I've tried to copy my files from Xamp httdocs in windows to /var/www/html,
but I can't paste the file, what should I do so I can paste the files ?
I have logged in as a root..
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
I have installed VirtualBox on a MacBook and installed RHEL6 on a guest server ("Orion") in VirtualBox. I am trying to follow the tutorial at xenocafe on Apache Web Server Tutorial for Linux. I've checked a few other websites for port forwarding, and have used VBoxManage to set
Apache/GuestPort" 80
Apache/HostPort" 8888
Apache/Protocol" TCP
[code]...
I am able to ssh into the Virtual Box guest server using:
$ ssh -l rmt1 -p 2222 localhost
I believe this means that the port forwarding works. I am able to start and stop httpd on the guest with no warnings. I retired a problem with DocumentRoot by setting SELinus to disabled. My trouble is that: When I bring up a browser on the host and try localhost 8888 and expect to see my sample html page housed on the guest server (located under root / www), what I get is a spinning wheel.
And when I bring up a browser on the guest and try localhost 80 and expect to see the sample page I made, what I get is the well-known Apache test page. I am stuck in knowing (1) how to cause port 80 output from the guest to be interpreted by the host browser searching port 8888 (Or, Why does ssh into the guest work but http out of the guest not work), and, (2) how to arbitrarily determine the location of what the very first webpage is that will be loaded.
My setup is two laptops connected by crossover cable. One runs Windows xp the other Fedora 13. Neither is connected to internet. I'm using a subnet of 192.168.1.x On Fedora eth0 is up, apache runs because it creates pidfile. Everything pings fine. Windows xp ip pings fine from command line. Gave Windows xp a static ip of 192.168.1.1 mask 255.255.255.0 and gateway 1.2, same as eth0. xp says it sees the server. eth0 is up.
DirectoryIndex looks at index.html. I created that file with very simple code and put it in document root. Document root permissions are 755. Access_log 770. Error_log 644. Apache User 755. Listen 80 When I type the ip for eth0 (192.168.1.2) into firefox, firefox gives me an error message - can't find server. The connection status says its connected.
The error log includes a line: [warn]./mod_dnssd.c:No services found to register I don't know what this means. Apache is not writing to access_log. When I cat the path to access_log I get nothing, then a command prompt. I'm looking for the part I'm missing that will let Apache serve that index.html file to firefox so I can see how my code looks to firefox as I go.
here is the upload form:
<form enctype="multipart/form-data" action="uploader.php" method="POST">
Choose a file to upload: <input name="uploadedfile" type="file" /><br />
<input type="submit" value="Upload File" />
</form>
[Code]...
I want to backup my apache website using tar. I want to make sure all the permissions and such stay the same so that if I restore a website, it's ready to go exactly as it had been.I am using the following command and would like to know if there is anything else I should neeed to do?
tar --xattrs cvzf backup.tgz /path-to-webserver-files
Now my other question is since tar doesn't store absolute paths, when I run the restore I have to be in the root directory? In another words if I run the command in a user directory will tar do something retarded like encode the paths as ../path-to-webserver or will it just be path-to-webserver so that when I run the restore from the / folder it will automatically go into the right place?
I'm running a server and Cogeco doesn't want that.
What I want to do is make it so when someone goes to my_domain/ apache will pretend it doesn't exist, but I want subdirectories to work still.
What I tried was denying access to /var/www, but the apache returns with a message for that.
I have it set up so when I go to URL... it shows my server. I'm not sure how I can make it viewable to everyone though.
View 3 Replies View RelatedI basicly want certian folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working.i have
Code:
Deny from all
AuthType Basic
[code]....
Recently I've been migrating my development environment to ubuntu (desktop edition, because this is not a server, is just my computer) and I've been having some problems with apache case-sensitive (I'm an absolute beginner with it). I want to make apache case-insensitive, but I didn't find a complete and easy to follow solution online more than doing this:
From the command line, type sudo su to get root privileges.
nano /etc/apache2/mods-available/speling.conf
Type CheckSpelling on and hit ctrl-x, y to exit and save the file.
type a2enmod and then speling and hit enter.
type /etc/init.d/apache2 reload to reload apache.
Mistype a url to test it.
I found that here: [URL]. It worked for some things but I'm still having a lot of problems with capitalization. I don't wanna go back to windows an ISS. BTW I'm using ubuntu 10.10 desktop edition 32-bits, and I've not moved any apache configuration more than that described above.
Is there a quick and easy way to make sure apache always starts with a certain nice value?
View 1 Replies View RelatedI am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
[Code]...
I need to setup a web server with apache (worker) and php. What is the cleanest way to this with Debian Squeeze?
View 1 Replies View RelatedI am trying to make my Apache server show symbolic links in a directory listing, but have so far been unsuccessful. In my latest attempt, I have placed the following code in .htaccess, in the directory with the symlinks that I want listing:
Code:
<Directory />
Options All
</Directory>
Im httpd-vhosts.conf, I have also placed the following code within the relative <VirtualHost></VirtualHost>:
I have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View RelatedI'm trying to send files from a Unix server using http/curl to a Linux webserver running Apache. I get the following PUT error message when and the file does not send:
<title>405 Method Not Allowed</title>
</head><body>
<h1>Method Not Allowed</h1>
<p>The requested method PUT is not allowed for the URL
What is recommended way to set permissions of folders VAR/WWW for use with apache in 11.04? I would like to let the user "ABC" have access to read/write the website files in this directory. How should permissions on these files be set?
