I have hard disk contain Windows 7 and Ubuntu 11 so I cloned it to new one but when I replaced it no OS working just dell mark appearing then restart by itself. In the past started up by Ubuntu menu to select Windows or Ubuntu so now how can I fix Ubuntu boot to avoid reinstall everything.
View 2 RepliesI downloaded ubuntu 10.10 iso, made CD, installed as dual-boot with win Vista home premium and used it for a week to access the 'net and email. Yesterday, while deleting an email, the "d" key stuck down while I was issuing <CTRL>D and the cursor froze. I then rebooted by using the reset button and saw many lines of text including "kernel panic". so I reset and booted into 'repair boot'. Again, many lines of text which stop at the same place if I try this twice.
I assume I've fried my ubuntu install and would like to fix or re-install it. When I installed it, I let the [wubi?] installer make decisions except choice of drive because it picked the external, USB drive. It appears to've used about 80 G on internal drive D: I could boot from the distro CD and see if it will re-install but I'm concerned that I may not fix my problem or that it may mess up my windows installation.
The new GRUB2 was supposed to configure itself from the old grub, but got the kernel image partition wrong.I have booted from Knoppix live cd, but need to write to system files. I have searched, and found several suggestions that apparently work on Win machines, but RO permission for root on Linux is a harder nut to crack.
View 4 Replies View Relatedas friend i am new in linux i install open suse and window 7 in dual boot .. every thing was fine but last week i got terrible virus attack at my win7 so i format as fat32 using yast partionerbut now i also delete first boot partion .. now i can't install window on it .. there is blue screen problem stuck the installation
View 1 Replies View RelatedI have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
View 8 Replies View RelatedI use Redhat 2 server, the server suddenly can't boot now , it goes to the grub> mode, it can't boot to Redhat kernel
View 5 Replies View RelatedI have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
i know i asked earlier but i got my usb to be mounted on a different fedora distro. how do i now find my documents or repair it? also how do i add in a repair line if possible?
View 2 Replies View RelatedI installed Ubuntu to use ddrescue to clone my dying drive and keep the log.Now the question is:Does Ubuntu really try to repair a corrupt NTFS disk during boot?If so, how can I change this behaviour, including any disks attached to the system in future?I had a similar question for the live cd, I think it should be easier now, as we can configure the system.Btw am I the only one to think an 'auto repair' by default is no good without asking for permission? It's something I dislike on Windows. A corrupt structure is likely a hardware problem, and in this case a repair can terribly damage the file system.
View 2 Replies View RelatedI need to boot in WXP just because the guys at the company don't want to update for Linux drivers in the TS so I can't connect from home unless I do it in Windows XP. But today WXP refuses to boot, when the progress bar appears, the system boots automatically. The WXP CD doesn't help, the repair console doesn't let me run chkdsk or anything (dir C: gives an error about listing addresses or something like that). Is there any way to use fsck or anything in Linux to repair the WXP NTFS partition?
View 1 Replies View RelatedI just now re-installed 10.04 on my box, but now I can't get back into Windows. I'm getting the BOOTMGR not found error, that I'm familiar with, but the circumstances surrounding it are completely new to me. In the past I've encountered errors from hard-shutdowns where I couldn't mount the partition, until I checked it with windows first, but I can't boot into windows at all any more. I'm pretty sure my grub is pointing to the right location:
[Code]...
The boot sector somehow got messed up on a friends computer while updating. I used to know how to do it with the old version, but now that they've updated it and changed everything , how do you repair the boot sector from a live-CD with Grub 2?
View 5 Replies View RelatedI'm using Ubuntu Lucid and any sudden power loss will usually cause problems with the file system. When I bring the computer back up, Ubuntu will then scan for errors at boot-time and if any errors are found it prompts me to select whether to repair or ignore them. I would much rather have it select the repair option automatically so that I don't have to be physically present.The reason for this is that i have a web server that should come back online automatically after a power loss.
View 2 Replies View RelatedSo I have been messing around with the new 10.04 and I managed to screw it up. When I started to log off, I closed the lid to my laptop so it would hibernate, but instead the screen went black and I could only see the cursor. It stayed like that for several minutes so I shut it down manually. When I booted it up again, it froze on the splash/loading screen and I haven't been able to boot it since. I've tried to boot in recovery mode, but I think my campus internet interferes with the downloading of the necessary files from the internet. Is there any way to boot a recovery mode from the install disc? Or am I SOL?
View 6 Replies View RelatedI was using the disk utility on Ubuntu 10.04 and wanted to make by 500GB external NTFS formatted USB drive into 1 x 50GB FAT32 and 1 x 450GB NTFS. I clicked the option that said format or create a partition and it basically wiped the whole thing in a split second leaving me with 500GB of seemingly empty space. Obviously the files are still there but I cannot boot the drive to view anything. I have downloaded testdisk, but don't know how to use it, but I am sure there is a relatively simple solution here. I am currently repairing the boot sector of the drive as Test Disk showed the drive as "no type" i.e. not FAT/NTFS/ext4 etc., but shows the correct amount of used space though, but I cannot view anything err go, I cannot use the undelete command as yet.
