I have Joomla installed at /var/www/joomla, if I navigate to http://localhost/joomla, I get a 404 error, but if I add index.php, the page loads. What is wrong?? Also I am not able to navigate to the administration part of Joomla for the same reason, typing in index.php doesn't load it in this case. Yes I have verified that all files are present in the directory.
View 7 RepliesI just did yet another fresh install of OpenSuse 11.1, (no DVD drive otherwise I would use the newer version), all updates have been performed, I installed apache2 and it's modules, php5 and some of the modules I needed, mysql, sshd for local only access, and webmin, postfix is used only for local mail between php scripts and the system, mainly because out-of-the-box, postfix is an open relay, and can take weeks to configure as an SMTP server, so I have to use php scripts that do not use a mail server, anyway.
The problem is, apache2 only seems to know how to serve php files, html files only get shown on ANY browser as source code not the contents.
I've been trying for 3 weeks,,, messing with this option, setting that option, and screwing up the system, hence reformatting and re-installing OpenSuse several times, so if anyone wants to try and get apache to serve html files properly and to have apache use mod_rewrite as default on ANY folder whether inside or outside the document root, I can give that person full ssh access. I've got to the point now, that I don't really give a damn what happens to the server.
What I should be able to do, is, leave the apache and php setting as default,,, upload either an html or php file to the document root and direct a browser to the address, and it'll work without changing a single item, the same is if that file has rewrite, it should work flawless, or if I upload an html or php file to a folder outside the doc root, I change the doc redirect to point to the folder, and it should work without changing anything else.
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
I have a domain, dns hosted, and apache serving up pages. this all works fine, so far. i even have a cms running. my confusion starts when i try to host a different site under a subdomain, ie. sub.mydomain.com.i have two vhosts in apache. one is mydomain.com and the directory is /var/www/mydomain.but, when i try to add another vhost like webmail.mydomain.com, and i try to put the root directory in /var/www/webmail, it doesn't work. when i try to access webmail.mydomain.com, i just get the site on mydomain.com.I feel like i am just missing something really simple here, but i have tried searching around for solutions to no avail.
View 4 Replies View RelatedA Linux (CentOS5.3) server is setup with apache reverse proxy. The reverse proxy server is opened to outside and an internal server is mapped to ProxyPass configuration. SSL certificate is also installed on the Apache reverse proxy server. The problem is, it is extremely slow in serving http requests through reverse proxy. There is no problem with server resources or bandwidth. When the internal server is directly accessed through Internet, there is no delay. The backend server and the reverse proxy server are also on the same switch (same subnet). When I searched the Net, there were recommendations to enable cache in Apache. I did so as follows in httpd.conf.
<IfModule mod_disk_cache.c>
CacheEnable disk /
CacheRoot "/var/cache/mod_proxy"
CacheDirLevels 5
CacheDirLength 3
</IfModule>
But still there is no progress. Do I want to enable cache in ssl.conf too? Or is there any other workaround to speed up Apache reverse proxy. Is there a way to check that caching is happening?
At the moment I'm doing:
for i in mdx/[0-9][0-9].png; do cp $i ../../d_s_c/images/mdx ; done
But as well as the directory mdx, I also have other directories called ntt, etc.
How can I say 'For everything in a subdirectory, copy it across to the same subdirectory over at at ../../d_s_c/images'?
Im using fedora 8 and have installed php5 ,and mysql and i see only php blank pages ,some idea? must be php.ini, but i am newbie installing php and apache, i disabled selinux, and grant all the permisssions to excecute..
View 3 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server. I used to run lighttpd with php in my server until now and all was fine. But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command. Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages. Instead it downloads php files like index.php when i open in browser. So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
View 2 Replies View RelatedI own several websites and have always developed on my local Apache server.
I am in the middle of releasing a new product on one of my sites and have been making rapid changes to the site based on feedback from customers, etc. as my product has gone live...
My local server is NOT refreshing pages. I make a change, click "refresh" in my browser and nothing happens.
I have tried clearing my browser cache and it makes no difference. Eventually (several minutes later) my changes happen.
Problem is, I need to be making these changes rapidly, and I really prefer to check my work on localhost before uploading it to a live server where I'm getting a lot of visitors right now.
This is a very recent problem as I have never had this occur before. Running 10.04.
I have apache running on my server, and also Zoneminder, a surveillance system running on the same machine. Both services runs without glitches, and I think apache's config as well as ZM's config are fine. I am not sure I understand how apache (not to mention the whole thing zoneminder, apache, web browser...) works. Pretty hard to manage when you dont know what you are doing. Also, when I try the supposed to work zoneminder webpage in my web browser, I get nothing (a blank page), or sometimes a "Not found" error message. The latest seems to be from apache because it is the same font as the "It works!" message when I try http://localhost:80
The only bit of information I have so far is in the apache error log (/var/log/httpd/error_log) and it says:
Code:
[Sun Mar 21 00:35:14 2010] [error] [client 192.168.0.100] script '/srv/httpd/htdocs/zm.php' not found or unable to stat
[Sun Mar 21 00:46:04 2010] [error] [client 127.0.0.1] File does not exist: /srv/httpd/htdocs/zm
It seems that the "zm.php" is missing.... That would be why Apache cant find the page?
