I installed Ubuntu to use ddrescue to clone my dying drive and keep the log.Now the question is:Does Ubuntu really try to repair a corrupt NTFS disk during boot?If so, how can I change this behaviour, including any disks attached to the system in future?I had a similar question for the live cd, I think it should be easier now, as we can configure the system.Btw am I the only one to think an 'auto repair' by default is no good without asking for permission? It's something I dislike on Windows. A corrupt structure is likely a hardware problem, and in this case a repair can terribly damage the file system.
I downloaded ubuntu 10.10 iso, made CD, installed as dual-boot with win Vista home premium and used it for a week to access the 'net and email. Yesterday, while deleting an email, the "d" key stuck down while I was issuing <CTRL>D and the cursor froze. I then rebooted by using the reset button and saw many lines of text including "kernel panic". so I reset and booted into 'repair boot'. Again, many lines of text which stop at the same place if I try this twice.
I assume I've fried my ubuntu install and would like to fix or re-install it. When I installed it, I let the [wubi?] installer make decisions except choice of drive because it picked the external, USB drive. It appears to've used about 80 G on internal drive D: I could boot from the distro CD and see if it will re-install but I'm concerned that I may not fix my problem or that it may mess up my windows installation.
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
i know i asked earlier but i got my usb to be mounted on a different fedora distro. how do i now find my documents or repair it? also how do i add in a repair line if possible?
I have hard disk contain Windows 7 and Ubuntu 11 so I cloned it to new one but when I replaced it no OS working just dell mark appearing then restart by itself. In the past started up by Ubuntu menu to select Windows or Ubuntu so now how can I fix Ubuntu boot to avoid reinstall everything.
I need to boot in WXP just because the guys at the company don't want to update for Linux drivers in the TS so I can't connect from home unless I do it in Windows XP. But today WXP refuses to boot, when the progress bar appears, the system boots automatically. The WXP CD doesn't help, the repair console doesn't let me run chkdsk or anything (dir C: gives an error about listing addresses or something like that). Is there any way to use fsck or anything in Linux to repair the WXP NTFS partition?
I just now re-installed 10.04 on my box, but now I can't get back into Windows. I'm getting the BOOTMGR not found error, that I'm familiar with, but the circumstances surrounding it are completely new to me. In the past I've encountered errors from hard-shutdowns where I couldn't mount the partition, until I checked it with windows first, but I can't boot into windows at all any more. I'm pretty sure my grub is pointing to the right location:
The boot sector somehow got messed up on a friends computer while updating. I used to know how to do it with the old version, but now that they've updated it and changed everything , how do you repair the boot sector from a live-CD with Grub 2?
I'm using Ubuntu Lucid and any sudden power loss will usually cause problems with the file system. When I bring the computer back up, Ubuntu will then scan for errors at boot-time and if any errors are found it prompts me to select whether to repair or ignore them. I would much rather have it select the repair option automatically so that I don't have to be physically present.The reason for this is that i have a web server that should come back online automatically after a power loss.
So I have been messing around with the new 10.04 and I managed to screw it up. When I started to log off, I closed the lid to my laptop so it would hibernate, but instead the screen went black and I could only see the cursor. It stayed like that for several minutes so I shut it down manually. When I booted it up again, it froze on the splash/loading screen and I haven't been able to boot it since. I've tried to boot in recovery mode, but I think my campus internet interferes with the downloading of the necessary files from the internet. Is there any way to boot a recovery mode from the install disc? Or am I SOL?
I was using the disk utility on Ubuntu 10.04 and wanted to make by 500GB external NTFS formatted USB drive into 1 x 50GB FAT32 and 1 x 450GB NTFS. I clicked the option that said format or create a partition and it basically wiped the whole thing in a split second leaving me with 500GB of seemingly empty space. Obviously the files are still there but I cannot boot the drive to view anything. I have downloaded testdisk, but don't know how to use it, but I am sure there is a relatively simple solution here. I am currently repairing the boot sector of the drive as Test Disk showed the drive as "no type" i.e. not FAT/NTFS/ext4 etc., but shows the correct amount of used space though, but I cannot view anything err go, I cannot use the undelete command as yet.
OK as a recent Windows to Ubuntu convert I made a stupid mistake and now would now like to recover my OS, particularly my files.I had happily been running Ubuntu 10.10 but then used Synaptic to remove Python 2.6 (I was having trouble running Python 2.5 with both installed), I selected to remove Python and all it's dependencies (a bad move as I realise now, as it was quite a dependency list in the end!).
