My wife was using cryptkeeper fine, then she right-clicked the keys on the panel and did something, I'm not sure what. Anyway, the keys you click on to open the encrypted folder are gone and I can't figure out how to get them back. System monitor shows cryptkeeper running. I can kill it and re-start it, but the keys don't show on the panel. I'm running ubuntu 9.10.
View 1 RepliesRan the most recent updates several days ago and now System Monitor show my CPU at %100 constantly although it shows no processes running.
View 9 Replies View RelatedI am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
i have an old laptop running as a server it has no video output so i remote desktop to it when making changes using teamviewer. just went into the system monitor and processes to find that teamviewer.exe was running...this has kinda confused me as i thought .exe couldnt run unless using wine. which has to be configured in most cases too. i mean the program is working perfectly but why the .exe?
View 4 Replies View RelatedI could not find details of what CryptKeeper was doing and I worked this out. It shows how to open and close CryptKeeper files using encfs form the command line. I hope this helps others.
Ubuntu karmic 9.10. CryptKeeper 0.9.4-1 encfs 0.5.2-1ubuntu1 also works in Mint8. Tom Morton author of CryptKeeper site: [url]
How Gnome Cryptkeeper works with encfs
In CryptKeeper create a new encrypted folder:
The directory above is created and also another hidden one called: /home/ian/.aaaaaaxxxxTestCryptKeeper_encfs which contains one hidden file called .encfs6.xml. As you create additional folder and files in the /home/ian/aaaaaaxxxxTestCryptKeeper additional folders and files with encrypted names are created in /home/ian/aaaaaaxxxxTestCryptKeeper 4L9KBI4IeoAKOoZ,IwzVyn2VPGysXt-JCbStUej5Ewnn90. These mirror any files and folders which you create in the encrypted directory except that there names and contents are totally encrypted.
The above CryptKeeper directory can be created anywhere within the Linux file system, for example, on another partition. In each case two directories are created within the parent (in this example /home/ian/), one with the original directory name, the other preceeded with a "." and followed by "_encfs".
How to open a directory created with CryptKeeper using encfs.
Provided you copy the directory like .aaaaaaxxxxTestCryptKeeper_encfs and all its contents, it can be opened anywhere using the following command. (Note that full path names are needed.)
encfs /home/ian/.aaaaaaxxxxTestCryptKeeper_encfs /home/ian/aaaaaaxxxxTestCryptKeeper
The mount command will then show:
If /home/ian/.aaaaaaxxxxTestCryptKeeper_encfs does not exist you will asked if you wish to create it and you will be asked for a password twice. In this case it will not be in CryptKeeper unless you then import it.)
If it is a CryptKeeper file then it appears in CryptKeeper file list as opened and can be closed from there. To close from the command line type:
Note unmount will not work for these files.
there's this process on my system monitor that opens and closes by itself it does not have a description or a name and makes my hard drive spin like hell
View 1 Replies View RelatedI'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies View RelatedI tried to do a scheduled software update several times today (8/20/11) and nothing seems to download, though I do get the "Downloading" PackageKit dialog message (the System Monitor shows practically no network activity). In between tries I downloaded some 600 MB .iso files (about 10 minutes each) so I know my internet is working properly. That leaves either PackageKit got hosed in my last update, or servers are down.
View 2 Replies View RelatedGood day, installed ubuntu 10.04 64bit yesterday on my laptop just to test everything before the release at the end of the month. However I took a look at my System Monitor and my second CPU(2) is constantly running at 100%, however theirs no apparent processes to cause this.
View 1 Replies View RelatedI've just upgraded to 11.04 from 10.10. When logginin in with the default GUI (Unity?) and selecting Crypkeeper, I cannot see the icon that enables me to mount the encrypted file system.
In classic, that icon what at the top menu bar.
I just installed a new GT240 w/HDMI and I have a new Vh232H monitor w/HDMII connected the video card and monitor via HDMI cable and started the computer.Nothing.The monitor is not getting a signal via HDMI.
View 1 Replies View RelatedWe are running IPmonitor to monitor the disk usage on our Linux servers. It does not seem to coincide with what is reported when running df -h. For example on a Red Hat 5.3 server - our IPmonitor shows that 85% is used on the /usr partition, however when I do a df -h on the server it shows that 91% is used. Why there would be a discrepancy? IPmonitor uses SNMP.
View 5 Replies View RelatedMy brother got a new 120hz monitor, but can only get the old one to work. If he boots up with both of them connected in windows xp they work fine, but in Ubuntu 10 only the old one works. If he tries to detect the monitor in Display Preferences, nothing happens. The old monitor is connected to vga output (lcd with vga only) the new monitor is connected to dvi with a dual-link dvi cable. We know the graphics cards cannot provide 120hz, for now we run the monitor at 60hz until he upgrades the rest of the pc (sandy bridge i guess).The 120hz monitor worked fine until he changed graphics card from a ATI radeon 9200 to a geforce 3 ti 500.
He has tried
sudo dpkg-reconfigure xserver-xorg
and detect monitor in Display Preferences but no dice. Could he try restricted drivers?
System specs:
Ubuntu 10.04 32bit
athlon xp 1700mhz
1GB ram
ati radeon 9200
geforce 3 ti 500
lg w2363d
hey guys. recently upgraded to 9.10. a mouse hover over my battery applet only shows percentage, not time remaining.
View 2 Replies View RelatedIn the past few months I've tried to upgrade from an old version of debian-based AVLinux to straight debian, modern kubuntu, ubuntu, and the latest AVLinux. In each case I get a distorted display that renders the computer useless, and I have had no luck figuring this out since I can't even log in. I don't have the trouble with older (k)ubuntu or AVlinux, or debian (few years ago, not sure version tried last).
