Fedora Servers :: Make A Website With A Virtual Host Of Apache Visible?
Nov 8, 2010
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
I've created a virtual host and when I try to access it it displays the root of the Default Server. Running Fedora 11. This works fine in our Fedora 8, same configuration.
192.168.0.200 Default server is set to Listen 80 virtual server
I am trying to set up an Apache2 virtual host to test sites I make from my own computer.
I used this guide to set up my LAMP and vHost, The LAMP stack seems to be working great, but I run into some problems when I try to set up a vHost
As described in the guide I
1. made a new directory in my home folder /home/[myname]/www/test.dev to put my site in (it currently contains a simple index.html file as a test).
2. In /etc/apache2/sites-available I copied the file "default" and renamed it "test.dev"
3. I edited the content of "test.dev" to look like this:
Code:
4. I enabled the site using the command "sudo a2ensite test.dev". I then restarted apache "sudo /etc/init.d/apache2 reload".
5. I edited the hosts file: "sudo gedit /etc/hosts" to look like this:
Code:
6. I restarted apache "sudo /etc/init.d/apache2 reload".
Now if I enter "http://test.dev" in my firefox's adress bar I just get the apache2 "It works!" site. What is going wrong to cause firefox to show the "It works!" page rather then my own test site?
I've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2 Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev Modified "dev" config DocumentRoot and Document to point to /var/www/dev Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?) Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
I'm not sure is this is possible or not, but what I would like to do is take my public address mydomain.com and configure a virtual host something.mydomain.com only instead of having the content on the same server I would like it to point to the IP of my virtual machine that is in my private network and display that page publicly. Does anyone know if this is possible, or how to do it? I have done this with port forwards, but would like them both to be on the same port.
I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.
Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.
I was able to install and setup Apache on my mint box. I created the site and it was visible to me using the localhost and home address. My instructor tried to view it from his machine and it timed out. I tried to view it from an unused Windows box in the classroom and it was unreachable.The instructor could not figure out why this was happening. The class is using about 4 different distros. There are only 2 of us using Mint and the other guy was not in class. We usually help each other outMost of the class had no problem when the instructor went to view their pages. Some had firewalls issues that were easily remedied. He was stumped when it came to my issue.So what may be going on here? Are there some specific things that need to be done with Apache on a Mint distro that I'm missing? Ubuntu, Opensuse, and Fedora all almost worked without tinkering around
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
how i can start to host my own personal website on my own server that i just created.I was wondering if there were tips you can give me or a site you can recommend me to where i can get lessons on how to host my own site on my own server using fedora 10.
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?
I am using FC9. Can anyone tell me how to host all the manpages on a Apache Server so that a user can access it using the webbrowser like firefox. After googling I came across something called man2html but it really did not work.
Where would I go to find a guide on a how-to for Linux website administration? I want to learn how to create a simple site dedicated to my blog. I already have a blog hosted by wordpress. I want to learn how to administrate my own blog using Apache hosted by GoDaddy.com or some other host.
I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
I have 4 domains registered through godaddy. I have a dell poweredge box with one static IP hosted somewhere. I want the 4 domain to resolve to four different sites. I have already created 4 different sites in apache with four different aliases and has enabled it.
eg alias /a /var/www/a alias /b /var/www/b alias /c /var/www/c
I tried with godaddys forward with masking option. It works but I can't hide xx.xx.xx.xx/a in the links. Whats the best approach? One limitation is I cannot use the webhosts name servers. How do I set this up with name based virtual hosting? Do I setup a DNS server in the box?
I do have a dns host name for my box which is publicy accessible. Some my.ca.examplehost.net
I'm using Apache 2.2 to host multiple subdomains using a single SSL certificate (a wildcard certificate e.g. *.mydomain.com) and, yes, it works! Everything seems to be served correctly and the browsers are pretty happy.
And you can also have the non-SSL sites (virtual hosts on port 80) on the same IP. (That's covered elsewhere)
For those that want similar functionality here's my discovery...
My configuration is like this:
ssl.conf:
Code:
I would have to say that I don't believe that this will work if you are not using a wildcard SSL certificate and having anything other than subdomains under that wildcard.
It is somewhat limited in scenario where this is useful, but for a set of company websites that should be under SSL, this can be tremedously useful when you have a single IP.
