my isp is putting a max bandwidth in my area and I need to monitor my downloads and uploads per month. Is there anything that has a gui that is easy to set up and just shows the amount of data downloaded and uploaded per month. Also if possible to do a pop up if you set a maximum bandwidth amount.
View 2 RepliesI'm looking for a powerful network traffic monitor that can do all of the following (or at least a combination of tools that can do the following):
Tell me how much data was downloaded/uploaded on an interface this month and the previous month tell me how the traffic was used throughout the monthshow which internal IPs (IPs in the 192.168.1.0/24 network) used how much traffic show which ports/protocols on those IPs used all that traffic
Hhow LIVE traffic flow statistics that can tell me total speed of traffic going through an interface as well asshow which internal IPs (IPs in the 192.168.1.0/24 network) are using how much of the traffic show which ports/protocols on those IPs are using that traffic
This tool will run on a linux router through which all my internal PCs are connected to the Internet. This means the tool(s) need to work with NAT (traffic being forwarded and not necessarily destined for the interfaced being monitored).
The distribution being run doesn't have a package manager so any packages or dependencies have to be manually compiled and SCPed over file by file. For this reason, the tool/tools need to be simple (things like vnstat, not things like ntop that have their own web interface).
I know that vnstat can tell me the first bullet point so it's only there incase there's a tool out there that can do everything. If there's a tool that can only do the second or third bullet point, that's great too - I'll just keep using vnstat and look for something else to do the other task.
At present I have to live with a 5Gb/month data volume limitation. Due to having to monitor this usage, I have been forced to use the software that came with the web dongle - and that means having to use Windows (spit!)
Can anyone recommend a Linux package I could download that readily shows how much data one has uploaded/downloaded over a set period?
I am on a limited broadband plan with 4GB download limit per month. Is there any software which can tell me how much data I have downloaded in a particular period of time?
View 1 Replies View RelatedI'd like to find some sort of program which can tell me how much incoming data I've had in the last 24 hours. It goes by hours, not by days, but anything that's simple and that can display this will do. Is there any sort of program that does this? Something that would fit well with Ubuntu's style wouldn't hurt, but I'm not that worried about it as long as it does the job.
View 1 Replies View RelatedI want to use the tc rules for bandwidth control in my lan.i have a linux router(traffic shaper).how i can limit the amount of bandwidth every user has access to per day? For example, any user can't download more than 2 gb per day(or per month).
The information about lan's users(such as a group type,userid,etc.but not any thing about time limiting per user)is in ldap directory on ldap server.the linux server uses ldap server for authentication users when the user login.
i am using ubuntu 10.4, i have attachedd my desktop screenshot , my problem is that i use no software that uses network but still OS uploads data from my pc, is it something to worry about my network security ? and is any way to check which file is using network and how much it is using. [URL]...
View 1 Replies View RelatedI was wondering if there was a Windows or Ubuntu way to limit the amount of data that is able to be sent over the internet between certain times, eg. Between the times of 7am and 7pm can only download 300 MB from the web, when this limit is reached the web is either disconnected or slowed down.
View 2 Replies View Relatedon the mac there is a piece of software to change the system clock so it shows the stardate instead of the month, day and year. Is there something like that for Ubuntu? I think it would be pretty cool to have a star trek themed desktop
View 9 Replies View RelatedI come from a windows world where there's a magical tool called netlimiter that allows me to shape bandwidth and watch upload and download traffic: And easily check stats: I wonder if there's such a beauty for linux?
View 1 Replies View Relatedis there any way to monitor each application network bandwidth usage ?I've used gnome-system-monitor, but unfortunately it just show the total network activity
View 3 Replies View RelatedI'm on Comcast (insert vomit sound here) and they have a 250GB monthly limit. I don't think I'm remotely close to this on a normal month and want to figure out if I could perhaps squeak by with the 5GB limit imposed by Verizon's 3G wireless broadband.
I'm ideally looking for a quick easy-to-use GUI application, rather than something that's done via the command line.
I thought perhaps I could look in my Account and find a nice "You've used X percent of 250 GB thus far" window. Then I called, but Comcast couldn't tell me. They just borked me off to some Windoze application 3rd party which I'm supposed to install.
I run Skype and occasionally download Fedora iso images and so on. Rarely am I doing more than surfing the web, chatting, and sending emails. I doubt I'm even close to 250GBs but I'm guessing that 5GB will end up being problematic.
Are there any programs that will keep track of how much bandwidth I'm using? It'd be great to have an application that runs there in the taskbar and just shows a graph of how much I've used thus far.
I want to know my DSL bandwidth usage in the last 15 days.I have no network monitoring software installed.I have the default installation and my distribution is Opensuse 11.2.Is there a way I can get that information from the vanilla system?
View 2 Replies View RelatedI want a bandwidth monitor which performs constant monitoring of the ethernet. I want to see how much bandwidth I am spending by opening each website, downloading, etc. A small program which can remain "always on top".
