Ubuntu One :: Shows One "LOCAL MACHINE" Entry Which Doesn't Go Away
Mar 31, 2010
However, in the dialog which shows the connected computers to the account, I found that there are a lot of old computers (previously linked from my home computer, office computer, Virtual Box installations. Hence, I wanted to delete all these computer links and only add my home computer and office computer afresh. Hence I deleted all the computer links and in the end, it shows one "LOCAL MACHINE" entry which does not go away. Now, from my office computer (again Lucid Beta1)
I am able to access the Ubuntu One account and registered my office computer. But in my home computer I am unable to access Ubuntu One. I tried un-installing and then re-installing the Ubuntu One, but still does not work, and stubbornly displays only one entry as "LOCAL MACHINE" and I cannot figure out anyway how to add my home computer to Ubuntu One and access the same Is there some way to completely uninstall Ubuntu One (along with all settings) and then re-install?
I am trying to run xeyes on a remote machine via ssh connection. Both my local and remote machines are Ubuntu 10.04. I connect to remote server via ssh -X and It does not forward to display to my local machine...
Code: root@goliath:/opt/install/bits# ssh -X -l root duke root@duke's password: Linux duke 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux Ubuntu 10.04 LTS [Code]....
I have an appliance called my_appliance.raw. To start the appliance locally, I use:
[code]...
After that I would like to ssh into the guest from the host but just the ssh command doesn't work. firewall is disabled on guest. the ip I use is the one that ifconfig shows when I run it on guest. sshd is running.
I am having a situation where I do not have DNS server (the person who has that is not me) for a few websites which are running on a reverse proxy. I recently after having a long trouble shooting hours found that my proxy pass entries look as follows
I have lived with this for months and it isn't a big deal, but my Thunderbird 3.1.7 shows 2 Outboxes-Local Folders. Right now I have my Inbox divided into Local Folders and *****@Sympatico.ca. I would like to put everything under Local folders but I am unsure if I should do this when there are 2 Outboxes
I spent all day learning some concepts of Samba which I left while preparing for RHCE.One of them is how to permanently mount (fstab entry) windows shared folder.Manually mount command is running fine for me.
I have an issue with the manner in which Network Manager is configuring the network and short of ditching Network Manager I can see no solution.The issue : Getting a machine to update its machine name in the DNS serverSounds simple doesn't it I operate a FreeBSD based firewall / DHCP / DNS server, using a default Network Manager DHCP configuration the Fedora clients do not register their names with the DNS server when they obtain an address.
I have traced the communications with Wireshark and the Fedora clients are NOT supplying the PC's hostname as part of the exchange so this is NOT a DNS server configuration issue. If I uncheck the option 'Automatically obtain DNS information from provider' under the DHCP settings the Fedora clients DO register the hostname that is put into the Hostname (optional) databox. They do NOT however store the DNS server IP address or any other records defined by the DNS server.
Is there some hidden settings or is this a bug because it isn't acceptable 'DHCP' behaviour if it isn't possible to automatically set DNS server IP addresses and at the same time register the hostname during the DHCP negotiation. Before it is said I know I can use a fixed DNS IP address but am not prepared to long term, I am also not prepared to define the Fedora clients with a 'static' IP. I am similarly not interested in playing around with scripts or any other such 'frigs' to achieve what should be a standard activity - registering a host with DNS during the DHCP negotiation.
Ubunu 9.1 and I would like to set up my machine so that when i type a domain name into another browser on my local network, I will get the apache server. I currently access the pages i have on the ubuntu server by typing the ip address into another machine on the network, I would like to type in a DNS type of name instead.
Ultimately, I would like to access this machine from outside of my network over the Internet, and would appreciate insight on how to do this, too.
I would like to be able to have one local user connect to the X of another local user and run an X program. On fedora, I can simply run: $ xhost + And then have the other user run: $ sol --display=0.0
This is not working on my ubuntu (10.10). I am guessing that there is an additional level of Xauth restrictions, but I cannot find out how to get past them. Both users are local to the machine. I would like to not use sux or gdsu as both require you to enter the password and I would like this to be seemless. I am aware of the security concerns and believe that I have mitigated them.
I have a few ubuntu machines in my house, 1 mythtv backend server with other services as well, 2 mythbuntu frontends boxes hooked up to tv's etc. I wanted to push the audio from my laptop out over pulseaudio to the machine connected to the AV equipment.
I could not see any other pulseaudio sinks in padevchooser... this lead me down the road to investigating avahi.