I am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
I can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies View RelatedI'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
My site is at [URL]
Here is the output of ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
I just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
View 2 Replies View RelatedI have 2 servers that are mirrored. They host 3 separate websites. Two of these websites are regular HTTP and the other is HTTPS with Digest authentication as well. The reason there are 2 servers is because one is a primary and the other secondary in case the primary goes down. Recently I decided to upgrade the secondary server then make it the primary server. I have done most of the configuration and the sites using regular HTTP are working perfectly fine. The page using SSL is not. Apache fails to load and here are the errors I am receiving the the error log file:
Code:
[Fri Aug 13 09:27:00 2010] [warn] RSA server certificate CommonName (CN) `newserver.domain.com' does NOT match server name!?
[Fri Aug 13 09:27:00 2010] [error] Unable to configure RSA server private key
[Fri Aug 13 09:27:00 2010] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
For the first warning, I cannot find anywhere that says the CN "newserver.domain.com", only what the CN is in the SSL key. I have no idea where to even start with the other errors.
Most of my googling odysseies lead me to articles which talk about compiling apache & php from the source as this is touted to be more flexible. But the problem we have is this...we already have an apache 2 web server running. Now how do we serve php pages of it.
View 1 Replies View RelatedI've enabled LDAP authentication on my 2.2.15 Apache server, but now pages load very slowly. As in, 1.515s with it enabled, and 187.4ms without (just the base page, numbers collected via Firebug). Here's my LDAP config (other directives snipped) -
Code:
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LDAPSharedCacheSize 500000
LDAPCacheEntries 2048
LDAPCacheTTL 3600
LDAPOpCacheEntries 2048
LDAPOpCacheTTL 3600 LDAPTrustedGlobalCert CA_DER ssl/ldapserver.der
<Directory "/example">
AuthType Basic
AuthBasicProvider ldap
AuthName "intranet credentials"
AuthLDAPURL "ldaps://ldap.example.com/ou=ldap,o=example.com?mail"
Require ldap-group cn=example,grp,ou=memberlist,ou=groups,o=example.com
How can I speed this up, or at least determine why it's so slow?
I want to put Google analytics code on all legacy pages on my server, most of them don't have a template so I was wondering if Apache can automatically append the code.
View 2 Replies View RelatedI would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
View 9 Replies View RelatedI rented a server to run CS 1.6 game servers. I had someone install Apache and configure my server to be able to use control panel for my game servers( i am running 4 gservers and have 5 ips = 1 ip is free). When i type my primary ip in the web browser it displays the Apache test page.
My question is can i add pages to the Apache without messing up anything with the control panel or my game servers. I am familiar with html. My primary ip is used for 1 of th egame servers but i can change that if necessary. And if possible to add pages how to add a site name, sth like [url] instead of entering the primary ip to display the content.
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedFirst off please don't say "go read the man page". I need instructions for newbies
I basically want certain folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working. Someone kind enough to help out a confused person like myself?
I'm running a server and Cogeco doesn't want that.
What I want to do is make it so when someone goes to my_domain/ apache will pretend it doesn't exist, but I want subdirectories to work still.
What I tried was denying access to /var/www, but the apache returns with a message for that.
installed ubuntu 8.10 64bit on left over parts for file serving with windows 7, tried the sample config file that installed with it with no luck, then tried new config file, looking at the samba.org website and other peoples configurations i came up with this
[global]
netbios name = NETBIOS_NAME
workgroup = workgroup
security = user
[code]....
I have a domain.com site up and running on my server. I just bought domain.net, domain.org and I would like it to point to the same site on domain.com. I am not sure how to go about doing this.I used zoneedit for my dns. So far I have pointed my 2 new domains to the same dns as my .com on zoneedit and I have created (A) ip address for them. If I did this correctly, the new domains are pointing to my server and all is left is to edit the virtualhost?
View 3 Replies View RelatedMy samba domain controller will not serve up scripts upon login, and acts very slow when not connected to the Internet. Also, network browsing from windows boxes shows no computers on the network once all this happens. Once the net connection comes back up, everything is fine.
Domain server:
Ubuntu 10.04.2 LTS
Samba 3.4.7
Router: Smoothwall Express 3.0-polar-i386 3.0 (update6). Router is set up as DHCP, and appears to be serving up normal IP's when the Internet connection goes down. I can ping the domain server at its normal IP when the connection goes down.
Heres my smb.conf:
Code:
[global]
log file = /var/log/samba/log.%m
passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:* %n
[code]....
This only happens when our internet connection goes down. When its up, everything is works fine.
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View RelatedI have it set up so when I go to URL... it shows my server. I'm not sure how I can make it viewable to everyone though.
View 3 Replies View RelatedI basicly want certian folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working.i have
Code:
Deny from all
AuthType Basic
[code]....
Recently I've been migrating my development environment to ubuntu (desktop edition, because this is not a server, is just my computer) and I've been having some problems with apache case-sensitive (I'm an absolute beginner with it). I want to make apache case-insensitive, but I didn't find a complete and easy to follow solution online more than doing this:
From the command line, type sudo su to get root privileges.
nano /etc/apache2/mods-available/speling.conf
Type CheckSpelling on and hit ctrl-x, y to exit and save the file.
type a2enmod and then speling and hit enter.
type /etc/init.d/apache2 reload to reload apache.
Mistype a url to test it.
I found that here: [URL]. It worked for some things but I'm still having a lot of problems with capitalization. I don't wanna go back to windows an ISS. BTW I'm using ubuntu 10.10 desktop edition 32-bits, and I've not moved any apache configuration more than that described above.