I am using Gkrellm but the problem is it does not updates itself constantly, I mean I have to close/open its eth0 monitoring window to view changes (I am not talking about restarting Gkrellm, only the bandwidth window which shows the daily, monthly bandwidths)
I have a HP-DV7i Laptop or the (HP Pavilion dv7t-4100 CTO Select Edition Entertainment Notebook PC) they call it.....
With the lintel i7 quad core 720.. It has 8 gigs of RAM and I am using a Corsair F120 SSD for boot and a 320gig for back up, and the video card has 1gig of RAM...
o ya and I am running VM BOX with windows 7 (But have deleted it for now, and reinstalled ubuntu 10.4)
Problem: The system says I only have 3 gigs of RAM ??? When in fact I have 8 gigs, And it runs HOT! like it is over working itself.... Do I need some HP Linux based drivers of something?
Is there any tool in linux, so that the bandwidth, each user consuming, can be monitored.
View 2 Replies View RelatedMy rsync takes backup of everything from the differenct linux servers to my backup device which is 2 TB only .Since it takes almost full backup of source , it consumes space lot in the backupdevice. So i wanted to keep all my backup files of one month old latest files in backup device, it should remove all files more than one month data.
View 2 Replies View RelatedI use Firefox 3.5.9 and Ubuntu 9.10.
There is a suspicious amount of data (more than a megabyte) being uploaded from my computer whenever I log onto a commercial web site on which I advertise rental properties.
Is there any way I can see the data being uploaded - I am pretty familiar with the Unix/Linux system and commands.
i need your help for executing an script to copy data from upload folder to some other after successful upload. Do you have any idea for this?
View 1 Replies View RelatedFirstly i'd like to introduce myself before I ask my question, i am currently studying a "Network Operating System 2" course, and in the syllabus the professor decided to use Ubuntu Linux for us. This is a first for me and I am truly greatly interested in the OS. It seems like a solid system once you get to know the deep foundations of it. The professor has already given us an assignment, but I feel its not fair as its just a bit too much from out of what he taught us .. He did not teach us what he is asking for. He asked us to create to a text file which lists the Sales from two Salespersons, and each one will have an amount for each month .. So 12 entries for each salesperson.
Using that text file, we should write a bash script which would read the values from the above text file, and produce a "Monthly Sales" text file, which shows the total sales of each month (combined from both the salespersons). I would like to ask for some guidance, some help on how to start. It's just that he didn't teach us any commands about this matter.
how i can use the cal command so it displays the current month and the next month, i know you can use cal -3 9 2007 to show the previous current and next but i just want to display the current and next.
View 9 Replies View RelatedI would like to measure the amount of traffic my webcam is sending. What is the best way to do this? I tried iostat command, but i do not see the webcam traffic back.
View 1 Replies View RelatedI created a the class like this for shaping the packets with a specified bandwidth rate.....
tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 1: htb default 15
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 750kbit ceil 750kbit
tc class add dev eth0 parent 1:1 classid 1:3 htb rate 600kbit ceil 750kbit prio 0
For Our Requirement:-
I dont want to specify the bandwidth rate strictly like this rate750kbit ceil 750kbit,based on whatever speed is coming which should allocate the bandwidth rate for particular class...I need one application for finding the upcoming bandwidth & Is any other method is there for specify the bandwidth rate in a classes.
Well, when I copy large amount of data the other applications than Nautilus freezes until the copy is done...
So, what can I do? Because when backuping some data this is really annoying =/
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
i'm trying to write a program with c socket programming,what i am trying to reach is a program which will calculate a computer's downloaded data from the internet,just to know how much he/she download?
View 1 Replies View Relatedin the past ive used w32 codecs to allow me to watch downloaded tv shows etc. im having some issues getting it to work with fedora 13 as i cant find w32 codecs in the add software search
View 1 Replies View RelatedMy machine has 4 SATA 2 West Digital 1TB disks. I made 2 partitions on each of them, 500GB for each partition. When I started using them I check their I/O using iozone. The first partition has 100MB/s for read, 70MB/s for write. And the second partition has 80MB/s for read, 55MB/s for write. All 4 disks has the same result.
As I use on, the I/O speed on each partition decrease, to different extend. For example, for the 4 first partitions, the write speed varies from 69MB/s to 56MB/s. And I have same amount of data on each of them, all used 11%.
My guess for this is the disk block allocation policy. This is caused because some disk starts writing from inner location while others writes on the outer edge, even though amount of data on each disk is the same.
I have a probably kind of unusual problem - when a USB stick is connected to the PC and data is copied from/to that stick, I need to know how much data has been copied. The data itself if not interesting, just how many bytes. I unfortunately don't have access to the program that does the copying, and most of the data doesn't end up on any drive (it just gets read and discarded), so I can't simply check the size of a target directory or something like that. I have had a look at usbmon, but that seems to produce way too much data - the normal case would be around 10 gig of data being read, and I can't have that blown up by a factor of 10 and lying around on the hard drive
View 4 Replies View RelatedIs there any tool similar to NetMonitor for Ubuntu, which can be used to monitor the data usage.
View 1 Replies View Related