Software :: Debian 6 Squeeze Does Not Completely Fill The Monitor Screen On Left
Mar 18, 2011
Have any of you used Debian 6 Squeeze yet? Have you encountered a problem of the OS not entirely filling in the left side of the video monitor leaving approximately (19 inch monitor) a half inch vertically black non-filled part?
This happens in several Debian 6 Squeeze itterations: Net-intall, commercial intalls, etc.
It could be a hardware problem but it happens on other machines as well, so I do not lean that way. There are other machinations of video pasting during bootup such as the left hand of the screen being on the right and vice-versa, scrunched up lines of garbage taking hold of certain sections of the screen.
View 3 Replies
ADVERTISEMENT
Apr 10, 2009
I'm going to do a permanent install of fedora 10 soon, within the next couple of days.
1. When installing it asks if I need to log in as NIC, something about networks. What would that be about?
2. Is there any way to resize the screen to fill more of the monitor? Right now it leaves about an inch of blackness on the let side which is more than other os's that I've seen.
View 3 Replies
View Related
Jul 15, 2010
I have an Nvidia card and I am using ubuntu 10.04. Before installing the ubuntu nvidia restricted drivers, the boot screen with the ubuntu logo would cover the entire display area of the monitor. But now, after installing the Nvidia driver and fixing the display resolution of the boot screen with the Plymouth fix, the boot screen doesn't expand to fit the entirety of the monitor display area. How can I fix this? There is a good 2 inch off from either side of the display while booting.
View 3 Replies
View Related
May 9, 2010
I followed this workaround for Nvidia cards and the boot screen
[url]
Everything worked fine, except at boot, the splash screen doesn't fill the entire monitor. I set it to the native resolution of my monitor, 1920x1080. Its just not stretched fullscreen.
View 4 Replies
View Related
Sep 8, 2011
I started my Debian 6 machine today and the terminal (Alt+Ctrl+F1) is only using the top left area of the screen. The resolution is correct but the whole screen just isn't filled with text. When I log in and run startx the GUI is in a very small resolution.
I've tried everything I can find with GRUB_GFXMODE and GRUB_GFX_PAYLOAD but nothing works.
View 2 Replies
View Related
May 28, 2011
After playing one of the kde games in squeeze- breakout - which I had a hard time exiting - and even after I restarted the computer the cursor will not go to the lower left corner of the desktop, where the kde menu button is.
View 1 Replies
View Related
Feb 25, 2011
My monitor keeps flickering every now and then, i happens more than a couple of times in a day. I have Debian Squeeze installed, the system is updated.
Below is the relevant o/p from lspci -v
Code:
$lspci -v
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Dell Device 0294
[Code]....
View 5 Replies
View Related
Mar 25, 2010
setting up my dual monitors. I can get a continuous screen but the screen does fill the lcd screen all the way. I have dove in to xorg. I'm on fedora 12 .
[Code]...
View 6 Replies
View Related
Jul 30, 2010
Trying to install squeeze again and everything has gone ok including network connection & partitioning & retrieved 916 packages from mirror.
But now installation has stopped completely at: Configuring ca-certificates
And will not proceed further.
View 3 Replies
View Related
Jun 28, 2011
I would like to use two monitors with my desktop, so connected them the other day and it worked straight away, which is good but... The monitor configuration app always want the primary monitor to be on the left hand side, thus it always extend my desktop right. Can I do anything to extend my desktop to the left instead of to the right so I can have background application on the screen to the left?
View 8 Replies
View Related
May 1, 2011
when Gnome starts my Desktop completely freezes. So I decided to reinstall and install Gnome2. When Debian is freshly installed I still need to configure and install my ATI 6950 Graphic card and the X config. Since the latest drivers from ATI I can use the --initial config from ATI. This all seems to work. But also when I use Gnome2 my screen completely freezes. I don't see any special things in my logs. I do remember that with my previous PC I had the same problem. This was the "first" reason why I left Debian for my desktop.
View 1 Replies
View Related
Jul 31, 2010
Ubuntu 10.04 32bit
Gnome 2.30.2
Compiz active
Cairo Dock loaded
I've loaded Cairo-dock, deleted my bottom panel in Gnome & reduce my top panel to a minimum showing only "notifications". I can't get my windows to fill the top 10% of the screen on maximise without going full-screen and losing the window borders and the menu bar.how I can configure the maximise setting to use the whole screen?
View 1 Replies
View Related
Feb 9, 2010
[URL] and then take vid and open that in whole screen. Since is it this machine why I got blank if I am try to expand it to fill screen.
View 2 Replies
View Related
Mar 23, 2011
I installed Debian Squeeze from Debian 6.01 CD 1 on my old Pentium 4 Desktop. Now when I log off, the screen gets black and login window is not appearing. I have tried all old post of linux questions forum and also of ubuntu
View 7 Replies
View Related
Jul 17, 2010
I just installed Squeeze because Lenny didn't have the best Bluetooth support. (Just installed blueman and everything I have works without any configuring, by the way). In Lenny, gdmsetup would allow me to choose a theme for the login screen as well as change settings for logging in. With Squeeze, fully updated, I only get a couple simple options for changing automatic login (screen shot of gdmsetup).
There is a config file that I found: Code: /etc/gdm3/greeter.gconf-defaults It is a simple config file but I do not know the available themes and cannot preview them.
View 5 Replies
View Related
Dec 15, 2010
After entering runlevel 2 and gdm loads, I only get a black screen. I hear a beep that indicates gdm has loaded, but everything stays black. Trying to switch to a console using ctrl-alt-f1 does absolutely nothing.
