can we port the window buttons on top panel (when in maximized mode) while using global menu applet ? it will be similar to using unity (sans the ugly left panel)
View 8 RepliesI upgraded to 10.04 but problems started very quickly: I can see my desktop but when I start an application, there are no window borders or buttons to close/minimize that application! They just vanished. Also, opened windows don't appear on the taskbar, so I can't switch between windows, not even with ALT + TAB. The mouse isn't an arrow anymore, but a dark cross :s
Some specifications: Dell vostro 1000, ATI Radeon IGP Xpress 1150 (128mb shared), AMD64 Turion Here is what I did during the upgrade: everything default, except for once, when it asked me what to do with menu.lst (keep the old one or replace it with the newer version) I chose "replace" (default was to keep the old one). Can that be the reason?
Window buttons in the Fluxbox panel have dynamic width depending on the open windows' amount. Is it possible to make their width like in Gnome so that the buttons will have maximum width (but no minimum)?
View 1 Replies View RelatedI'm posting this for a new member who needs help, his registration hasn't gone through yet. His computer (10.04) a fresh install not 3 weeks old, has now had all his windows loose their outer borders and the 3 close, minimize, and maximize buttons. Clicking on one underneath another does not allow any other ones to focus- only the top window, Firefox, remains in focus. None of the windows are movable. I've used force quit to close windows. New windows open the same way- with no outer border, now locked to the upper left corner, and still unmovable.
Things that were open and close with force quit are still in the panel bars, and the panel bars are showing up like they are focused on. I've never seen this problem before in 10.04 or even 8.04. Has anyone else run into this, know how to fix it?
I recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies View RelatedSometimes when I boot up and log in, I have no window borders. The entire area with min/max/close is just gone. If I log out and back in, most times it comes back. What gives?
View 5 Replies View RelatedI'm running Ubuntu 10.04, and it's been flawless until tonight where, after an update, the normal window borders stopped working and were replaced by these ugly never-seen-before borders. I can get the borders back, but it'll kill compiz, but if I have compiz, then I have the ugly weird boarders
View 2 Replies View RelatedWhen i first started with ubuntu i added a blue border that appears on all my windows and my panel and have been trying to remove it for ages but have no idea how i added it, i assumed it was in the appearance tab, but changing window borders in theme->customise has no effect.
View 9 Replies View RelatedHow do I move the Window control buttons when the window is in full screen mode? I.e.: I know how to go into gconf-editor:
Code:
gconf-editor --> apps --> metacity --> general --> button layout = ":minimize,maximize,close"
(I've intentionally disabled the menu...)
What I want is my window controls to be on the right side of the window when the window is in full screen mode.
Also I've had an issue with the Unity dockbar glitching out. I can still click on the buttons (i.e. the logout button) but it displays like a nintendo game inserted crooked. Is there a way to 'restart' unity without log out/ log in?
Any one else experienced any glitches with unity auto hiding/showing?
I've just had enough of Enlightenment e16, so I uninstalled it. Now my window borders have disappeared and I can only input to one window - the first one I opened. If I want to input to another, I have to close the first one. I thought maybe gdm wasn't running (I'm using GNOME), but this is the output of ps -A | grep dm:
Code:
gdm-binary
gdm-simple-slav
gdm-session-wor
There has to be an easy way to change window border width (pixels). Not sure how mine got so wide but I have looked in Appearance, Compiz, Emerald Themes, etc and I can't figure it out! I am using Ubuntu Jaunty and have searched high and low. I think it's gnome but I'm confused about windowing environments. Found some ideas (tried them all - all seemed reasonable (such as holding ALT while mousing, etc). So far no luck.
View 3 Replies View RelatedWe've all probably had this issue at one time or another.Window borders disappearing when Compiz is enabled. I'm on 10.04 with Intel GMA 4500M graphics. I would say about 30% of the time when I boot up the computer, I have no window borders. I use the Compiz Fusion icon just for this purpose, to reload the window manager and get back the window borders.Of course, the other 70% of the time the computer boots up with normal window borders. Is there a more permanent solution someone can provide than manually reloading the window manager on an as-needed basis?
View 2 Replies View RelatedI run Natty 64x (new install) and have setup to use two seperate x servers and no xinerama. When I start my computer everything seems fine on both monitors but once desktop is loaded and I start an app in the second monitor, I can't type anything and the window borders are missing. If I type "DISPLAY:=0.1 metacity" the problem gets fixed but I get an error that a window manager is running already.
I have AMD/Nvidia, GeForce 8800GT.
How do I change the size of the window borders in Openbox. I find great difficulty in getting my pointer to 'catch' the window border to resize the window.
View 5 Replies View RelatedI recently did a fresh reinstall of opensuse 11.2 kde. After I installed it I updated the computer. However, when I returned to my computer after the update, I found the window borders to be missing and that I couldn't do anything with the desktop. I restarted, and lo and behold! I had KDE 4.4! Except I didn't want to install it. I perfectly like kde 4.3, and would probably prefer to move back to it until kde 4.4 becomes stable. Why did this happen? Had opensuse moved on to kde 4.4 already? Is there a way to get KDE 4.3 without reinstalling?
View 7 Replies View RelatedI had installed compiz and emerald when I was using Fedora 9, upgraded to 10 (compiz and emerald still working at this stage) tho when I upgraded to 11 compiz and emerald seem to have crashed (i upgraded using preupgrade both times, maybe this might be a bit of a problem...) Since upgrading to 11, neither compiz or emerald would work. Ive tried reinstalling both compiz and emerald, and even erasing them both, restarting and then installing (both times thru yum).
