as friend i am new in linux i install open suse and window 7 in dual boot .. every thing was fine but last week i got terrible virus attack at my win7 so i format as fat32 using yast partionerbut now i also delete first boot partion .. now i can't install window on it .. there is blue screen problem stuck the installation
View 1 Replies
I have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
View 8 Replies View Relatedhow to remove the linux opensuse which are dual boot with window ?
View 1 Replies View RelatedI initially had a dual boot where I could decide to either boot into Windows 7 or Ubuntu 10.04. It work seamlessly. At some point, however, when I booted into Windows, it just seem to only load it "half" in the sense that the desktop just turned black (but when ctrl-alt-del was hit I did receive a screen with the different options).
I suspected there was a problem with grub and proceeded to restore the Windows bootloader by booting into the Windows CD and repairing the computer by entering the commands:
After restarting I suddenly do not have the option to boot into Ubuntu (where did it go?) and booting automatically into Windows the original problem persists.
Any idea what happened here and how I can restore things?
I downloaded ubuntu 10.10 iso, made CD, installed as dual-boot with win Vista home premium and used it for a week to access the 'net and email. Yesterday, while deleting an email, the "d" key stuck down while I was issuing <CTRL>D and the cursor froze. I then rebooted by using the reset button and saw many lines of text including "kernel panic". so I reset and booted into 'repair boot'. Again, many lines of text which stop at the same place if I try this twice.
I assume I've fried my ubuntu install and would like to fix or re-install it. When I installed it, I let the [wubi?] installer make decisions except choice of drive because it picked the external, USB drive. It appears to've used about 80 G on internal drive D: I could boot from the distro CD and see if it will re-install but I'm concerned that I may not fix my problem or that it may mess up my windows installation.
I have a dual boot setup with XP & ubuntu 8.04 how do I remove XP & add Window 7
View 6 Replies View RelatedI just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
View 1 Replies View RelatedMy PC will not boot.I have tried to repair on the start up screen and by YaST with on success. sometimes it says device.map is wrong.
View 1 Replies View RelatedI have hard disk contain Windows 7 and Ubuntu 11 so I cloned it to new one but when I replaced it no OS working just dell mark appearing then restart by itself. In the past started up by Ubuntu menu to select Windows or Ubuntu so now how can I fix Ubuntu boot to avoid reinstall everything.
View 2 Replies View RelatedI just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
View 3 Replies View RelatedI had installed mandriva first. I reserved 30GB for opensuse.Now, is it safe to just install Opensuse and it will autodetect my Mandriva and preserves it in bootloader?
View 14 Replies View RelatedThe new GRUB2 was supposed to configure itself from the old grub, but got the kernel image partition wrong.I have booted from Knoppix live cd, but need to write to system files. I have searched, and found several suggestions that apparently work on Win machines, but RO permission for root on Linux is a harder nut to crack.
View 4 Replies View RelatedI have a 2 year old Acer laptop running Windows 7 from a 160 GB HDD. This is currently divided into C:/ for Windows and D:/ for data with two small hidden partitions for Acer Utilities and Windows reinstall.
I ran OpenSUSE v11.2 from a LiveCD and decided I would like to dual boot it with W7. I downloaded the full 4.2 GB OpenSUSE Install DVD and ran that as recommended. All went well until I reached the Partitioning stage where the Intelligent Partitioner refused to offer any option other than delete all the Windows partitions and create a single extended partition for OpenSUSE.
It offers (without option):
Delete Windows /dev/sda2 70 GB impossible to resize (25 Gb are free under W7)
Delete Windows /dev/sda3 70 GB although 40 GB are free
Create Extended /dev/sda2 140 GB
Create swap /dev/sda5 2 GB even though I have 4 GB RAM
Create Root /dev/sda6 20 GB ext4
Create Home /dev/sda7 115 GB ext4
The whole HDD is currently formatted to NTFS as a factory default.