At one point, I disabled gdm from starting in runlevel 2, and rebooted. I then typed into tty2 "sleep 60 ; reboot" and in tty1 "gdm" and hoped for a reboot if the graphical login didn't appear. No reboot occurred, my black screen remained.
I've issued acpi=off at kernel command line (from grub) and disabled all acpi services. That seemed to work for a few hours but now I get the black screen again every time. There's no option in the BIOS to switch from acpi to apm, so I've done all I can do on the software side of things.
[Code]...
View 3 Replies
View Related
Feb 26, 2010
i just installed an ati radeon hd 4350 video card. after doing so i installed the restricted drivers and found that the image would no longer fill the entire screen no matter what i did. i then disabled the drivers and rebooted. now when i log into gnome all i can see is a white desktop with no icons or even programs when they are loaded (i can tell that some load because i can see when the cursor changes for a text box and the like). would re-enabling the drivers help with this? if so i need a command to do so as i have had to boot into xterm to write this.
View 1 Replies
View Related
Aug 11, 2010
After doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
View 3 Replies
View Related
Jun 2, 2011
I installed Debian squeeze on my old Dell Latitude C600 laptop. I Installed it from a cd that worked to a friend of mine. I finished the installation successfully. After booting the computer I can get to the grub screen and after choosing the OS (Debian GNU/LINUX, with linx 2.6.32-5-686) I see the computer loading and running command lines, but after few lines, I get black screen and I hear the computer "working" but can't see anything and it doesn't react to anything that I do.
View 9 Replies
View Related
Dec 22, 2010
I updated my system as usually. Sadly since then my screen flickers every 10 (or so) seconds. It turns black for like 10ms and then back to whatever it showed before. This behavior occurs after some uptime. Haven't measured the flicker-free time span yet but I guess it starts after 15 to 30 minutes.I'm using a up-to-date Squeeze with KDE4 an the nvidia-driver for me GeForceGo. Interesting thing is: It does not flicker while using fluxbox using same xserver.
View 1 Replies
View Related
Oct 1, 2010
i finally got X and gnome installed and working on squeeze now.but the login screen and network settings were grayed out.Since i install those things from installation CD, I am thinking there are packages missing.
View 6 Replies
View Related
Apr 26, 2010
what would happen if aptitude needed to ask me a question, (like which config file to keep for a certian essential program, etc.). I don't think I've come across this problem yet, but I really wouldn't know. I do get the following lines on the screen with aptitude-gtk just about every day when I do squeeze updates and I wonder if it's not related to this same question. Does anyone know if aptitude-gtk is capable of asking you, the administrator, questions about a package that it's updating?
[code]...
View 2 Replies
View Related
Jun 13, 2011
I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies
View Related
Feb 16, 2011
I have ATI Radeon 9550
"lspci -v | grep VGA
02:00.0 VGA compatible controller: ATI Technologies Inc RV350 AS [Radeon 9550] (prog-if 00 [VGA controller])"
using free driver. Everything is working fine but movie playing. In Totem Movie Player I got full screen but playing is like slow motion, and in SMPlayer I can't get full screen. Window is in full screen but movie is not...
View 6 Replies
View Related
Jun 18, 2011
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found."
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
View 3 Replies
View Related
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
Aug 2, 2011
The story was starting newbie named cassamovefall installing graphic driver for his new Debian Squeeze. Here his uname -r : 2.6.38-bpo.2-686-bigmem He use Dell N4110 notebook, with specs : Core I5-2410M & Dual Graphics ( Intel HD 3000 & ATI Radeon HD 6630M with codename TURKS )
[Code]...
He had tried kinds driver to install it; from fglrx, ati, radeon & radeonhd ; and also with kind ways. But they are gave same result, when login screen should appear, but it didn't. It's just showed blank black screen with blinking '_' (underscore) at top left. This is his Xorg.0.log when using radeon driver, via recovery-mode (text based) :
[Code]....
View 2 Replies
View Related
Aug 15, 2011
I have been using Debian for three or so years now. Not sure what all the difference it makes, but I'm installing Debian Squeeze on a Sony Vaio desktop computer... With an nVidia GeForce 5200 which works perfectly in other computers and on the same computer when dual booting with Windows XP. I've tried and installed several times already to no avail. When I fresh install just the standard system, no graphic desktop, no Xorg, no servers, no nothing, just the standard system, command line only. When I do the initial boot on this blessed computer, part way through the boot process my monitor shuts off and it says frequency out of range (thats a message from the monitor itself, not the computer or debian).
The same install process I've executed countless times. I thought it was a dependency issue, problem with X perhaps. I can install lenny, but not squeeze. When booting in single user mode, it seems like it craps out either during or right after it loads or does something with the "drm" - you know how during the boot script, the machine "flashes" the fonts and the screen blips... its seems to me like that's where its happening at. The monitor works just fine, I really don't think that's the problem. But it is frustrating and I have no clue where to go about finding what the issue is if I can't see whats going on.
View 9 Replies
View Related
May 17, 2011
My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
View 6 Replies
View Related
Jul 30, 2015
I've recently installed Debian v8.1 and installed Nvidia driver 340.46. In nvidia-settings I am able to enable my second monitor and enable it/set it's position..etc. My second monitor is not being detected in Debian Display and is 'on' but only showing a black screen. I've tried researching and implementing various 'fixes', but I'm not having any luck.
I'm running dual GTX 570's with a monitor plugged into one each (DVI). I noticed in my xorg.conf under Section "Screen" I have an option "MultiGPU" "Off"; would this be part of the issue?
I've tried:
- purging all nvidia drivers and re-installing
- installing different versions of nvidia drivers
- add nomodeset in grub
View 2 Replies
View Related
