When i first started with ubuntu i added a blue border that appears on all my windows and my panel and have been trying to remove it for ages but have no idea how i added it, i assumed it was in the appearance tab, but changing window borders in theme->customise has no effect.
View 9 RepliesI recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies View RelatedSometimes when I boot up and log in, I have no window borders. The entire area with min/max/close is just gone. If I log out and back in, most times it comes back. What gives?
View 5 Replies View RelatedI'm running Ubuntu 10.04, and it's been flawless until tonight where, after an update, the normal window borders stopped working and were replaced by these ugly never-seen-before borders. I can get the borders back, but it'll kill compiz, but if I have compiz, then I have the ugly weird boarders
View 2 Replies View RelatedI've just had enough of Enlightenment e16, so I uninstalled it. Now my window borders have disappeared and I can only input to one window - the first one I opened. If I want to input to another, I have to close the first one. I thought maybe gdm wasn't running (I'm using GNOME), but this is the output of ps -A | grep dm:
Code:
gdm-binary
gdm-simple-slav
gdm-session-wor
There has to be an easy way to change window border width (pixels). Not sure how mine got so wide but I have looked in Appearance, Compiz, Emerald Themes, etc and I can't figure it out! I am using Ubuntu Jaunty and have searched high and low. I think it's gnome but I'm confused about windowing environments. Found some ideas (tried them all - all seemed reasonable (such as holding ALT while mousing, etc). So far no luck.
View 3 Replies View RelatedI upgraded to 10.04 but problems started very quickly: I can see my desktop but when I start an application, there are no window borders or buttons to close/minimize that application! They just vanished. Also, opened windows don't appear on the taskbar, so I can't switch between windows, not even with ALT + TAB. The mouse isn't an arrow anymore, but a dark cross :s
Some specifications: Dell vostro 1000, ATI Radeon IGP Xpress 1150 (128mb shared), AMD64 Turion Here is what I did during the upgrade: everything default, except for once, when it asked me what to do with menu.lst (keep the old one or replace it with the newer version) I chose "replace" (default was to keep the old one). Can that be the reason?
We've all probably had this issue at one time or another.Window borders disappearing when Compiz is enabled. I'm on 10.04 with Intel GMA 4500M graphics. I would say about 30% of the time when I boot up the computer, I have no window borders. I use the Compiz Fusion icon just for this purpose, to reload the window manager and get back the window borders.Of course, the other 70% of the time the computer boots up with normal window borders. Is there a more permanent solution someone can provide than manually reloading the window manager on an as-needed basis?
View 2 Replies View RelatedI run Natty 64x (new install) and have setup to use two seperate x servers and no xinerama. When I start my computer everything seems fine on both monitors but once desktop is loaded and I start an app in the second monitor, I can't type anything and the window borders are missing. If I type "DISPLAY:=0.1 metacity" the problem gets fixed but I get an error that a window manager is running already.
I have AMD/Nvidia, GeForce 8800GT.
How do I change the size of the window borders in Openbox. I find great difficulty in getting my pointer to 'catch' the window border to resize the window.
View 5 Replies View Relatedcan we port the window buttons on top panel (when in maximized mode) while using global menu applet ? it will be similar to using unity (sans the ugly left panel)
View 8 Replies View RelatedI recently did a fresh reinstall of opensuse 11.2 kde. After I installed it I updated the computer. However, when I returned to my computer after the update, I found the window borders to be missing and that I couldn't do anything with the desktop. I restarted, and lo and behold! I had KDE 4.4! Except I didn't want to install it. I perfectly like kde 4.3, and would probably prefer to move back to it until kde 4.4 becomes stable. Why did this happen? Had opensuse moved on to kde 4.4 already? Is there a way to get KDE 4.3 without reinstalling?
View 7 Replies View RelatedI had installed compiz and emerald when I was using Fedora 9, upgraded to 10 (compiz and emerald still working at this stage) tho when I upgraded to 11 compiz and emerald seem to have crashed (i upgraded using preupgrade both times, maybe this might be a bit of a problem...) Since upgrading to 11, neither compiz or emerald would work. Ive tried reinstalling both compiz and emerald, and even erasing them both, restarting and then installing (both times thru yum).
This has brought back compiz and the effects (I can use AWN, desktops on a cube etc) but there is no window borders (cant move, resize etc). Ive tried different window managers (emerald, gtk and even kde4 has been installed..) and tried reloading the window mangers thru the fusion icon. Nothing seems to work, unless I stop compiz from running at startup (but then I lose all the desktop 'candy'). Searching the net has brought up a couple of options (Under CCSM):
- Check the box "Windows Decorations" and under its properties write emerald --replace (or whatever WM)
- Check the box "Place windows"
but none of these seem to work either.
I've been using Slackware for about five years but I've never been bothered about compiz so it's all a bit new to me. Since I installed Slackware 13 (64bit) yesterday I noticed that compiz is one of the pre-installed packages so I thought I'd give it a blast.
