Software :: No Window Borders With Compiz XFCE On Slackware 13?
Sep 6, 2009
I've been using Slackware for about five years but I've never been bothered about compiz so it's all a bit new to me. Since I installed Slackware 13 (64bit) yesterday I noticed that compiz is one of the pre-installed packages so I thought I'd give it a blast.
I should probably have done a bit more research but I read on a forum that running "compiz --replace" will replace the default window manager with compiz so I gave it a try. The problem is that now none of my windows have borders so I can't move them or do anything. The worst part about the whole affair is that I can't even figure out how to revert to whatever the old window manager was.
EDIT : Just thought I'd add that I'm using XFCE.
EDIT++ : I've managed to revert the window manager by deleting my .cache directory. XFCE obviously maintainted the apps that were running and one of them was compiz. Now just to figure out how I can get compiz working. I presume emerald is the key...
View 2 Replies
ADVERTISEMENT
Apr 23, 2010
I recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies
View Related
Jun 28, 2010
We've all probably had this issue at one time or another.Window borders disappearing when Compiz is enabled. I'm on 10.04 with Intel GMA 4500M graphics. I would say about 30% of the time when I boot up the computer, I have no window borders. I use the Compiz Fusion icon just for this purpose, to reload the window manager and get back the window borders.Of course, the other 70% of the time the computer boots up with normal window borders. Is there a more permanent solution someone can provide than manually reloading the window manager on an as-needed basis?
View 2 Replies
View Related
Jun 22, 2009
I had installed compiz and emerald when I was using Fedora 9, upgraded to 10 (compiz and emerald still working at this stage) tho when I upgraded to 11 compiz and emerald seem to have crashed (i upgraded using preupgrade both times, maybe this might be a bit of a problem...) Since upgrading to 11, neither compiz or emerald would work. Ive tried reinstalling both compiz and emerald, and even erasing them both, restarting and then installing (both times thru yum).
This has brought back compiz and the effects (I can use AWN, desktops on a cube etc) but there is no window borders (cant move, resize etc). Ive tried different window managers (emerald, gtk and even kde4 has been installed..) and tried reloading the window mangers thru the fusion icon. Nothing seems to work, unless I stop compiz from running at startup (but then I lose all the desktop 'candy'). Searching the net has brought up a couple of options (Under CCSM):
- Check the box "Windows Decorations" and under its properties write emerald --replace (or whatever WM)
- Check the box "Place windows"
but none of these seem to work either.
View 4 Replies
View Related
Aug 26, 2011
I find xcompmgr more than adequate for making a desktop look pretty modern, and I don't like the more extravagentCompiz gimmicks - but there is one thing that irritates when using xcompmgr which someone here might have worked round.
Rounded window borders don't draw and redraw properly when using the Terminal (gnome-terminal and the LXDE and Xfce ones) or system monitor and moving them from their default place. You get this little white botch at the corners. I'm not massively technical and I'm ambivalent about how much more I want to learn as I have plenty of creative outlets already, but I would like to solve this. Somehow xcompmgr is treating these programs as a different class? It's capable of drawing the window borders properly as it is just these two programs that get botched. Possibly this doesn't get noticed as maybe people usually use xcompmgr with openbox and LXDE and their square window borders. I did do a search but there was nothing matching what I saw.
View 3 Replies
View Related
Mar 19, 2010
Anybody got compiz in xfce working or have some apps, widgets, themes or other fun stuff to share? Like a netbook spin/remix and or a slackware edition.
View 6 Replies
View Related
May 11, 2011
When starting Xfce, there's a ~50% chance that the theme (no matter which one) doesn't work properly and all the window frames are black. Sometimes it does work, but I can't reproduce either - it's random.
I've had this problem before on 13.1 and somehow managed to make it disappear (I switched from KDE and blamed it on me not getting all the settings right immediately). However, after installing 13.37 and starting with a clean homedir, it happens more often that it did on 13.1 and I just can't get rid of it.
PS: The whole Slackware / X11 / Xfce setup is fairly generic, but I do use the binary Nvidia driver from SBo and I have two TFTs configured as separate X11 screens.
View 2 Replies
View Related
Jun 9, 2010
I often swapped window managers between fluxbox kde and gnome back when I ran ubuntu to suit my needs. When I installed slackware, I picked KDE because of the convenient app suite. I don't wish to uninstall kde but I'd like to be able to pick which environment I use when I swap to a GUI. Something like a flag, startx --fluxbox.
