I followed this workaround for Nvidia cards and the boot screen
[url]
Everything worked fine, except at boot, the splash screen doesn't fill the entire monitor. I set it to the native resolution of my monitor, 1920x1080. Its just not stretched fullscreen.
I have an Nvidia card and I am using ubuntu 10.04. Before installing the ubuntu nvidia restricted drivers, the boot screen with the ubuntu logo would cover the entire display area of the monitor. But now, after installing the Nvidia driver and fixing the display resolution of the boot screen with the Plymouth fix, the boot screen doesn't expand to fit the entirety of the monitor display area. How can I fix this? There is a good 2 inch off from either side of the display while booting.
View 3 Replies View RelatedI recently upgraded to 64-bit maverick (from 64-bit lucid) and I'm getting this ugly boot splash now - it's a purple screen with a very basic "ubuntu 10.10" written in terminal font and four dots underneath. I am running a dell xps m1530 with nvidia graphics card, and haven't had any trouble with the boot splash before. I have run the additional hardware drivers utility and it says I have the latest Nvidia driver already loaded apparently.I have looked around the forums and tried a few suggested solutions, like updating the initramfs with the framebuffer=y line but that didn't do anything. I also tried adding a new theme in plymouth and switched to that instead, but it still doesn't come up.
View 6 Replies View RelatedI started my Debian 6 machine today and the terminal (Alt+Ctrl+F1) is only using the top left area of the screen. The resolution is correct but the whole screen just isn't filled with text. When I log in and run startx the GUI is in a very small resolution.
I've tried everything I can find with GRUB_GFXMODE and GRUB_GFX_PAYLOAD but nothing works.
i just installed an ati radeon hd 4350 video card. after doing so i installed the restricted drivers and found that the image would no longer fill the entire screen no matter what i did. i then disabled the drivers and rebooted. now when i log into gnome all i can see is a white desktop with no icons or even programs when they are loaded (i can tell that some load because i can see when the cursor changes for a text box and the like). would re-enabling the drivers help with this? if so i need a command to do so as i have had to boot into xterm to write this.
View 1 Replies View RelatedI have installed Lucid two weeks ago and I have a lot of problems to configure my video card Nvidia Geforce gtx260. Thanks to the help of ubuntu forums members I have correctly installed it and now I can use Compiz fusion and other amusements.
A particular problem is that as i choose Ubuntu from Grub menu the splash animation I've seen using the installation dvd ramdrive now doesn't start and i am directly addressed to the desktop username/password.
In your view could it depend on my video card? If yes what can i do to make the spash working (plymouth or others)?
I just installed Kubuntu 10.04 on my Desktop computer. Prior to KDM loading, all I get is a blank, black screen with no Plymouth splash screen. I'm confident that this issue is not related to KDE but would apply to all Ubuntu variants. Here are my computer specs:
Kubuntu 10.04 x64 running with all updates
Dell Studio Desktop
Intel Quad-Core Processor 2.66Ghz
8GB ram
Intel Integrated Graphics
I should note that I have full desktop effects running smoothly under KDE with compositing enabled, so my integrated graphics is not necessarily the problem unless Plymouth is not loading the graphics drivers successfully.
I recently bought a new laptop with an ATI Mobility Radeon 5470HD graphics card in it and installed ubuntu. Everything works just fine, but at the startup, no plymouth splash screen comes up, just a black screen with a white dash...
View 4 Replies View RelatedI'm currently running Linux Mint 10. Since I have an nVidia graphics card, I installed the driver and used this fix to fix the Plymouth bootsplash afterward because it was in text-mode for the bootsplash. I have since installed and configured e4rat to cache files at boot. It seems to have sped up things considerably, but has also re-broken my bootsplash. The resolution is correct, and plymouth is running, but the splash doesn't show.
Is there a way to get Plymouth using the uvesafb driver AND play along with e4rat?
I am using 64-bit Linux Mint. My copy of e4rat is compiled from source because the prebuilt package was 32-bit only My graphics card is nVidia 9800M GS (notebook) The splash screen appears during shutdown as it did before. It's only the boot splash that is affected.
I'm going to do a permanent install of fedora 10 soon, within the next couple of days.
1. When installing it asks if I need to log in as NIC, something about networks. What would that be about?
2. Is there any way to resize the screen to fill more of the monitor? Right now it leaves about an inch of blackness on the let side which is more than other os's that I've seen.
Ubuntu 10.04 32bit
Gnome 2.30.2
Compiz active
Cairo Dock loaded
I've loaded Cairo-dock, deleted my bottom panel in Gnome & reduce my top panel to a minimum showing only "notifications". I can't get my windows to fill the top 10% of the screen on maximise without going full-screen and losing the window borders and the menu bar.how I can configure the maximise setting to use the whole screen?
Have any of you used Debian 6 Squeeze yet? Have you encountered a problem of the OS not entirely filling in the left side of the video monitor leaving approximately (19 inch monitor) a half inch vertically black non-filled part?
This happens in several Debian 6 Squeeze itterations: Net-intall, commercial intalls, etc.
