Ubuntu :: How To Resolve Third-party Ppa Packages Conflict

Aug 15, 2010

I need to install some packages, but it fails because I previously installed gnome-shell testing, and now have the ricotz ppa packages conflicting with the default packages. See error below.

Code:

libgtk2.0-dev:
Depends: libgtk2.0-0 (=2.20.1-0ubuntu2) but 2.20.1-0ubuntu3~10.04~ricotz2 is to be installed
Depends: libpango1.0-dev but it is not going to be installed
Depends: libatk1.0-dev but it is not going to be installed

How do I remove these packages and re-install the default ones, without risking damage to my system?

UPDATE: I have now tried to remove this packages using ppa-purge and the new ubuntu tweaks, but for the life of me I cannot get rid of them.

View 2 Replies


ADVERTISEMENT

Red Hat :: How To Remove 3rd Party Packages

Apr 7, 2011

I installed a LAMP server using RHEL 5.5 but we needed a higher version of php than was available in RHEL Yum repositories. I think at the time I installed Dag Wieers and got a 3rd party package. My question is the following:

1. How do I remove the 3rd party packages?
2. How do I remove Dag Wieers from my Yum repo list?
3. Anything else I need to know to get all 3rd party packages off?

View 1 Replies View Related

Slackware :: Get Third Party Packages?

May 9, 2010

as the subject says, what is your source for non official packages for slackware?? slacky.eu, sbo, others??

View 14 Replies View Related

Slackware :: Keep 3rd Party Packages Updated?

Feb 27, 2011

I am using SBOpkg, but for the ~30 3rd party packages I have most of the slackbuilds are already out of date, and I don't expect they will be updated when security issues or whatever arise.

So is the only solution to subscribe to the individual mailing list for each piece of software, or is there a more automatic way?

View 5 Replies View Related

Slackware :: 3rd Party Repos And Sharing Homemade Packages

Aug 1, 2010

half the fun of running Slackware is how easy it is to make Slackware packages from source! I know there are many, many unofficial Slackware repos

[Code]....

View 4 Replies View Related

Fedora :: Get Rid Of Conflict Packages?

Nov 19, 2009

today i tried to install clam antivirus for my fedora ... i used the following command: yum install clamav it shows the following error message: Error: clamav-data-empty conflicts with clamav-data how to rectify this..

View 3 Replies View Related

Fedora :: Local Conflict Between The Packages?

Sep 19, 2009

I installed codecs for playing songs and movies.but when I tried to play few songs,it says the corresponding codecs need to be installed.after resolving dependencies,it says the following, Local conflict between packages Two packages provide the same file. This is due to mixing packages from different software sources

Test Transaction Errors: file /usr/lib/gstreamer-0.10/libgstdeinterlace.so from install of gstreamer-plugins-bad-0.10.11-4.fc11.i586 conflicts with file from package gstreamer-plugins-good-0.10.15-4.fc11.i586
file /usr/lib/gstreamer-0.10/libgstflv.so from install of gstreamer-plugins-bad-0.10.11-4.fc11.i586 conflicts with file from package gstreamer-plugins-good-0.10.15-4.fc11.i586

[code]....

View 1 Replies View Related

Ubuntu :: Upgrading To Firefox 3.6 On Hardy 8.04 - Packages Conflict

Jan 26, 2010

I just upgraded Firefox from updated yet ancient version 3.0.17 to modern 3.6 using Firefox-stable repository March 15, 2010 update: Firefox 3.6 works perfectly on Hardy 8.04 using firefox-stable repository Quote: Originally Posted by OUTDATED INFORMATION SINCE THE BUG WAS FIXED I ran into two problems.