View 2 Replies
View Related
Jan 13, 2011
i found this http://crunchbanglinux.org/forums/to...indow-manager/ it has screenshots of exactly what i'm looking for, but i cant actually get it to work when following their instructions. i create the fusion.desktop file and the start-fusion.sh file, but they do not show up in xwmconfig or KDM. is there something in particular for slackware that i have to do to add the .desktop entry to my list of sessions?
View 4 Replies
View Related
Apr 17, 2010
I installed ubuntu 10.04 and after installing the drivers for my graphic card ATI Mobility Radeon HD4570, windows borders do not appear anymore. When I type "metacity --replace" borders come back, but I can't use compiz, also when I try to disable "Window Decoration" from the compizConfig Settings it doesn't work, it keeps always enabled. I tried this hack here [URL] but it didn't work for me (or I didn't apply it correctly, I'm new to the system).
View 6 Replies
View Related
Mar 13, 2010
I'm hoping that this is a stupid question with a very simple answer that I just can't find.I've been playing around with compiz-fusion on -current64. When I have two windows open, if I close the top, active window, I would expect that the next window in the stack would receive the focus. However, it does not. I have to alt-tab to it or click it with the mouse.
View 3 Replies
View Related
Oct 11, 2010
I just installed ubuntu 10.10 on my notebook, and I had a problem with compiz, it loses the windows borders, when i excecute
Code:
compiz --replace
i get this output
Code:
Starting gtk-window-decorator
compiz: symbol lookup error: /usr/lib/compiz/libdecoration.so: undefined symbol: decor_property_to_quads
View 9 Replies
View Related
Dec 17, 2010
I really hate having a title bar so I went into CCSM and under effects-->Window Decorations found the decorations rule and set to none....
Works great, have new key short cuts for everything I need...
However, I do need the window borders back...
can't find any compiz code anywhere....wiki was worthless..
View 2 Replies
View Related
May 1, 2011
I have recently upgraded to 11.04 and everything works except for compiz and emerald, every time I enable compiz to be the window manager the borders either do not work or they do not appear. I switched the window manager to metacity and now the borders work but I can not get any effects at all. Also emerald never replaced the window borders either.
View 5 Replies
View Related
Jul 7, 2010
Sometimes when I boot up and log in, I have no window borders. The entire area with min/max/close is just gone. If I log out and back in, most times it comes back. What gives?
View 5 Replies
View Related
Apr 9, 2010
I'm running Ubuntu 10.04, and it's been flawless until tonight where, after an update, the normal window borders stopped working and were replaced by these ugly never-seen-before borders. I can get the borders back, but it'll kill compiz, but if I have compiz, then I have the ugly weird boarders
View 2 Replies
View Related
Jun 30, 2010
When i first started with ubuntu i added a blue border that appears on all my windows and my panel and have been trying to remove it for ages but have no idea how i added it, i assumed it was in the appearance tab, but changing window borders in theme->customise has no effect.
View 9 Replies
View Related
Sep 28, 2010
I've just had enough of Enlightenment e16, so I uninstalled it. Now my window borders have disappeared and I can only input to one window - the first one I opened. If I want to input to another, I have to close the first one. I thought maybe gdm wasn't running (I'm using GNOME), but this is the output of ps -A | grep dm:
Code:
gdm-binary
gdm-simple-slav
gdm-session-wor
View 1 Replies
View Related
Aug 16, 2009
There has to be an easy way to change window border width (pixels). Not sure how mine got so wide but I have looked in Appearance, Compiz, Emerald Themes, etc and I can't figure it out! I am using Ubuntu Jaunty and have searched high and low. I think it's gnome but I'm confused about windowing environments. Found some ideas (tried them all - all seemed reasonable (such as holding ALT while mousing, etc). So far no luck.
View 3 Replies
View Related
Jan 27, 2010
I recently did a fresh reinstall of opensuse 11.2 kde. After I installed it I updated the computer. However, when I returned to my computer after the update, I found the window borders to be missing and that I couldn't do anything with the desktop. I restarted, and lo and behold! I had KDE 4.4! Except I didn't want to install it. I perfectly like kde 4.3, and would probably prefer to move back to it until kde 4.4 becomes stable. Why did this happen? Had opensuse moved on to kde 4.4 already? Is there a way to get KDE 4.3 without reinstalling?