It could be a hardware problem but it happens on other machines as well, so I do not lean that way. There are other machinations of video pasting during bootup such as the left hand of the screen being on the right and vice-versa, scrunched up lines of garbage taking hold of certain sections of the screen.
How can i modify the ubuntu low-resolution fallback splash screen (probably plymouth) which displays the text "Ubuntu 10.10" with progress-dots?
View 1 Replies View RelatedI have a custom Ubuntu Disc I made with remastersys, but for some reason on some system (such as virtual box) it does not use my custom plymouth boot splash - instead it reverts back to the default Ubuntu one. On most systems, it displays my custom splash just fine though...
View 1 Replies View RelatedThe monitor on my laptop has become a bit sketchy and money is tight at the moment. I am currently connected to an Acer flat screen monitor. I have the ubuntu settings for using only the external monitor. This works fine once I"m in Ubuntu. Is there any way to force the display to the external monitor prior to ubuntu starting? This may or may not be a linux-related question. It was be very helpful if I could see my Grub menu on the external screen. I could not find any setting in my bios. The keyboard shortcut sometimes works but not on the grub menu.
Ubuntu Lucid
Dell Precision M20 laptop
ATI video card
Dual boot with XP Pro.
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View RelatedI have searched the forums on this problem and I am still not really clear on the fix for this or even if I should wait for final release. I am running Lucid 64bit and have upgraded through the cycle from Karmic. I am using nvidia proprietary drivers. All the time that the Plymouth boot screen has been available it has been in low resolution. As we are now at beta 2 I am torn between searching a fix or waiting for the final release. So, from what I have read I need the 'nouveau' driver to fix this issue.
1. How do I install this in place of my existing nvidia proprietary driver?
2. I am a little bit confused by the hardware drivers selection panel telling me that I have an nvidia driver installed but that it is not in use-I read that this might be a bug?
quite a while ago i decided i wanted to change my splash
View 1 Replies View RelatedI already had Plymouth issues on 10.10, which was solved by this script [URL]
After upgrade, boot only gave me a blank, purple screen, so I used his revert script then tried this : [URL]
But I'm only getting a black screen. Removing vga=795 option only make it stay purple. It might be because of the multiples workarounds I tried back in 10.10, but I don't know how to clean that up. I have an ATI HD Radeon Pro 2400 card with free drivers (but I was using the proprietary ones during upgrade).
Fooling around with trying to edit splash themes, and in trying to apply one, I broke the startup splash. The shutdown splash still works. I know that update-initramfs -u is supposed to fix this, but it hasn't. I run dpkg-reconfigure plymouth, and it gives me the list of themes; I can pick one, and it seems to do its thing; I run update-initramfs -u, and that looks like it worked too; but then I reboot, and the shutdown splash is unchanged, and the startup splash is just a black screen until GDM loads. It's as if I hadn't changed anything.
View 1 Replies View RelatedThis happens on boot on Fedora 15. Plymouth Boot Screen just stays there and I can't login. Searching around suggested kmod-nvidia to cause this (one moth ago ofc), but here I am with Intel Graphics and the default drivers.
View 6 Replies View RelatedTrying to tweak my boot-up time. I changed the FRAMEBUFFER (/etc/initramfs-tools/conf.d/splash) from "n" to "y". But it actually increased my boot time- as I now get two plymouth splash screens (one, followed by a brief black screen, then another Plymouth splash)
Changing the FRAMEBUFFER back to "n" results in NO splash screen.
How do I get back to just having one splash screen (as opposed to two or none)????
After installing the proprietary nVidia drivers for my 8800 GT, the purple UBUNTU boot screen got gigantic and ugly.I installed startupmanager and changed the settings from 640x480 to 1024x768.The result was a garbage (scrabbled) boot up splash (UBUNTU)That didn't work out so I set everything back to 640x480 but that made it go to no splash on boot (black screen until GDM), and a garbage UBUNTU splash on shut down.How can I just put it back to the ugly / gigantic boot screen that was there before I screwed it all up?
View 9 Replies View RelatedI've recently made clean install to Lucid, and now Boot splash doesn't appear at start up. Only black screen appears and after that login window comes. However, boot-splash appears at shut-down and also in LiveCD.
View 1 Replies View RelatedIs there a way to install Plymouth Boot screen for centOS 5.5 ?I am unable to get any RPM for CentOS.Fedora has it but CentOS doesnt.I tried compiling it from source but I get an error that libpng 1.2.16 >= is required for this. Unfortunately even that is not there in CentOS.Only 1.2.10 is there for CentOS.
View 2 Replies View Relatedi decided i wanted to change my boot screen and i installed plymouth themes and used solar and now that i dont like any of the Plymouth themes, i want the original purple boot screen back but i dont know how and it would be awesome if somebody could tell me P.S I'm a bit of a linux noob so sorry if i got anything muddled up lol
View 3 Replies View Relatedfresh install ubuntu does not boot up shows splash then goes blank.how do i get into boot c-line
View 3 Replies View RelatedI been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
View 3 Replies View Relatedreally wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
I just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies View Related
