I have a bunch of .u1conflict files, and I removed the files having incomplete content and renamed some conflict files to remove the extension. However, the conflict files recur.
View 1 RepliesI recently had a Windows Vista laptop crash and burn because of some damage done to all the lovely files Windows cannot boot without. Since my computer cannot boot from USB normally I used PloP Bootmanager to get it to boot from a live Ubuntu image on a USB stick.Before I install Ubuntu, I want to recover some of my files sitting on the disk, and the partitions seem to mount in the GUI- I can see them, I can click mount or unmount and it responds. The trouble is that while I can see all of the folders on the Windows partition: Program Files, Documents and Settings, etc. I can't see any of the actual files. The disk itself is reported to have data on it- even Ubuntu recognizes it's almost full, but every folder has 0 files with the exception of /media/[A particular character string] which has three boot-related files. This is true whether I use bash as root or not. I've tried mounting to a different point and remounting via the terminal using ntfs-3g and editing the fstab file to recognize the parition with full permissions, but nothing seems to work.
View 5 Replies View RelatedI am working on a system that uses Red Hat Client 5.3. Files keep being created all over the system. They are all named nul and are zero length. We use a common login and thy are owned by this login account. I have grep'd the entire system looking for some code that would be writing these files but nothing has come up.
View 2 Replies View RelatedWhat should I do to keep important files on my computer from being uploaded to the internet? Don't I need an outbound firewall to prevent this?
What causes my computer to send an outbound request to the internet that would result in files being uploaded from my computer onto the internet? I'm afraid to put anything of importance (like reports that I've written for work) onto a computer with internet access because I don't want them to be uploaded to the internet. I wouldn't upload them on purpose obviously, but I'm afraid it would happen without my knowledge because I don't know what I'm doing.
I have an intermittent issue with with Samba. I can access my samba share with windows xp and vista using windows networking and even by mapping the share to a drive. The problem is that the files and folders disappear inadvertently and I can only access them again if I open the share again from the start with windows explorer. Selinux is disabled and the firewall ports for samba are open. The following software is installed:
samba 3.0.33-3.15.el5_4
samba-client 3.0.33-3.15.el5_4
samba-common 3.0.33-3.15.el5_4
[code]....
I have ssh installed, using port 22. I installed apache2, and forwarded port 82 to 80. For some reason, the following message occurs when connecting to IP:
82: SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2
I can view my page file through things like http://localhost.
Just did a fresh install of Kubuntu 10.04. I use Gedit as my primary text editor. When I was running 9.10, I was able to map shortcuts in Gedit for code snippets and use them without any problems. Now, in 10.04, when I map shortcuts in Gedit, as expected my WIN key is recognized as SUPER (which is how it was in 9.10). But for some reason, KDE now has that key mapped as META. Which means I can set the correct shortcut in Gedit, but can't ever use it because KDE seems to think there is no SUPER key.
I've tried every conceivable option in System Settings > Regional & Language > Keyboard Layout > Advanced > Alt/Win Key Behavior. Nothing works. I've also tried various combinations of enabling/disabling keyboard layouts altogether, and switching keyboard models. No luck so far... What's so mind-boggling is that this all worked flawlessly in 9.10. I must've screwed something up recently, but I have no idea where to look...
After a long time of happy Skyping, I now seem to have picked up a conflict. When I try to open Skype 2.1 Beta which is the one on Ubuntu that I have been using, the login fails. The message is that there is possibly another version of Skype already in operation. I went to the Skype site and changed my password, then I connected via the Skype website, no problem, but with straight Beta. This works fine, but when I exit Skype, I have to re-connect via the website again, the version on my system is unable to connect, apparently due to the presence of the other version.
View 5 Replies View RelatedFrom time to time I have to close Opera in order to regain the ability to use Totem or VLC (perhaps others). I'll explain. Normally everything is fine, but from time to time I will open Movie Player (Totem) and it will attempt to load whatever I have sent to it and it will vanish (crash). I can attempt to send anything to it and the same problem occurs (audio or video; mp3, flac, avi, &c). I can test the same problem with VLC and the same results occur (vanish/crash).
If I close Opera (and optionally restart it), I again can use Totem and VLC. I have tried merely killing Opera's plugin wrapper (thinking it was perhaps related to a plugin seizing PA), but this does nothing for the matter. (Of course killing Opera does as this is more or less the same as closing Opera.)