I'm running XAMPP 1.7.2 on Ubuntu 8.10 (Linux dt19.im.local 2.6.27-14-generic #1 SMP Tue Aug 18 16:25:45 UTC 2009 i686 GNU/Linux) and am using the PHP 5.3.0 Apache module as standard. For one virtual host I'd like to use PHP 5.2.X as it is part of a project which has a lot of legacy code which is not compatible with PHP 5.3.0. The virtual host configuration block and the applicable directory directive are as follows -
Code:
Checking phpinfo() output on the above virtual host (or using the default virtual host directive and accessing it via http://localhost/[SNIP]/[SNIP]/phpinfo.php rather than [url] shows PHP 5.3.0 is running. After applying minor tweaks such as adding ScriptAlias or SetEnv options the problem persists. I've Googled for a good while and have checked the permissions and the like and tried the advice of other users (XAMPP or otherwise) either resulting in PHP 5.3.0 being used or a HTTP 400 bad request/invalid URI error. I've stuck with the configuration above as this is correct according to the PHP manual.
FYI cgi-bin/php-5.2.6 is a soft symbolic link to /opt/lampp/bin/php-5.2.6 (I've added the FollowSymLinks option to the cgi-bin directory directive in httpd.conf). I've tried installing php5-cgi from the Ubuntu repos and setting it up in a similar way, to no avail. I've also tried copying the executables into the cgi-bin directory, pointing the Action line directly to bin/php-5.2.6 and dropping the -c /opt/lampp/etc/php.ini-pre1.7.2 option in the Action line. I've even tried commenting out the LoadModule lines for PHP which results in a HTTP 400 bad request/invalid URI error. This demonstrates the fact that the PHP CGI use is being ignored.
I've checked httpd.conf and the extra/httpd-*.conf files and ensured all required includes are being loaded. I know that it's probably something stupid on my part which is causing this! Given that I've tried PHP CGI builds in the Ubuntu repos I don't think this is an XAMPP-specific issue.
One of our Apache servers, version 2.2.3, is running three virtual hosts on it. However, while two are accessible, gray.mgh.harvard.edu, www.plastimatch.org, the third, cmrol.mgh.harvard.edu cannot be reached by any remote host.
I am at a loss as to why this is occurring. To that end, I am including the httpd.conf file as an attachment in the hopes someone can see what I missed, and help correct this issue.
How do I define the default virtual host to be served on port 80?
I have different configuration files in /etc/httpd/conf.d/ that look more or less like this:
Plus I have the namevirtualhost:80 in httpd.conf
For some reason if I connect to port 80 using the IP address or an alias not defined anywhere in apache config, the first domain configured (first alphabetically a-to-z) answers the call.
Is there any way to overwride this and set a default site?
Basically I'd like to answer with the right configuration if a precise site pre-configured is called on port 80, but if not I would like to redirect to a "default site"
I am very new to using Linux. I am trying to configure Apache. I have located the default in /etc/httpd and did a yum install httpd. Now, with this done, I am lost as is to how to configure. I am trying to make an ssl website with apache.
I have installed centOS Server edition on my laptop and installed apache and mysql on server, i wanted to understand how can i make my server on line and host my website on my own server. I am using MTNL Broad band, and i have one static ip, How to make web server in centOS 5.5.
I'm now configuring my web server to server different Virtual Hosts based on DNS name. Right now I store my files in /var/www per the default installation settings in Apache.
Questions: I want to change the Document Root to /home/username/public_html/example1.dyndns.org for the second virtual server. What do the permissions need to be in order for Apache to read the files in this location? Would it be best to force Apache to run as this new username instead of www-data?
My Virtual host setup will look something like this
I want to change the DocumentRoot as I am running a chrooted ProFTPd server and want to be able to update webserver files via FTP. I am running Ubuntu 8.04 LTS Server (CLI only).
I'm having some basic doubt! Consider 5 virtual domains has configured under a same server. I mean 5 different domains under same IP. Eg. mydomain1.com and mydomain2.com have IP 208.27.1.89. So when web browser request for mydomain1.com name server return IP address 208.27.1.89. Then browser contact IP 208.27.1.89 on port 80. Here comes my question how does apache know that the browser is looking for mydomain1.com not mydomain2.com. How apache differentiate the request for it's virtual hosts? By the way, what is a virtualhost ?
I'm trying to figure out why Apache is ignoring SSL Cipher statements when placed inside a Virtual Host. Specifically I'm trying to disable SSLv2 and only allow SSLv3 or TLSv1
In httpd-ssl.conf I have the following
Code:
And when I try and connect, I get the expected results.
Quote:
In my virtual host statement I have
Code:
The only difference between the two is the httpd-ssl.conf has -ALL in the CIPHER, and the virtual host entry has ALL. However if I try and change the ALL statement in the virtual host entry to -ALL I get the following error in my logs & get no content.
Quote:
Why it's not working in the virtual host statement? Unfortunately as many of you are probably aware it's impossible to gain PCI certification with SSLv2 enabled.
