I been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
My friend was showing me how to change the splash screen and used a app called start up manager (SUM).He changed the resolutions for GRUB and something else. The GRUB screen resolutions has changed fine but after that I get a line of text which I cant read as its too quick.
So I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
I don't know what caused it, but as I boot into Ubuntu (9.10), the login screen never appears. Boot splash shows,then the cursor shows up but never the login screen. I haven't found anything that will reset the default gdm or login screen that works.
I just installed ubuntu 10.4 on my new laptop and when it boots up there is no splash screen (All I see is a blinking cursor) and it takes about 28 seconds to boot up... I do have all the graphic stuff working...
I recently installed my first distro, Gnome Ubuntu Linux 10.04 via WUBI dual-booting alongside my Windows. I decided to try the other desktop environments. So I installed Kubuntu-Desktop (KDE) and Xubuntu-Desktop (XFCE) using Synaptic Package Manager.
However, Kubuntu KDE changed the boot splash screen into a from the default Ubuntu one, to the Kubuntu one. Also Xubuntu XFCE changed the log-in screen to the Xubuntu one. I DO NOT want these changes. I just wanted Normal Ubuntu-branded Ubuntu Linux with the option of logging in into the desktop environment of my choice.
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
I tried to fix splash screen resolution on boot up in 10.04 from instructions I found on the net. I updated lines in grub. Now when I boot I see the dual boot menu but hit linux i just get a black screen. I can't get into my system from there.
I'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
I switched back to my ubuntu installation few hours ago and I couldn't notice the strange boot screen! I remember that it used to be orange, there was the ubuntu logo and a nice loading bar. All is displayed now is a horrible purple background with just the text "Ubuntu" in the middle and a few dots just below it, showing the loading process.. I don't know how to restore the classic splash screen (I also found the original background in /usr/share/images/xsplash ).
I just recently installed 11.04 fresh onto my computer. Everything's been working great and i've been enjoying the new interface immensely. However, today when i booted my pc up, after i entered my password and logged in, I'm stuck at the splash screen. I can move the mouse and i have the default 11.04 image up on the screen, but ive got no menus or taskbars and i know it hasn't logged in yet, because my wallpaper isnt up. I've restarted a number of times and this keeps happening.
I have a Dell dimension 8300 dual booting with windows 7 and ubuntu 10.10. I installed BURG on it since I didnt like the text grub style. Problem is I cant change the splash screen no matter what I do, or changes I make. My screen resolution is 1280x1024 and my video card is an Nvidia card.
Originally the splash screen was a purple screen with ubuntu 10.10 white text and some dots on it. After installing the plymouth themes, now it has changed to a blue screen with Kubuntu(?) on it... Id like to know whats wrong and how can I change the splash screen?
UPDATE: Ok I went to synaptic and saw plymouth.kubuntu-logo and kubuntu-text were installed and enabled (had litle ubuntu logo to the side). So I removed those 2 files then did a reboot. Now im back to the purple screen with ubuntu 10.10 white text and the dots but I still cant change the splash screen...
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode) How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
I'm trying to get a fresh install of Ubuntu 10.10. I've used unetbootin to write the image to a usb flash, but every time I try to boot from it I just get the burg splash screen. I've changed the boot order in bios and so on, but it starts burg all the time. The image md5 is also right.
I have never been able to see the splash screen, something that I'd like. I have checked the options on the bootloader and it says "splash=silent" (that's disabled?). I found it confusing, because the ubuntu kernel boots with "splash" but when I try that option on OpenSuSE 11.2 it doesn't.Also when I shut down the laptop the screen goes crazy, only the two top cms shows "something" which are blinking and crazy green and white console words moving from one place to another so fast I can't even been able to read what it actually says.Either way, the laptop shuts down without any problem (?). I think is the normal shutdown process (without splash) but it's a bit perturbing. I've had had a couple of kind of "aesthetics" issues, but far from critical. My overall experience with OpenSuSE after 4 or 5 years being "debianized" have been very nice .
I recently installed Ubuntu 10.04. I'm trying to become familiar with the file system. I noticed my MP3 player (USB) is not mounted automatically when I plug it into the USB cable. I searched Google to find out how to auto mount this device and it worked. However, I didn't give this enough thought to what I was doing I guess. Now if the MP3 player is not connected to the USB cable the boot process stops at the splash screen waiting for the device. The window on the screen states the following:
The disk drive for /media/sdc1/ is not ready or not present. Continue to wait or press S to skip mounting or M to manual recovery.
I don't remember what I did to start this whole mess so I don't know how to undo it? Could someone please help me undo this? I would like the device to auto mount ONLY if it's plugged in if this is possible.
I'm on HP tx2000 Tablet PC, with nVidia GeForce 6150 Go onboard, 4GB of RAM, Ubuntu 10.04 amd64 Desktop. I keep getting a blank screen after boot splash when I'm on BATTERY POWER. Though I get a blank screen, the screen comes alive when I SUSPEND the laptop by closing the lid, and then RESUME the laptop. Then I can see the logon box and whole desktop.
Usually people get problem by suspending their laptops (usually the screen not coming back after resuming), but now I SOLVE the problem by suspending my laptop. Well like I said I can somehow get the screen right, but I really can't (and don't want to) suspend and resume my laptop every time I boot. Problem occurs REGARDLESS of type of display driver I use. nVidia proprietary, nouveau... whichever driver I use, I get the same conclusion.
I am at a loss trying to figure out the options to not show the scrolling boot messages during the boot-up of Clonezilla. Is there a way to have a loading splash screen or even have a static logo that is displayed during the boot process? I have my automated recovery method all ready to go short this one last feature. I have searched all over and am coming up empty on this one.
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
This is a standard install, just like I've done dozens of times before.
Plain vanilla, just installed.
When I boot, I get to the splash screen and it doesn't go into the default selection.
Could this be a Hardware thingy? The reason I ask is because I've had this issue happening with 5.2 on the same machine. I just formatted it completely and installed a fresh 5.3 i386 on it and I get the same behavior.
[root@server ~]# cat /boot/grub/grub.conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3 Kernel-pae 22.214.171.124-4.1 from Kernel Stable. GRUB 0.97-174.1 from openSUSE 11.4 Upstart 0.6.5-33.1 xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?