When I run avahi-browse on my laptop (hydrogen) it only returns the services published from itself:
My laptop has vmware on it, and I've changed the vmnet intefaces to not support multicast so avahi ignores them. but I'm still at a loss to why my laptop can't see the other machines on my network with avahi (mdns).
The devices tab under ubuntu one preferences lists only <LOCAL MACHINE> the staus at the top says disconnected, the connect button is grayed out and the reset button at the bottom right does nothing. Files don't sync etc but I think this is as a result of the situation described above. I have tried on the advice of an older thread to delete the token for Ubuntu one from 'passwords and encryption keys' and then revisit Ubuntu one preferences in order to sign in again and grant my computer access but this made no difference.
I have partitioned my HDD to three parts and installed Windows 7 and then Ubuntu 11.04. After a while I installed Hackinosh Snow Leopard grub was not there and whenever I tried to boot to ubuntu from Chameleon bootloader it showed an error and told to press Ctrl+Alt+Delete to restart! I have already tried to restore grub from a Live CD but nothing!
I have a server that is on a high port number, and people want it on port 80. For root exploit issues people say the server can not run as root. So to solve things I want to redirect port 80 to a high port number, say 12345 on the machine. This has been discussed all over the web, so I find I need to do this:
And I do this, an voila things work for the whole world. All machines in the world can see the server on port 80 on the machine.Except, on the machine itself. On the machine 123.45.67.89, I try to get to the server on 123.45.67.89:80, I get a can't connect error. On the machine if I try 123.45.67.89:12345 I can connect.What am I doing wrong here? I don't want localhost network really, I want the ip address and port, but I want the forwarding to work on the local machine. But it doesn't...
I am having trouble with my new Huawei USB modem. It gets detected and lsusb shows me the vendor id and product id as 12d1 : 140b Huawei Technologies Pvt Ltd but the device does not create any entry in /dev/ttyUSB* am i missing something?
I'm running an up-to-date Lucid Lynx but now getting irritated by a bug or problem (I'm not sure whether it's a bug) in Gnome-panels. The problem is whenever I add a new panel in Gnome Desktop, the new panel doesn't appears on screen and needs to be re-logon to appear. It seems a known issue when I checked for the same at Launchpad, but it existed in betas.
I found this trouble since I have made a clean install of Lucid but thought it'll be fixed in any of the updates, but it didn't solved even after the most recent update I made this morning. I wanted to report this bug but didn't knew how to file bug for gnome-panels as there's no option like 'Report a problem' for gnome panels.
I m using the pc as gateway....i have two NICs:1) 10.6.15.254 ---> for internal network 10.6.15.02) 10.6.0.115 -----> for out side world I can ping and ssh any out side machine but when i try to ping or ssh any machine in the 10.6.15.0 network it says host unreachable.... i can ping and ssh gateway i.e. 10.6.15.254 and 10.6.0.115 but not the client machine in the 10.6.15.0 network from out side world even i flush iptable rules i can not access any client machine i m using ubuntu 10.04 as operating system..
I tried to authenticate using ntlm proxy authentication service and my computer could not retrive the IP address. Currently I am using fedora cammbridge
I have a reverse ssh connection established from a remote machine to my local machine - it is established with autossh from the remote machine - I know it is connecting because I can see the two ssh processes on the local machine - and, when I kill the two ssh processes, two new ssh processes are immediately established. But I cannot login to the port on the local machine. I have tried everything - it simply refuses to connect. This remote machine is miles away and not readily accessible.
Code: ssh -p 7766 -vvv user[at_sign]192.168.1.108 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0
[Code]...
I'm wondering if there is some way I could utilize netcat or socat to "tap into" this connection from my local machine??? (My ultimate goal would be to get to a shell on the remote machine.)
I just installed Ubuntu on my windows pc with no problems....except for wireless that is. I have a USB Linksys WUSB54G adapter to access my 2WIRE, WEP network. The thing is, it shows up in the top right hand corner. It even gives me the signal strength. But when it comes to using Mozilla, it is never able to access a page. If I try to Ping something, it's unable to. So I thought maybe I need to use ndiswrapper with my .inf and .sys files from the driver for my windows. I installed it, and added the driver to it...everything went O.K. I check it and it says it's installed and working. Again, I can see the wireless networks, and "connect" but when I try to use the connection there is nothing. I have also tried my neighbours non-WEP connection, but it still doesn't work. So I'm sort of at a loss with what I should do now. I see the networks, can "connect" but can't browse. I installed the drivers from my windows, and it still doesn't work. I used a LIVE CD of Knoppix and I can connect to the Network within 30 seconds and start browsing the net.