Monitor is ASUS MS246H (widescreen 1920x1080 LCD)
MB/Video is ABIT NF-M2 nView AM2 NVIDIA GeForce 6150
I've tried both VGA and HDMI cables with the same results.
full screen:
Close up of upper left:
result of another install attempt:
At this point I have to upgrade, having messed up my old install too much when trying to recover from a power outage this AM.
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
my isp is putting a max bandwidth in my area and I need to monitor my downloads and uploads per month. Is there anything that has a gui that is easy to set up and just shows the amount of data downloaded and uploaded per month. Also if possible to do a pop up if you set a maximum bandwidth amount.
View 2 Replies View RelatedI've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
When I did update a few minutes back, it showed me the following messages
Quote:
/boot/initramfs-2.6.31.5-127.fc12.i686.PAE.img: contents have been changed
/lib/modules/2.6.31.5-127.fc12.i686.PAE/kernel/drivers/gpu/drm/nouveau/nouveau.ko: No such file or directory
[code]...
I've not changed contents of any of these. Then why does it show me this messages? I did install akmod for my Nvidia graphics card for which I followed the steps mentioned for nouveau.
I'm on Debian 5 - when I run the w command, it reports 2 users, but I'm the only person logged in. Is this cause for concern?
Code:
curos@histeria:~$ w
16:17:25 up 4 days, 11:56, 2 users, load average: 0.00, 0.00, 0.00
[code]....
How can I track down what's using my nic and kill it (if appropriate). There are no applications running which might be authorized to send and receive packages, so I don't really know why the System Monitor shows network activity.
View 9 Replies View RelatedI see these activities logged on a fairly regular basis in /var/log/auth.log and was wondering if this is normal activity?
firefox: gethostby*.getanswer: asked for "ftp.cs.rose-hulman.edu IN A", got type "DNAME"
The format is always the same, though sometimes the address is a regular Internet site.
My elderly HP Laserjet 4P has worked well for over 15 years. I have it connected to the home network via a Trendnet TE100-P21 Print Server, and setup has always been straightforward and easy. The whole setup has worked quite well with Fedora 9 or 10 thru 14, but then stopped working within the last couple of weeks. I'm assuming an update broke something, as I can find no other reason. When I send a print job or test page, I get a Print Error dialog. The print que shows a "stopped" status for the job. In the Error dialog I use the Diagnose button and step through until I get the Status Messages dialog, which informs me: "The printer's state message is: 'Data file sent successfully'".
Then I enable debugging and send a test page. Stepping through the dialogs it tells me it cannot detect a problem, and gives me an error log, which I've attached. The Trendnet server has a web admin interface. In that interface I can send a test page successfully. Also, I can open a VirtualBox (Windows XP) in Fedora 14, and successfully print from it. My print setup in Fedora is the same as it has been for several years now, and nothing has changed on that end. I have rebooted Fedora and the Trendnet server. All other computers/OS's on the network have no problem printing, only this Fedora 14, and only recently.
if you go to Edit > prefs > security and choose to show saved passwords they are displayed without entering root pw. This seems to be a huge security hole. How do we fix this?
View 8 Replies View RelatedI've been having issues where I am running out of video memory on my ATI Mobility Radeon 5470 (latest Catalyst), and I would like to be able to examine what is going on with it.How can I monitor my video memory like how I can monitor my CPU and RAM with top or system monitor?
View 2 Replies View RelatedAfter installing ubuntu 10.10 on pc i had it running fine for roughly 2 weeks. i have selected automatic login so i do not need to mess about logging in etc, but recently my pc asks for my password to unlock keyring once it shows my desktop.
View 2 Replies View RelatedIn System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
I am running Fedora 13 - 64-bit variety and using KDE as the gui. No real issues asides from machine not exactly flying, but then this is a mere core 2 duo 1.6 with 2 gigs of ram, so not unexpected...
When I run top I see 3 users indicated - which worries me somewhat... I am the only user on this machine.
I come from a Debian / Ubuntu /Gentoo knowledge-base and this laptop is a fresh install, encrypted partitions, temp has own partition (encrypted too) and obviously the firewall is on, with ssh service turned off and ssh access removed in the firewall....
is this 3 users in top normal, or have i managed to be hacked in the 3 - 4 days since I started the install ? In all this time I have been sitting behind a router when on the net.
Am I looking at a fresh install, or are there valid reasons for the extra users?
I just ran "users" in terminal and I show up 3 times - I have only logged in once, through the GUI and no extra access routes
I like the easy readability of fwlogwatch (as compared to the Log File Viewer). But fwlogwatch doesn't display port number or date when I run it in terminal.
Is there a log viewer that displays clean like fwlogwatch but displays all the information that Log File Viewer does?
I have a compaq laptop with a hard disk separated in three partitions:Partition 1: Ubuntu 9.04Partition 2: Windows XPPartition 3: DataI usually work 95% of my time with Ubuntu, but store all my data in the data partition, so the information is always available no matter if I work under Windows or Ubuntu.The system has been working perfectly well for several months, but a couple of weeks ago I detected that some subfolders are shown as empty, but I know that there are several files on them (mostly pdf files document-scanned). When I use windows, all the files are shown correctly. In other folders, the system shows some files, but not all of them. (again mostly PDFs are not shown).My Ubuntu system is fully updated. The data partition is in NTFS format. Linux is EXT4. Windows is NTFS again.I would appreciate to know if any of you guys have detected a similar problem and if so, how to solve it.
View 6 Replies View Related