I should probably have done a bit more research but I read on a forum that running "compiz --replace" will replace the default window manager with compiz so I gave it a try. The problem is that now none of my windows have borders so I can't move them or do anything. The worst part about the whole affair is that I can't even figure out how to revert to whatever the old window manager was.
EDIT : Just thought I'd add that I'm using XFCE.
EDIT++ : I've managed to revert the window manager by deleting my .cache directory. XFCE obviously maintainted the apps that were running and one of them was compiz. Now just to figure out how I can get compiz working. I presume emerald is the key...
I've been researching on how to fully decorate the window borders and toolbars but I can't seem to get a clear as day answer. The threads I've found that have plenty of information are quite old (usually 2006), and others lead to things I already had tested with, such as Gnome Color Chooser. GCC was very nice, but it didn't really do everything I wanted. For one, I could only change the colors of the Main Menu, but not other menus such as the menus within Firefox (those are still grey with white letters and an orange highlight when hovering). It also wouldn't change the colors for the factory clock in the taskbar without messing up a bunch of other things. The list goes on.
What's even more confusing and the reason why I haven't begun is the following. Some people mention GTK+2, others Metacity, and others COmpiz and others Emerald. I know what COmpiz and Emerald are, but I don't understand how they're related (or unrelated) to the other 2 terms. Some threads mention how Emerald offers better functions than the rest, others just talk about editing Metacity themes. In short, I'm completely lost in the terminology. I do understand that the editing to get the exact look I want has to be done by hand, and I'm willing to do that. It's a bit pointless though if I'm stuck with the terminology I've mentioned. I want to know which themes I can search and be able to edit them to the looks I want.
I've recently upgraded to gnome shell in experimental, and I like it so far. However, the window borders and themes look like how Gnome 2 did before you install gtk2-engines and some themes. Are there any themes in the repositories that I'm missing, or are they just not there yet?
View 2 Replies View RelatedI find xcompmgr more than adequate for making a desktop look pretty modern, and I don't like the more extravagentCompiz gimmicks - but there is one thing that irritates when using xcompmgr which someone here might have worked round.
Rounded window borders don't draw and redraw properly when using the Terminal (gnome-terminal and the LXDE and Xfce ones) or system monitor and moving them from their default place. You get this little white botch at the corners. I'm not massively technical and I'm ambivalent about how much more I want to learn as I have plenty of creative outlets already, but I would like to solve this. Somehow xcompmgr is treating these programs as a different class? It's capable of drawing the window borders properly as it is just these two programs that get botched. Possibly this doesn't get noticed as maybe people usually use xcompmgr with openbox and LXDE and their square window borders. I did do a search but there was nothing matching what I saw.
I was wondering if it's possible to remove the triangular resize window button from the bottom-right corner of a particular window (or all windows, doesn't matter). I recently made it so that I have a transparent terminal (with no title bar, borders, etc.) docked onto my desktop, but the one thing I can't get rid of is the ugly-looking resize button hanging out by itself in the middle of the screen.
View 3 Replies View Relatedwhat i did was, remove evolution mail from synaptic, what i wanted to do was just remove the indicator applet from the task bar. i read a bunch of bad stuff about removing evolution from synaptic vs just removing the applet.
im worried. did i break anything or put my security at risk. after, i used a command (older) (sudo apt-get install ubuntu-desktop)to install ubuntu desktop. because i thought that it would fix evolution. then i went to synaptic and installed a package called evolution. i rechecked evolution in applications menu. however, i notice that i have both a checkable evolution and two evolution icons. nothing 'seems' broken. im not sure if it ever was. and evolution calender pops up as normal, as does the the installed plain evolution. they both seems to be an exact copy of the other.
all i really wanted to do was remove the indicator applet. did i make a serious mistake. since ive had ubuntu, ive reformatted a lot because i was worried i made a mistake of some kind. however now im into the more "make a mistake and fix it stage' as im pretty happy with my current desktop and have worked hard to customize it. the command, sudo apt-get remove indicator-messages removed the mail icon. i still am worried that i broke something, or put my security at risk. also, now i have two mail icons. evolution mail and calendar, and another just called evolution.
I know a bunch of commands and I am comfortable using the terminal, I even set a powerpc server but I can't figure out how to remove epiphany on this new computer I'm setting up. I didn't install anything with tasksel. I installed gnome and xorg afterwards... I load it up and 'startx' just fine. then I check around for the programs that were installed. I lik'em gimp, lot's of utilities. gedit. anyway I find epiphany, which I have already established that I dislike, I immediately go to the root terminal (another nice program that comes with gnome) and type apt-get remove epiphany-browser-data the output says it will be deleting gnome... however I have researched and found these are simpy meta packages that don't really matter.... however under the section that states all the packages that will be removed by autoremove there is a huge list... I doubt these packages are safe to remove. how to remove epiphany without removing a huge amount of probably needed software
View 14 Replies View RelatedThese should be my last pleas for help with regard to Fedora 13. I've been unable to turn off the notifications that appear in the top right corner, despite a decent amount of searching on google. I can't remove any notifications package without removing a bunch of important software along with it. Also, F13 refuses to "Safely Remove" either of my external disks. I have to yank out the usb cord, touching wood each time.