1. Firefox packages conflicted. I had to manually force-remove firefox-3.0 to install firefox-3.6.

2. Firefox 3.6 was not able to start. It was giving some kind of an error message. I worked around the problem by creating a new profile. but my old 3.0 profile with all my stored passwords, bookmarks, etc is unusable in 3.6

View 5 Replies View Related

Fedora :: Installing Cinelerra In F13 - Local File Conflict Between Packages

Sep 16, 2010

When I try to install Cinelerra I get this error:
Local file conflict between packages
Two packages provide the same file. This is usually due to mixing packages from different software sources.

Test Transaction Errors: file /usr/bin/mpeg3cat from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3dump from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64
file /usr/bin/mpeg3toc from install of cinelerra-2.1-20_git20091116.fc13.x86_64 conflicts with
file from package libmpeg3-utils-1.8-3.fc12.x86_64

View 2 Replies View Related

Ubuntu :: Can't Update Packages Due To Some Fail Conflict Between Pidgin And Pidgin-facebookchat

Jan 5, 2011

I have a Kubuntu 10.10 install on which I can't update my packages due to some fail conflict between pidgin and pidgin-facebookchat. I can't even remove the stuff via apt-get due to this conflict...

sudo apt-get remove pidgin
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:

[Code]...

View 3 Replies View Related

Fedora :: Cant Update Get A Message That Says "Local File Conflict Between Packages"?

Oct 10, 2009

I have not been able to update in over a month. I get a message that says "Local file conflict between packages"
When I click on More Details, I get:

Test Transaction Errors: file /etc/fonts/conf.avail/25-unhint-nonlatin.conf from install of fontconfig-2.7.1-1.fc11.x86_64 conflicts with file from package fontconfig-2.6.99.behdad.20090508-1.fc11.i586
file /etc/fonts/conf.avail/30-metric-aliases.conf from install of fontconfig-2.7.1-1.fc11.x86_64 conflicts

[code]....

View 14 Replies View Related

OpenSUSE :: Zypper Won't Download Any Packages / Resolve This?

Jul 8, 2011

Zypper seems unable to reach the openSUSE servers. I am currently on a network that may or may not block certain traffic, so I don't know if their firewall is in the way. I am able to browse the web without any problems. Sometimes Zypper downloads proceed eventually, but the download is doggone slow. I did this code...

Apparently Zypper has trouble downloading this URI, but if I open it in Chrome it loads perfectly without any problems. How can I find the root of this problem?

View 9 Replies View Related

Ubuntu :: Recurring Failure To Resolve Openoffice Dependencies - Possibly Due To Held Packages

Feb 16, 2011

Distro: Ubuntu 9.10 (partially upgraded to 10.04)

Terminal log below:

In addition, I was unable to uninstall libreadline5 (since I already have libreadline6 installed).

It appears that libreadline5 may be the source of this problem with dependencies.

View 2 Replies View Related

General :: Pass List Of Packages To Aptitude And Resolve Conflicts?

Jun 20, 2011

How do I pass a list of packages to aptitude so that I can resolve the conflicts interactively?

View 1 Replies View Related

Ubuntu Installation :: Update - Error - PkgProblemResolver:Resolve Generated Breaks - This May Be Caused By Held Packages

Oct 10, 2010

I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages

I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...

View 8 Replies View Related

Ubuntu :: 3rd Party Links Not Working?

Aug 7, 2010

Links from third party applications do not work any more. When I go to click on links from PDF,s or from Pino or KeePass nothing happens. I've tested different browsers Opera, Chrome, Midori etc same thing links just don't work from third party apps.

[URL]

View 3 Replies View Related

Ubuntu :: Third Party Icons On Launch Bar

May 3, 2011

I recently installed Windows Bookshelf through Wine and although the Bookshelf Icon appears in Applications, I cannot drag and drop it onto the new Unity Launch Bar in Ubuntu 11.04 (Natty Narwhal). Is there a way of adding Icon's of this nature to the Unity Launch Bar?

View 1 Replies View Related

Red Hat :: Add 3rd Party Repositories To YUM?