View 2 Replies View RelatedThis is probably a pretty basic question seeing as I'm pretty new to Ubuntu Server. I'm running a simple website from my Ubuntu Server machine with The files are all stored in /var/www/ and then subdirectories. The problem is that when I add files through FTP I need to go and change all of the file permissions since by default they do not have read access so can't be accessed through a web browser on another machine.How can I make the default permissions readable for the directory and all new files that will be moved in it
View 5 Replies View RelatedI just set up an ubuntu server with websvn, webdav, etc. Works really nice, but additionally I would like to have an easy interface for sharing some files with firends/collegues via webinterface. I was thinking of something like WebShare form helios or mydrive/etc. with easy access and usercontrol.
I am searching for several hours now and didn't find anything really usefull. Is there any open source tool/apache plugin which can do that?
For some reason my directory listings are missing their icons for Apache on Ubuntu Server. An example: [URL]. They all come up not found.
View 6 Replies View RelatedI am sure this information is out there somewhere, but Googling apache access.log and hostname does not give you any good leads... so I hope someone here might be able to provide me with a quick answer...I am setting up a cluster of web servers, so I would like to name the access.log and error.log with the hostname of the individual servers to be able to distinguish one from another.
View 4 Replies View RelatedI'm working on a side project where I would like to install three ubuntu server systems,each with only one task.So server0 would be the apache server, server1 would be the database and server2 would be the file server.which key terms I should be researching?
View 9 Replies View RelatedI have made out a little software as to talk with my friends through network . there are two parts : one is listening to receive messages ,the other will send messages. but the firewall is bothering .so I want to know if I can make my software listen to port 80 while apache is also running .
View 11 Replies View Relatedwhen i go to my server's IP address, the index.php files is downloaded, not run, how can I fix this? I have php5 installed and enabled.
Quote:
root@ubuntu:~$ ls /etc/apache2/mods-enabled/
alias.conf authz_user.load dir.load php5.load
alias.load autoindex.conf env.load reqtimeout.conf
auth_basic.load autoindex.load mime.conf reqtimeout.load
[Code]....
I posted this question a while ago but haven't had any luck getting it answered so I reworded everything to make it more clear. I started an Ubuntu web server on an old work laptop. The purpose of this server is to host a small file-sharing site, a forum, and a wiki. I have no prior experience with command line Ubuntu but am trying to figure this all out.
So far Ive setup the LAMP server, so apache, mysql, and php are installed. Ive also installed phpBB3 and Mediawiki. Both phpBB3 and Mediawiki are able to open from inside my LAN. I also have SSH setup and am able to use putty to manage the server from inside my LAN. Mediawiki runs slow internally but this is a secondary concern.
Externally to the LAN I can access the webserver using SSH(but sometimes it is too slow for anything that opens up such as nano or the SQL password prompt to display and the connection drops). I can also browse to the site and see the default apache welcome message. But I cannot open the mediawiki or phpbb site. Both will sit indefinitely and not open. The access log on the server shows that the request is being passed through though.
how to create an entire server from scratch using a minimal install. I know Ubuntu Server 10.04.1 comes with packages that can be included during install but for the sake of learning I only installed SSH access.
I was able to get Apache2, MySQL, PHP5 installed and running fine. What I'm trying to do next is setup DNS so I can point fragdata.com to my Ubuntu server and have other people see my test site.
I have registered the nameserver ns1.fragdata.com with my IP and updated DNS in my registrar. I followed the tutorial but "dig fragdata.com" gives me the following:
Code:
root@linux-server:/home/syvil# dig fragdata.com
; <<>> DiG 9.7.0-P1 <<>> fragdata.com
;; global options: +cmd
;; Got answer:
[Code]....
In order to pass PCI compliance I need to upgrade our webserver from php 5.3.5 to php 5.3.6. I found this: [URL] however it doesn't seem to work. My best guess is due to the fact I have 64bit server. Is there something else I can do without going through a compile?
Distributor ID: Ubuntu
Description: Ubuntu 11.04
Release: 11.04
Codename: natty
Linux 2.6.38-10-server #46-Ubuntu SMP Tue Jun 28 16:31:00 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
I have a web server in my kitchen with apache running on it. Since the upload speed is quite low due to my isp I would like to execute a bash script that uploads a file to another server through a website (which is htaccess protected) The idea in general: Someone with access to my website browses through a folder, copies a file path to an input form and presses "upload". Rather than executing a bash script directly I could have a cron job running in background that finds the path and then uploads the file to the other server I have userspace on and is accessible via sftp/ssh. The file would be than erased later after a couple of days or so. That person would be able to access the file with higher speed some time later without logging in via ssh and doing all that manually.
View 2 Replies View Related