research with what could be wrong but haven't had any luck so far I am also having a weird problem with apache: on a c++/php bittorrent application I was going to be running on a subdomain of my main site I get a 500 error every time I try to log in. The only way to get rid of the 500 error is to clear the chache (so its horribly broken somehow). The error generated in the log whenever I try to log in is that "ffmpeg is already loaded" (which I am running on the main site and is critical). Is there a way of either repairing my apache install or excluding ffmpeg on the subdomain in the conf or something?
View 2 Replies View Relatedthe hard drive on my web server died so I replaced it and installed Fedora 15. I have been installing the OS on a small drive and then mounting other drive(s) for storage and did the same thing here. The problem is that I cannot get Apache to follow symlinks. Apache is partially working, it will serve my index.html page in the web page root directory and I made another directory called webtest and put some files in, and that worked fine. I made a symlink from the root directory to a folder on the mounted drive but when I try to access it, it gives me the old 403 Forbidden error. I also made a similar link in the webtest directory, I can view the other files in that directory but it does not show the link - also, trying to force it by typing the full path in the browser gives the same 403 error.
I have checked the permissions and SELinux types (using ls -Z) and they seem to be fine and I cannot find any .htaccess files. All the files on the mounted drive are owned by www:www but I also tried setting the user and group to www in httpd.conf and it still gave the same issue, so I changed them back to apache. I've been reading posts and sites on this for hours now and I'm still lost. I can post results of log files if they are of any use, I just wasn't sure what to post because it is somewhat working.
I have configured apache on my Centos 5.2 and it is working well. I want to have a sym link of my docs directory in /root/ in the apache root directory. I used ln -s command to create this sym link. But when I tried to access this I get the following error:
You don't have permission to access /docs on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
How can I access this directory in apache. i use apache 2.0.63.
I want to enable Pretty URLs in Concrete5 and Joomla CMSs. So far I have- enabled pretty urls in the CMS- created .htaccess files (as they showed)- changed AllowOverride None to All in /etc/Apache2/httpd.conf <directory>- restarted ApacheBut the pretty urls still don't work, When I click any link on either site it gives me a page not found error. If I use the "non-pretty" URLs, all the links work. So I guess Apache either doesn't read the httpd config file or it doesn't read the .htaccess files or something else. Has anyone got this working? What else did you do?
View 9 Replies View RelatedDoes anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies View RelatedI have it set up so when I go to URL... it shows my server. I'm not sure how I can make it viewable to everyone though.
View 3 Replies View RelatedI have moved a site from a caps-insensitve server (OS X, Apache 1.3) to a default CentOS/Apache 2.2 install and run into problems.Actions:1) Made sure that mod_speling.so is loaded: LoadModule speling_module modules/mod_speling.so) Added CheckSpelling directive to Section 2: 'Main Server configuration'CheckSpelling on) Restart httpd
View 7 Replies View RelatedI have CentOS 5.5 x86_64 with Apache, php and mysql.
I have just installed OTRS (helpdesk - trouble ticket system) on that server and no users.
This system works with perl, apache and mysql.
I notice that is slow to respond and at times unresponsive the apache welcome page. code...
I'm switching internet providers and right now have service with 2. I tried switching my server over today, and ran into trouble so decided to switch it back. I got everything set up again, and it all seems to work - except for ONE of my vhosts. The others work as expected. One (the only "real" site I host) simply hangs. I am "watching" the log file, and the top-level request for "/" (sometimes) comes through and reports response code 200. But, none of the other files (images, css, etc) get requested, and the page never loads.I'm not sure where to even start. Apache is fine since the other vhosts work. I didn't make any changes to my config - except for changing the ip address in my dns. But, that's the same for all vhosts.
It may be worthwhile to note that I changed it back when I tried bringing up the site with the new ISP and it brought up my (new) modem settings with the url. I panicked and couldn't figure out how to fix it.. I thought maybe someone could have been playing with my modem settings (I was automatically logged in as administrator), so I set it back to factory settings. Then I couldn't get the internet to work at all, and changed it back to my original service. Now everything works except for the one vhost.