View 5 Replies View RelatedI installed ubuntu 10.04 and after installing the drivers for my graphic card ATI Mobility Radeon HD4570, windows borders do not appear anymore. When I type "metacity --replace" borders come back, but I can't use compiz, also when I try to disable "Window Decoration" from the compizConfig Settings it doesn't work, it keeps always enabled. I tried this hack here [URL] but it didn't work for me (or I didn't apply it correctly, I'm new to the system).
View 6 Replies View Relatedi don't know if it's a bug or not but when i use the Elementary or Equinox theme, i have little borders at left and right of nautilus (see the screenshot)... i don't have this with the official theme ! Did you have the same problem with these themes, or other, on Lucid
View 4 Replies View RelatedRandomly my windows borders are either there are not, whats up with this? Its makin things a bit difficult minimizing windows switching windows etc, it doesnt happen all the time, just every other time i boot up, but its happened twice in a row now. And when it doesnt do it sometimes the borders close, minimize and expand boxes just disspear along with the title at the top i.e Firefox [URL]
View 9 Replies View RelatedI have an issue with my ATI 5800 card. Installation was flawless (dual boot with Windows 7 64 bit with all updates installed. Upon reboot, I have a black border around the entire Desktop. My screen resolution is set to maximum.Being new to all this, I am somewhat perplexed how the ATI Catalyst Control Center works.In Windows 7, this is the Scaling Option in the Catalyst Control Center which can easily rectify the situation. I have verified that the Catalyst Control Center is installed but I have no idea how to proceed to fix this.I have been searching Google for two days with no luck - lots of suggestions, but no fix. Can someone point me in the right direction as I would like to learn and understand how to use this OS.
View 7 Replies View RelatedI searched for an answer to this problem for two days now, and only after I asked in #ubuntu (which I almost never do because it's so busy that my question is instantly upscrolled) did I find out the simple and undocumented solution. So I'm posting this for posterity and anyone who might make the same dumb mistake I did.
The problem I experienced was a disappearance of gnome borders from rdesktop through tsclient which had severe consequences on my ability to access remote computers.
Example image: [url]
As you can see there are no gnome borders to that paint window (via rdp) and the problem persists even in different resolutions. When in full screen mode, it is impossible to ctrl+alt+enter (or alt+tab, alt+esc, etc., I tried everything) out of the rdp session, it just blinks and stays in the window. I had to start>logout>disconnect just to get back to ubuntu. The only solution that ubuntu-pros offer is to turn off compiz, which I do not have nor have had on my machine. The sticky in this subforum explains:
Quote:
Where did my window borders go? - cc7gir
This is a common mistake caused by disabling some plugins in CompizConfig Settings Manager. To fix, open the manager (System > Preferences > CompizConfig Settings Manager) and find the "Window Decorations" plugin. Check the box and you're all set.
Fortunately, the mention of window decoration reminded me of some recent setting I came across. A few minutes of serious brain-scouring led me to the tsclient performance tab with a big fat check on "Hide window manager's decorations." I checked it two days ago thinking it would remove weird glowy-ness or whatever from the remote OS, allowing for faster communication and less lag; unknowingly, it just removes gnome's border from the window and ruins your whole remote access experience. I just unchecked it and connected, boom problem fixed.
I just installed ubuntu 10.10 on my notebook, and I had a problem with compiz, it loses the windows borders, when i excecute
Code:
compiz --replace
i get this output
Code:
Starting gtk-window-decorator
compiz: symbol lookup error: /usr/lib/compiz/libdecoration.so: undefined symbol: decor_property_to_quads
I really hate having a title bar so I went into CCSM and under effects-->Window Decorations found the decorations rule and set to none....
Works great, have new key short cuts for everything I need...
However, I do need the window borders back...
can't find any compiz code anywhere....wiki was worthless..
I have recently upgraded to 11.04 and everything works except for compiz and emerald, every time I enable compiz to be the window manager the borders either do not work or they do not appear. I switched the window manager to metacity and now the borders work but I can not get any effects at all. Also emerald never replaced the window borders either.
View 5 Replies View Relatedmachine: kubuntu 11.04x64 w/ kde4 the top terminal is of Yakuake w/ "No Border" option already enabled the bottom is of Konsole w/ "No Border" option also enabled how do I remove all borders from Yakuake to make it resemble Konsole at the bottom so as only the transparent terminal portion is visible?
if not possible what is a better replacement to Yakuake that has true no border settings, as well allows drag/drop of texts into the terminal? Already tried Tilda but it doesn't allow you to drag and drop texts into the terminal; tried Guake but can't get it to work in Kubuntu.