I've recently made clean install to Lucid, and now Boot splash doesn't appear at start up. Only black screen appears and after that login window comes. However, boot-splash appears at shut-down and also in LiveCD.
View 1 RepliesI'm using opensuse 11.4 kde 4.6. When I (try) to start libreoffice, splash window appears but program doesn't start.
When I launch it from console as normal user i don get any clue, but as root user i got this:
Code:
I run "export $(dbus-launch)" and libreoffice works, but only launching it as root user.
fresh install ubuntu does not boot up shows splash then goes blank.how do i get into boot c-line
View 3 Replies View RelatedI just upgraded my computer from Ubuntu 9.10 to 10.04 (beta2) restarted and the splash was screwed i thought meh i can live with it then went into my account switched to tty1(ctrl+alt+F1) and it was the same. got annoyed now asking had anyone else encountered/know how to fix this problem. pictures attached sorry for bad quality took on phone, but that is how it really looks.
View 9 Replies View RelatedI recently upgraded to 64-bit maverick (from 64-bit lucid) and I'm getting this ugly boot splash now - it's a purple screen with a very basic "ubuntu 10.10" written in terminal font and four dots underneath. I am running a dell xps m1530 with nvidia graphics card, and haven't had any trouble with the boot splash before. I have run the additional hardware drivers utility and it says I have the latest Nvidia driver already loaded apparently.I have looked around the forums and tried a few suggested solutions, like updating the initramfs with the framebuffer=y line but that didn't do anything. I also tried adding a new theme in plymouth and switched to that instead, but it still doesn't come up.
View 6 Replies View RelatedI followed this workaround for Nvidia cards and the boot screen
[url]
Everything worked fine, except at boot, the splash screen doesn't fill the entire monitor. I set it to the native resolution of my monitor, 1920x1080. Its just not stretched fullscreen.
timeoutd doesn't start on boot.
I have Ubuntu 10.10 with timeoutd-1.5-10.1ubuntu1 installed. It used to work up until a couple of weeks ago. The /etc/rc*.d/S20timeoutd pointers are there, but timeoutd does not show in ps aux|grep timeoutd after a boot. Neither dmesg nor syslog show any sign of an attempted start-up or a failure.
If I manually /etc/init.d/timeoutd start it does run and do it's job. Unfortunately our teenager has discovered that a reboot makes it go away.
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4).
2. I can access the windows partition from Linux and see all the files.
3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP.
4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
I have an old computer (Pentium 4) without a monitor. To make the most of it I installed Ubuntu server on it and have been using it for almost a year. A couple of months ago I don't really recall what I did but since then it doesn't start-up unless a monitor was plugged in.
I've tried pinging it but it doesn't respond when no monitor is plugged in. meaning it's not even booting correctly.
I'd like to know what the problem is and how to fix it. And I'd really appreciate any help in diagnosing the problem. I just don't know where to start.
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
How do I resolve this?
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies View RelatedMy laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction: ATI Installer HOWTO for openSUSE users after installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually. i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important. now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.the graphic card is :
ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
I am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?
View 1 Replies View RelatedWhen I was using polipo on Ubuntu, it automatically start at system boot.
Now I'm using opensuse, I installed polipo from the repository, however, I have to manually start it by using "sudo polipo". If root privilege is not given, polipo won't work correctly.
What should I do to make it start at boot automatically?
a friend told me to creat /etc/boot.local, with code...
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
Something happened last night after I installed banshee (I think). I can no longer login to Ubuntu 9.10.When I start up my laptop and after the grub, Ubuntu freezes at the brown spotlight wallpaper right after the Ubuntu splash screen.Usually, after the splash screen I have to login with my password but before that comes up Ubuntu freezes.I've updated to Ubuntu 9.10 since it first came out without any issues until now.
View 9 Replies View RelatedI recently installed Ubuntu 10.04 on my laptop (clean install, not upgrade), and when I turn my computer on, I get a black screen instead of the purple "Ubuntu" screen before my system logs on. When I log off, I get the purple "Ubuntu" screen, but not when I log on.
View 6 Replies View RelatedI just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
I have installed Lucid two weeks ago and I have a lot of problems to configure my video card Nvidia Geforce gtx260. Thanks to the help of ubuntu forums members I have correctly installed it and now I can use Compiz fusion and other amusements.
A particular problem is that as i choose Ubuntu from Grub menu the splash animation I've seen using the installation dvd ramdrive now doesn't start and i am directly addressed to the desktop username/password.
In your view could it depend on my video card? If yes what can i do to make the spash working (plymouth or others)?
However i have just installed Picasa 3 and it will not start. The splash screen comes up then goes away then nothing. I tried starting it in a terminal to see what the output said but nothing there either. Anyone have any ideas about this one?
View 6 Replies View RelatedI am looking to disable my start-up splash screen and shut-down splash screen. I have modified my /etc/grub.conf file by changing:
splashimage=(hd0,0)/grub/splash.xpm.gz
to
#splashimage=(hd0,0)/grub/splash.xpm.gz
In Fedora-14, how do I set the start-up screen to solid black-splash instead of the light-blue?
View 1 Replies View RelatedUbuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View RelatedI'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
I updated from 9.10 karmic to 10.04 LTS. Everything worked fine until, I restarted. Upon logout there are no splash screen like I had before in the 9.10, and my fan on my gfx are going crazy, spining at 100%. Well then I got to the grub loader, and discovered my boot splash was gone to. The only thing which is displayed on the screen are: mount dev /dev failed device71 Starting up. Then 10 seconds later alot of texts shows up and I get the login screen. I've looked around on the forum and other sites for a solution, but with no luck.
View 9 Replies View Related