I need to install some packages, but it fails because I previously installed gnome-shell testing, and now have the ricotz ppa packages conflicting with the default packages. See error below.
Code:
libgtk2.0-dev:
Depends: libgtk2.0-0 (=2.20.1-0ubuntu2) but 2.20.1-0ubuntu3~10.04~ricotz2 is to be installed
Depends: libpango1.0-dev but it is not going to be installed
Depends: libatk1.0-dev but it is not going to be installed
How do I remove these packages and re-install the default ones, without risking damage to my system?
UPDATE: I have now tried to remove this packages using ppa-purge and the new ubuntu tweaks, but for the life of me I cannot get rid of them.
What happen if we assign a static IP address to both linux and windows host?Consider host A is a ubuntu machine and host B is a windows machine. I first set a static IP for host A (W.X.Y.Z) and connect to it through ssh. Then I duplicate that IP for host B (W.X.Y.Z).The result was that I could no longer connect to the ubuntu machine!
View 9 Replies View RelatedI've updated to Maverick and I'm running Gnome Shell at login, the version from the repos.
My problem is that Tomboy in the tray does does not list the titles of my notes. There's just the yellow note icon. The rest of the text (Synchronize, Preferences, etc) all work normally.
If I log in to the normal Ubuntu desktop, there is no problem with Tomboy.
Trying to install from a 10.04.1 Lucid LiveCD. The computer is pretty old but has Windows XP installed on it currently, which runs. (So it can't be that old!) I boot up and press F6 and I get the screen. When i try to install I get the Ubuntu logo with the 5 white/red dots and there is movement. The activity light on the CD drive flashes regularly and chugs along. At a certain point the screen attempts to change resolution or something and it goes all cyan and messed up. I assume that this is at the point where it attempts to load the graphical disk partition utility or whatever. Is there a way to pass a command line option at the install menu to make it a text only install or at a lower resolution? I'm not sure if it's trying to jump to the default IDID (or whatever it's called) resolution of the LCD monitor, since the video card may not support that resolution or something. (Because the video card is much older than the monitor).
View 1 Replies View RelatedI've installed Gloobus Preview and It can be launched in Applications>Accessories>Gloobus Preview.
If I click something like a JPEG and hit spacebar it opens the pic in Shotwell, not Gloobus Preview. Do I need to change settings or something?
Ubuntu 10.10 Maverick
Having issues with external display, I have to start compiz everytime I log in
View 2 Replies View RelatedI have installed OpenMPI from ubuntu repository. However some users need openMp. The problem is I didn't find that in ubuntu repository. Where can I found deb packages? If I must install from source, then is there any conflict between openMp and openMPI?
View 4 Replies View RelatedDo you see any conflict when the Bus Id of the GDU is 06:04.0 (inboard Matrox) and the Bus Id of an audio card is 04:04.0 (Xonar DX) ?
View 8 Replies View Relatedtoday i tried to install clam antivirus for my fedora ... i used the following command: yum install clamav it shows the following error message: Error: clamav-data-empty conflicts with clamav-data how to rectify this..
View 3 Replies View RelatedI am running fedora12 in my machine and used virtualbox. I have 3 virtual machine running linux, xp and fedora as well. I have used linux as my gateway and configured NAT for my xp and fedora machine which is under the ip of 192.168.1.0 network.. Everything is fine but often i get error message in my xp machine that says 'there is an ip address conflict'.I just wonder there are only 2 machine on that network and how can there be a ip conflict(i have used a static ip for xp and fedora virtual machine).My ip address for linux is (192.168.5.x and 192.168.1.101). XP (192.168.1.1). Fedora (192.168.1.50).
View 5 Replies View RelatedIn application udp port listening with 3330 i am sending udp request from port 0.0.0.0:3330 to 0.0.0.0:3330 that is same port in the same machine....application works fine udp sending and receiving also fine.....for clarification ....is there any conflicts in the communication ?
View 2 Replies View RelatedI just upgraded Firefox from updated yet ancient version 3.0.17 to modern 3.6 using Firefox-stable repository March 15, 2010 update: Firefox 3.6 works perfectly on Hardy 8.04 using firefox-stable repository Quote: Originally Posted by OUTDATED INFORMATION SINCE THE BUG WAS FIXED I ran into two problems.