Server Apache doesn't work.Note the LOG line,you cannot modify or delete "logs/"
View 1 Replies View RelatedI just installed Centos 5.5 on one of my systems today and something is eluding me. Basically I had a web site and forum software (phpBB, but I don't think it's that, other forum software like Xoops does the same thing) running on Fedora 13, and I copied it over to the new Centos installation. Apache is running fine and displays a PHP test file and .html files just fine.
MySQL seems to be fine, I can log into that, show databases etc. Just can't get any forum software to know there is MySQL there. I did change the path of the site, and the databases, and edited /etc/my.cnf and /etc/httpd/conf/httpd.conf to reflect that. Thought I made the needed changes in /etc/php.ini but who knows. Seemed like everything should have tar'd up and moved easy, but not the case...
So I found many methods on google, but no one works. It seems that this one is THE Debian way.
Code:
### BEGIN INIT INFO
# Provides: mystartupscript
#[code]...
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
Whenever I am starting Tomcat5 service in RHEL5 it is showing that it is starting but after some time (after 5 sec.) the status it is showing that lock file found but there is no such process for PID * (where * = different PID no.) and tomcat is not working.
View 2 Replies View RelatedI have been searching in the forum and google but still not lucky enough to figure out yetI have a lighttpd server runningbecause apache consume so much CPU and memory) andqmailtoaster (just setup).Here is the configuration in cgi modules:
Code:
cgi.assign = ( ".pl" => "/usr/bin/perl",
".cgi" => "/usr/bin/perl",
[code]....
I'm trying to make a DHCP server work on my CentOS 5.4 box, but I have placed it on another subnet than the one that it is going to serve. I use a helper address on my router to make the the DHCP requests being routed to the DHCP server on the other subnet.
dhcpd.conf file:
ddns-update-style interim
ignore client-updates
ubnet 10.160.195.160 netmask 255.255.255.224
[code]...
make storageworks tape drive work with redhat 5
View 3 Replies View RelatedAny one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I run a web server on Fedora 12, principally using Apache, MySQL, and PHP. I host a variety of sites, one of which is a family website that contains semi-sensitive personal data for several hundred extended family members, who all have access to the database-driven site.
Until now, I have been using a self-signed SSL certificate to encrypt the data as it is read and written back and forth from my database. Family members have simply had to put up with clicking past certificate warnings as they enter the site, as most browsers flag self-signed certificates as bad. It hasn't really been that much of a bother, but I'd love to do it more professionally. I have looked into buying SSL certificates, but it's a site I host for free and would rather find a cheap or free alternative if possible.
So I'm just fishing for ideas to work with. What are some alternatives to using SSL certificates for moderately strong website encryption? So far, I run only one host on the domain, but may eventually need encryption that would support multiple hosts. Or does anybody know a way to make self-signed certificates work on most popular browsers without being flagged as suspicious?
I am working in a company which use windows ISA server.
I have made firefox to work by setting proxy. However yum command does not work. code...
, after running firefox, program sent me a input dialog to input username and password, then I can surf internet. But yum stil does not work.
The username is 2543355 , and password is xxxxx
My windows hostname is ikc-2543355 , Network Group name is "ikcp.ikc" .
When I login into windows, my username is "2543355" , and login to "ikcp".
I am very new to using Linux. I am trying to configure Apache. I have located the default in /etc/httpd and did a yum install httpd. Now, with this done, I am lost as is to how to configure. I am trying to make an ssl website with apache.
View 3 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
First off please don't say "go read the man page". I need instructions for newbies
I basically want certain folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working. Someone kind enough to help out a confused person like myself?
I'm running a server and Cogeco doesn't want that.
What I want to do is make it so when someone goes to my_domain/ apache will pretend it doesn't exist, but I want subdirectories to work still.
What I tried was denying access to /var/www, but the apache returns with a message for that.
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View Related