View 7 Replies
View Related
May 3, 2010
I upgraded to 10.04 but problems started very quickly: I can see my desktop but when I start an application, there are no window borders or buttons to close/minimize that application! They just vanished. Also, opened windows don't appear on the taskbar, so I can't switch between windows, not even with ALT + TAB. The mouse isn't an arrow anymore, but a dark cross :s
Some specifications: Dell vostro 1000, ATI Radeon IGP Xpress 1150 (128mb shared), AMD64 Turion Here is what I did during the upgrade: everything default, except for once, when it asked me what to do with menu.lst (keep the old one or replace it with the newer version) I chose "replace" (default was to keep the old one). Can that be the reason?
View 9 Replies
View Related
Jun 11, 2011
I run Natty 64x (new install) and have setup to use two seperate x servers and no xinerama. When I start my computer everything seems fine on both monitors but once desktop is loaded and I start an app in the second monitor, I can't type anything and the window borders are missing. If I type "DISPLAY:=0.1 metacity" the problem gets fixed but I get an error that a window manager is running already.
I have AMD/Nvidia, GeForce 8800GT.
View 5 Replies
View Related
Feb 7, 2010
How do I change the size of the window borders in Openbox. I find great difficulty in getting my pointer to 'catch' the window border to resize the window.
View 5 Replies
View Related
Apr 1, 2011
I've recently upgraded to gnome shell in experimental, and I like it so far. However, the window borders and themes look like how Gnome 2 did before you install gtk2-engines and some themes. Are there any themes in the repositories that I'm missing, or are they just not there yet?
View 2 Replies
View Related
Jan 11, 2011
can we port the window buttons on top panel (when in maximized mode) while using global menu applet ? it will be similar to using unity (sans the ugly left panel)
View 8 Replies
View Related
Mar 31, 2011
I've been researching on how to fully decorate the window borders and toolbars but I can't seem to get a clear as day answer. The threads I've found that have plenty of information are quite old (usually 2006), and others lead to things I already had tested with, such as Gnome Color Chooser. GCC was very nice, but it didn't really do everything I wanted. For one, I could only change the colors of the Main Menu, but not other menus such as the menus within Firefox (those are still grey with white letters and an orange highlight when hovering). It also wouldn't change the colors for the factory clock in the taskbar without messing up a bunch of other things. The list goes on.
What's even more confusing and the reason why I haven't begun is the following. Some people mention GTK+2, others Metacity, and others COmpiz and others Emerald. I know what COmpiz and Emerald are, but I don't understand how they're related (or unrelated) to the other 2 terms. Some threads mention how Emerald offers better functions than the rest, others just talk about editing Metacity themes. In short, I'm completely lost in the terminology. I do understand that the editing to get the exact look I want has to be done by hand, and I'm willing to do that. It's a bit pointless though if I'm stuck with the terminology I've mentioned. I want to know which themes I can search and be able to edit them to the looks I want.
View 9 Replies
View Related
Jan 17, 2010
Is there some way top stop the "blind effect" of compiz so that when you double click the top title bar of a window that it maximizes the window instead of the rolling up type effect? Also when i place my mouse on the top right of the screen it brings it to a choosing window type mode where you can pick which window you would like to open, is it possible to get this on the top left of the screen instead? Lastly when I use Kdebluetooth4 to send a file to my computer where does that file save to?
View 2 Replies
View Related
May 13, 2010
Some of my applications use different window types for pull-down menus than what compiz window animation think. This means that I get normal open window animation on these pull-down menus instead of the menu-theme. Inside the CompizConfig you can specify exactly which window types the different animations apply to, and you can use "grab" to probe your window for this info. My problem is that I can't "grab" the info for the pull-down, since it leaves "grab" mode once I try to open the menu (and grabs the info for the parent window instead of the menu). How do I get to know the window properties of the pull-downs, so that I can map them to the relevant window animation theme?
View 5 Replies
View Related
Aug 22, 2010
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies
View Related
Jan 25, 2011
I was over in the Desktop forum yesterday and apparently 'event sounds' are available for Xfce and are part of the original package, but I've never seen them made available, that is, the switch to turn them on isn't where it is suppose to be, in any Slackware specific package of Xfce.I've used 4.61 that came with Slackware64 13.1, 4.61 from the Salix depository, 4.62 from Mr. Workman, 4.62 from 'current' and recently 4.8 from Mr. Workman. None of these make the 'event sounds' available.
View 3 Replies
View Related