Is their a way to resize sda2 and/or sda3 to install OpenSUSE as their is lots of free space available for this installation?
I use Redhat 2 server, the server suddenly can't boot now , it goes to the grub> mode, it can't boot to Redhat kernel
View 5 Replies View RelatedI just received my Slackware 13.1 & the 'Official Guide to Slackware Linux' book. I know that there is a big learning curve to use Slackware and that is why I purchased it - according to Distrowatch, "...if you learn Slackware, you learn Linux!" But, while I am 'learning Linux', I would still like to have a linux distro installed that would be more of a 'no-brainer'.
So the question is, which distro should I install first, Slackware or say, OpenSuse? I know that if I were going to dual-boot with XP, that XP should be installed first - does order matter for 2 linux distros too? Also, are there any points to remember to do during the installation processes so that I end up with a working, dual-boot computer?
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies View RelatedHW config is: AMD Athlon 64 X2 5000+ Black Edition, MSI 785GTM-E45, 2X 1Gb Kingston HyperX PC2-8500. I have set up GRUB to dualboot openSUSE 11.2 and WindowsXP. Initially i had set up system with defaults: CPU@2600MHz (200X13) and therefore RAM@800MHz. Both openSUSE 11.2 and WindowsXP worked just fine. Memtest86 found no problems.
But after a while i decided to change this setup to: CPU@2500MHz (250X10) and therefore RAM@1000MHz, as it promised better overall performance. And now Windows still boots and works better then before. Memtest86 still can't find any problem. But openSUSE 11.2 hangs at boot. I've suspected cpufreq governor, but changing from Ondemand to Conservative in /sys/devices/system/cpu/cpu0/cpufreq doesn't help.
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedI have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I installed OSS11.4 clean install over 11.3, it is suppose to be dual boot together with with winxp.
When i select to boot xp machine starts to boot but it boots forever and eventually
nothing happens further (HHD does not spin). Can it be grub problem or it's
winxp boot problem? When the actuall job of grub stops?
Boot loader location:
Bot form MBR, Boot from root partrition, boot from extended partrition.
i know i asked earlier but i got my usb to be mounted on a different fedora distro. how do i now find my documents or repair it? also how do i add in a repair line if possible?
View 2 Replies View Relatedere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
View 4 Replies View RelatedI've just recently decided to try Linux, but I want to keep Windows 7 on my computer as well. This is also the first time messing with things like partitions. Could anyone lead me to a good site where I can figure out how to partition my hd, dualboot openSUSE, and fix any problems that may occur?
View 9 Replies View RelatedI am having problem here with GRUB, not really a GRUB error but the GRUB can't find the exact LMDE partition to boot. I have 4 sata harddisk with 3 OS running on my PC, the fdisk -l return
fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x73c6f49e
[Code]...
Booting into this LMDE will return error of code 15, it is the same value as it was working before, before I changed to new hdd for my LMDE. What I am trying to do is I want legacy GRUB to manages all the booting.
I have installed openSuse 11.4 and works perfectly. The main problem is, I have another system on my HD, Windows XP, and unable to boot to my XP system. If I choose Windows on Grub menu, its just show me the same text as in the menu.lst at Windows' section. I am able to boot in Windows, by adding 'makeactive' but then, I unable to see the grub menu. And to boot to oS again, I must insert DVD installer and made an update. How tiring.
[Code]...
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedI installed Ubuntu to use ddrescue to clone my dying drive and keep the log.Now the question is:Does Ubuntu really try to repair a corrupt NTFS disk during boot?If so, how can I change this behaviour, including any disks attached to the system in future?I had a similar question for the live cd, I think it should be easier now, as we can configure the system.Btw am I the only one to think an 'auto repair' by default is no good without asking for permission? It's something I dislike on Windows. A corrupt structure is likely a hardware problem, and in this case a repair can terribly damage the file system.
View 2 Replies View Related