This has brought back compiz and the effects (I can use AWN, desktops on a cube etc) but there is no window borders (cant move, resize etc). Ive tried different window managers (emerald, gtk and even kde4 has been installed..) and tried reloading the window mangers thru the fusion icon. Nothing seems to work, unless I stop compiz from running at startup (but then I lose all the desktop 'candy'). Searching the net has brought up a couple of options (Under CCSM):
- Check the box "Windows Decorations" and under its properties write emerald --replace (or whatever WM)
- Check the box "Place windows"
but none of these seem to work either.
I've been using Slackware for about five years but I've never been bothered about compiz so it's all a bit new to me. Since I installed Slackware 13 (64bit) yesterday I noticed that compiz is one of the pre-installed packages so I thought I'd give it a blast.
I should probably have done a bit more research but I read on a forum that running "compiz --replace" will replace the default window manager with compiz so I gave it a try. The problem is that now none of my windows have borders so I can't move them or do anything. The worst part about the whole affair is that I can't even figure out how to revert to whatever the old window manager was.
EDIT : Just thought I'd add that I'm using XFCE.
EDIT++ : I've managed to revert the window manager by deleting my .cache directory. XFCE obviously maintainted the apps that were running and one of them was compiz. Now just to figure out how I can get compiz working. I presume emerald is the key...
I've been researching on how to fully decorate the window borders and toolbars but I can't seem to get a clear as day answer. The threads I've found that have plenty of information are quite old (usually 2006), and others lead to things I already had tested with, such as Gnome Color Chooser. GCC was very nice, but it didn't really do everything I wanted. For one, I could only change the colors of the Main Menu, but not other menus such as the menus within Firefox (those are still grey with white letters and an orange highlight when hovering). It also wouldn't change the colors for the factory clock in the taskbar without messing up a bunch of other things. The list goes on.
What's even more confusing and the reason why I haven't begun is the following. Some people mention GTK+2, others Metacity, and others COmpiz and others Emerald. I know what COmpiz and Emerald are, but I don't understand how they're related (or unrelated) to the other 2 terms. Some threads mention how Emerald offers better functions than the rest, others just talk about editing Metacity themes. In short, I'm completely lost in the terminology. I do understand that the editing to get the exact look I want has to be done by hand, and I'm willing to do that. It's a bit pointless though if I'm stuck with the terminology I've mentioned. I want to know which themes I can search and be able to edit them to the looks I want.
I've recently upgraded to gnome shell in experimental, and I like it so far. However, the window borders and themes look like how Gnome 2 did before you install gtk2-engines and some themes. Are there any themes in the repositories that I'm missing, or are they just not there yet?
View 2 Replies View RelatedI deleted (by accident) the top panel in my Ubuntu 10.04 install. I got it back but I can't get the power button or the chat/user-name button back.
How would you get these things back on the panel?
I am current updated with latest version of 10.04.It has been running fine for several days with the new update.Today, I notice the applications did not show up on the Panel bar at bottom of screen.When I have an application up, and I click the minimize button, the entire application disappear,So I have to start a new application each time if I minimize it.In addition, application does not show up on the Panel bar at all when the application is in-focus, out-of-focus, or minimized.
And when I minimized any application, it disappear entirely. Minimize does not work at this point.So my Panel shows up but is blank!I see several posting of disappearing Panel, but my Panel is NOT missing.How do I enable display of active applications in Panel bar?I also re-ran Update manager, but it said everything is up to date.
How to move the Windows control button ( Minimize, Maximize , Close) Buttons back to the conventional place; top right corner of the screen ?I can't imagine why they have changed the place of this button from the conventional place.
View 9 Replies View RelatedI have noticed that,in Ubuntu 10.10 Maverick Meerkat,the windows have their 3 buttons[maximize(a square),close(x) and minimize(-)] at the left(like in MacOS),while in earlier Ubuntu versions(for example,8.04 Hardy Heron),these buttons are at the right(like in the Windows operating system).Why did the developers of Ubuntu do this change?
View 6 Replies View RelatedI've had this problem before in Ubuntu but I don't remember how I fixed it. I have buttons for the open applications on the bottom panel. If I move from one to the other with the mouse, the button highlight doesn't follow. I have to go out of the panel and back in to a different button. I removed and reinstalled the applet to no effect.
View 2 Replies View RelatedAccidentally I removed applications buttons from lower panel. How to restore them?
View 10 Replies View Relatedthis happened after i installed calm anti-virus.before the sequence of panel button was at the to the very left it used to be button for logging off or shut-down then it was the calendar and clock. then network manager and then the sound preference button.but somehow they do not load in same sequence they appear randomly in any sequence.
View 5 Replies View RelatedI installed 11.04 64 bit on my Acer Extensa 4420 the other day. It was running 10.04 32bit before. When it booted up the first time it said that it had some video issue and would boot in classic mode. I rebooted and selected the regular Ubuntu and it came up with the side panel buttons. This morning it boots into classic mode and I can't seem to get it back to the regular mode with the side panel buttons! What could be wrong with video settings? When I first ran 11.04 live it came up with the side panel and didn't ask to install any video drivers.
View 3 Replies View RelatedI don't like the window controls switch from right to left...made in 10.04. Easy script to move the buttons here. [URL]
View 9 Replies View Relatedmy window buttons are at the left corner, it works but i love it more when they are in the right corner. So what i must do to change the position to the right corner?
View 6 Replies View RelatedI can put them on the right using gconf-editor. But every time I change theme, it goes back to the left. It's annoying. Is there a way to fix them permanently to the right?
View 6 Replies View Related