I was left with a semi functional desktop, some things worked but many things were broken / unavailable, neither Synaptic or even Terminal would work to situation.I tried rebooting in the forlorn hope that I would get some recovery options, but it would not boot, boot starts, gets to grub (top left flashing cursor), then that disappears and I am presented with a black screen and nothing then happens. If I then do a hard power down the screen very briefly shows some text (something like enter password) as it shuts down.
Subsequent boot ups just do the same thing. If I boot with an installation disk and move forward to the partition step the original partition is shown as in tact.So, my main question is, is there a way of recovering my OS without the use of low level disk recovery utils (which may be a bit painful and long winded). e.g. what happens if I install 'over the top' of my original installation, will my file system be in tact
I initially had a dual boot where I could decide to either boot into Windows 7 or Ubuntu 10.04. It work seamlessly. At some point, however, when I booted into Windows, it just seem to only load it "half" in the sense that the desktop just turned black (but when ctrl-alt-del was hit I did receive a screen with the different options).
I suspected there was a problem with grub and proceeded to restore the Windows bootloader by booting into the Windows CD and repairing the computer by entering the commands:
After restarting I suddenly do not have the option to boot into Ubuntu (where did it go?) and booting automatically into Windows the original problem persists.
Any idea what happened here and how I can restore things?
The new GRUB2 was supposed to configure itself from the old grub, but got the kernel image partition wrong.I have booted from Knoppix live cd, but need to write to system files. I have searched, and found several suggestions that apparently work on Win machines, but RO permission for root on Linux is a harder nut to crack.
I have a bad entry in /etc/fstab I have tried to tried to change in boot but it says read only. It will not take su. I have a livecd but I can't seem to get to my filesystem from a terminal where I can specify su
as friend i am new in linux i install open suse and window 7 in dual boot .. every thing was fine but last week i got terrible virus attack at my win7 so i format as fat32 using yast partionerbut now i also delete first boot partion .. now i can't install window on it .. there is blue screen problem stuck the installation
I have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
I just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
I regularly use 2 monitors at 2 different locations. Booting Ubuntu on monitor 1 works great. Booting with monitor 2 connected causes Ubuntuto load with really low resolution.If Ubuntu is running and I unplug monitor 1 and connect monitor 2 all is well and it works perfectly.How can I tell Ubuntu not to check/change the display settings during boot so that it will work correctly with monitor 2?
One of my ubuntu 10.04 boxes starts apache2 server automatically at boot. I know from the output of the command:
Code:
sudo /etc/init.d/apache2 status
I can't remember even setting that up, and I don't think it does so by default, since my other box in fact does not even have apache2 server installed. I can stop the server once I login, but is there a way to stop it from automatically starting the server, or even better, completely uninstall the daemon. I tried
Code:
sudo apt-get remove apache2
but that does not work. I guess the daemon is part of some bigger package.
Has anyone tried encrypting the boot partition to prevent the kernel from being modified. Iv tried following this but I'm running into issues when building. [URL] Im using the source from bzr checkout [URL] Last time I tried I screwed grub and it wouldnt boot.
I edited /etc/fstab and after that the computer won't boot up. I got as far as (Repair filesystem) 32 #mount -w -o -remount / and it says already mounted or busy. I type (Repair filesystem) 32 #mount And it looks like all mount points are (rw) I try to edit /etc/fstab but when I save it I get told that the filesystem is READ ONLY.
How do I repair an external HDD's MBR from Ubuntu? I know there are tools for doing this kind of thing from Windows (such as MbrFix), but I want to know if there's anything to do it from Ubuntu.
I had been running ubuntu 9.03 for quite some time, but for school I needed windows, so after installing windows on a free'd partition, it will not give me the ubuntu boot option and loads staright into windows(vista)[typical windows]. I am aware that one is able to repair it with an ubuntu boot disk, but my dvd-rom isn't functioning.My question is, is it possible to repair it with a USB stick instead?
On startup I heard a 'click' around the time "loading hardware modules" and "loading kernel drivers" was showing on the monitor. Then all the system sounds became fuzzy (corrupted?). Other sounds, such as VLC playing a music station, are fine.
Don't know if I have a glitch or if I deleted something while dinkin' around. Anyway, I boot to the desktop and I have desktop icons but no panels at all. Alt+F2 does not work. I think CTRL+ALT+F2 gave me "run" window. "Sudo gnome-panel &" did nothing. "Init 1" gave me a "init 1" screen but I couldn't accomplish anything there for lack of know-how. Reinstalling is no big deal at all for me but I wish I could accomplish something geeky like a repair. I'm not sure of the process for using a live cd.