1. Firefox packages conflicted. I had to manually force-remove firefox-3.0 to install firefox-3.6.
2. Firefox 3.6 was not able to start. It was giving some kind of an error message. I worked around the problem by creating a new profile. but my old 3.0 profile with all my stored passwords, bookmarks, etc is unusable in 3.6
When I use Rhythm Box for any length of time, my Ethernet connection won't work until I shut down the computer and start it up again after several minutes.
View 5 Replies View RelatedI have noticed that lately when I drag a file into another folder to replace a file of the same name, nautilus crashes. I need to restart nautilus to fix this. I can copy and paste to replace the file without a problem though.
View 2 Replies View RelatedI recently followed instructions from here to enable fetching Bing wallpapers from the webIt does woanually, however, when I try it with cron, I get the following:Quote:
PHP Warning: file_get_contents(bing): failed to open stream: No such file or directory in /home/anthony/bing.php on line 28
rm: cannot remove `bing': No such file or directory
[code]....
using compiz under Ubuntu 10.4 on an eeepc, with all its rotating cube lovliness. All was well until I used the eeepc for a presentation and used the "monitors" app from the System -> Preferences menu. Now none of the compiz effects work. how to get compiz working again?
View 4 Replies View RelatedI have been using this program for about 2 months now, but all of a sudden yesterday, it doesn't not show up on PS3. I check on my computer and it is frozen. I close it and try to restart. From then on, it never comes back. It seems like it wants to (the tray icon wants to appear but quickly disappears). I check on System Monitor and Java is running (when you hover over it it lists the program) but in the Waiting Channel it is the only program that says futex_wait_queue_me. It is also the 2nd highest memory user (49 MiB). I have done a lot of different things. Tried getting the latest beta release (which did make it pop up but would never start), I installed the new debian package (when it installed it said pms was already running), uninstalling and reinstalling JDK 6. Nothing works. I don't know what in the world would cause it to do this. It was like fine one minute, dead the next. I've tried other servers (Mediatomb won't let me access some of my drives and PS3 doesn't see it, I MythTV's front and backend stuff is way confusing).
View 1 Replies View RelatedAccording to the Wiki about Xinerama
Quote:
As of the 1.10 X server release, the Xinerama rendering multiplexer and Composite extensions no longer conflict.[URL].. So does this mean that if I use X 1.10 or later, Xinerama and composting can work even over two GPUs and four monitors?
When booting, the grub menu appears and allows me to boot from the internal hard disk (sda) any OS there, such as WHEEZY (sda9). On the external disk (sdb) there is a dd'd copy (not an installation) of SQUEEZE (sdb1), which at one time was on sda but which has different partition assigments listed in its grub.cfg than the current ones shown below for sda.
Code:
Select allNAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 111.8G 0 disk
├─sda1 8:1 0 23G 0 part
├─sda3 8:3 0 1K 0 part
├─sda5 8:5 0 3.9G 0 part [SWAP]
├─sda6 8:6 0 11.7G 0 part
├─sda7 8:7 0 19.5G 0 part /home/norman/data
[code]....
Can I manually boot the SQUEEZE copy on sdb1 using grub commands (set, linux, initrd, boot) without disturbing the WHEEZY and other OSs on sda? Or will they be disrupted?Alternatively if for example JESSIE is installed in sdb3, for example, can it be booted similarly without affecting the installations on sda? I hesitate to try this by trial and error because of the work and time involved in rebuilding messed-up OSs to their desired configurations.
I installed codecs for playing songs and movies.but when I tried to play few songs,it says the corresponding codecs need to be installed.after resolving dependencies,it says the following, Local conflict between packages Two packages provide the same file. This is due to mixing packages from different software sources
Test Transaction Errors: file /usr/lib/gstreamer-0.10/libgstdeinterlace.so from install of gstreamer-plugins-bad-0.10.11-4.fc11.i586 conflicts with file from package gstreamer-plugins-good-0.10.15-4.fc11.i586
file /usr/lib/gstreamer-0.10/libgstflv.so from install of gstreamer-plugins-bad-0.10.11-4.fc11.i586 conflicts with file from package gstreamer-plugins-good-0.10.15-4.fc11.i586
[code]....
I installed 11.2 on VMware 6.03. My os is windows 7.When I try to go online a pop up showed up
View 1 Replies View Related