View 2 Replies View RelatedOK as a recent Windows to Ubuntu convert I made a stupid mistake and now would now like to recover my OS, particularly my files.I had happily been running Ubuntu 10.10 but then used Synaptic to remove Python 2.6 (I was having trouble running Python 2.5 with both installed), I selected to remove Python and all it's dependencies (a bad move as I realise now, as it was quite a dependency list in the end!).
I was left with a semi functional desktop, some things worked but many things were broken / unavailable, neither Synaptic or even Terminal would work to situation.I tried rebooting in the forlorn hope that I would get some recovery options, but it would not boot, boot starts, gets to grub (top left flashing cursor), then that disappears and I am presented with a black screen and nothing then happens. If I then do a hard power down the screen very briefly shows some text (something like enter password) as it shuts down.
Subsequent boot ups just do the same thing. If I boot with an installation disk and move forward to the partition step the original partition is shown as in tact.So, my main question is, is there a way of recovering my OS without the use of low level disk recovery utils (which may be a bit painful and long winded). e.g. what happens if I install 'over the top' of my original installation, will my file system be in tact
I initially had a dual boot where I could decide to either boot into Windows 7 or Ubuntu 10.04. It work seamlessly. At some point, however, when I booted into Windows, it just seem to only load it "half" in the sense that the desktop just turned black (but when ctrl-alt-del was hit I did receive a screen with the different options).
I suspected there was a problem with grub and proceeded to restore the Windows bootloader by booting into the Windows CD and repairing the computer by entering the commands:
After restarting I suddenly do not have the option to boot into Ubuntu (where did it go?) and booting automatically into Windows the original problem persists.
Any idea what happened here and how I can restore things?
I have a bad entry in /etc/fstab I have tried to tried to change in boot but it says read only. It will not take su. I have a livecd but I can't seem to get to my filesystem from a terminal where I can specify su
View 2 Replies View RelatedI just installed SuSE 11.2 on top of where 11.1 used to be on my hard drive. Acronis Operating System Manager will let me boot into XP Pro but it tells me it cannot find SuSE in the master boot record. If I repair the master boot record in SuSE, XP Pro disappears. What do I do?
View 1 Replies View RelatedMy PC will not boot.I have tried to repair on the start up screen and by YaST with on success. sometimes it says device.map is wrong.
View 1 Replies View RelatedI am having some weird problems on my Ubuntu Hardy. Single partition. I wonder if there's a chance i can avoid the reinstall afresh and try some sort of repair from the ISO cd...?! Is it?
View 1 Replies View RelatedI had previously installed windows xp. Then I installed ubuntu and dual booting was fine. Now my windows is corrupted. I need to either repair or reinstall it, and I think my mbr will be affected. I will test all this on vmware first.
View 2 Replies View Relatedi have installed first xp after that liux . but now i want to format xp. but xp is not formatting
View 4 Replies View RelatedHow to repair filesystem in Red Hat Linux version 5.0
View 1 Replies View RelatedA drive in a RAID array failed and as a result one of the partitions held on the LVM has corrupted. The result of LVS is below.
Code:
[root@brassxen3 ~]# lvs
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
MGT VG_XenStorage-511bee02-d169-b418-6a9e-a88b7e3ce939 -wi--- 4.00M
[Code]....
This partition belongs to a virtual machine, the partition is not visible when booting this VM using a live CD or attaching it to another VM. When booting anything with this partition attached it takes hours to boot.
I edited /etc/fstab and after that the computer won't boot up. I got as far as (Repair filesystem) 32 #mount -w -o -remount / and it says already mounted or busy. I type (Repair filesystem) 32 #mount And it looks like all mount points are (rw) I try to edit /etc/fstab but when I save it I get told that the filesystem is READ ONLY.
View 4 Replies View RelatedWould it be possible to use a Linux Distribution on a USB to repair a windows registry problem, or to use Linux to change some files in the Restore files? If so can anyone recommend a version? I have a laptop running windows Xp that has no cd drive, keyboard, or mouse function due to a registry error. I have a good restore point with the correct registry entries that I could change if it would be possible to boot from a USB version of Linux.
View 5 Replies View RelatedI want to use the live cd (Linux mint 9) to do a repair install on my system, but when I start, it says that it has detected another instance of linux and this must be removed before I can continue. I don't want to do this as I have a lot of data on this system and I don't want to lose it. The error occurred when I did a dist-upgrade and installed new kernels. Before I installed the kernels, a message came up saying the following packages are already installed but are no longer required. Use apt-get autoremove to remove them. I did this and now when I boot, I get as far as the five changing dots on the screen and it just stays there. I went into command line and ran apt-get mint-meta-main mint-meta-gnome, and at the end it came up with problem with /etc/utilities/desktop.
View 6 Replies View RelatedI have forget the root password of Red Hat Enterprise Linux 5. Please tell me how to recover it from the other linux account of the same version. I also want to know that after setting the new password did I have to repair the grub or grub will be as usual.
View 1 Replies View RelatedPlaying with the Box, I deleted a Raid-0 partition intentionally, saved it, and reboot drops me to (Repair Filesystem#) prompt. I notice during boot-up that the box didn't find /dev/md0, which is expected.
So what's the recovery procedure, since I can't edit #/etc/fstab, permission denied.
#fdisk -l
shows all other partitions.
Not much familiar with fsck/e2fsck, yet like to give it a try.