Apr 21, 2009

I normally add RPMFORGE / DAG to my RHEL 5 machines however I have a server and I can't remember if I added the repository to the machine so I was wondering how someone can check on the server if I have added this in the past. I know that in Debian / Ubuntu, I am able to cat /etc/apt/source.list and see the repository listed.

View 1 Replies View Related

Ubuntu :: Bluetooth Gpsd - Rfcomm - 3rd Party App ?

Jul 6, 2010

System Details:

Code:

Things I have tried so far:Followed tutorials found here at [url] and [url] None of which worked.

Some output from what appears to be a valid connection:
I have run sdptool browse and found my device
I have used hcitool scan and found my device
I have done a cat of /dev/rfcomm0 and seen data streaming
I have seen a process id for gpsd as well as seen a listneing port for gpsd
I have been unable to get either gpsdrive / xgps / tangogps to see gpsd. All report it as not running.

View 3 Replies View Related

Ubuntu Installation :: Disable Third-party Repos From The CLI?

Nov 5, 2010

I am looking to upgrade a box of mine using command line only. I am going from 10.04 to 10.10 and have changed all instances of lucid to maverick within the sources.list file but now I don't want to continue until I can be safe to upgrade by disabling the third-party repos. How can I disable these using the command line? Should I just move the sources.list.d folder? Any other ways I'm missing?

View 4 Replies View Related

Ubuntu Installation :: Automatically Add Third Party Ppas?

Jun 4, 2011

every time i install ubuntu i have to add official ppas of many softwares like transmission, libreoffice. vlc, deluge and many other softwares i use. is there any script or software that will allow me to create my own list and set up the ppas when i run it?

View 1 Replies View Related

Ubuntu Installation :: Unattended Upgrades And 3rd Party Repos

Jul 14, 2010

I have searched on the internet but didn't manage to find out how to flag 3rd party repositories in /etc/apt/sources.list.d/50unattended-upgrades. It installs all updates from the stock Ubuntu repos but none from 3rd party repositories I later added (e.g. Chromium PPA, Skype, etc.). I understand I have to manually add the lines but I'm not sure what's the format for this. How to do this? Here's how my 50unattended-upgrades file looks like:

Code:
// Automatically upgrade packages from these (origin, archive) pairs
Unattended-Upgrade::Allowed-Origins {
"Ubuntu karmic-security";
"Ubuntu karmic-updates"; };

// List of packages to not update
Unattended-Upgrade::Package-Blacklist {
//"vim";
//"libc6";
//"libc6-dev";
//"libc6-i686"; };

// Send email to this address for problems or packages upgrades. If empty or unset then no email is sent, make sure that you have a working mail setup on your system. The package 'mailx' must be installed or anything that provides /usr/bin/mail.
//Unattended-Upgrade::Mail "root@localhost";
// Automatically reboot *WITHOUT CONFIRMATION* if a
// the file /var/run/reboot-required is found after the upgrade
//Unattended-Upgrade::Automatic-Reboot "false";

View 5 Replies View Related

Ubuntu Installation :: Apt-get Update Is Ignoring 3rd Party Repositories?

Aug 10, 2010

Something weird happening today with a new 10.04 LTS server install.apt-get update is ignoring 3rd party repositories

Code:
xbmc@xbmc-HTPC:~$ sudo add-apt-repository ppa:team-xbmc-svn
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv A292248FCB9CFB8689A30B7A2BBD133164234534
gpg: requesting key 64234534 from hkp server keyserver.ubuntu.com

[Code]...

I just tried adding the same repository to my desktop pc as well separate install separate machine same error, while checking software sources in gnome nothing seems out of the ordinary. My desktop was updated today via the update manager.

View 4 Replies View Related

Ubuntu :: Run Apt-get Install -f In A Terminal After Unchecking 3rd Party Updates?

Feb 16, 2011

I ve got updates ready to install but halfway through downloading I get a message saying it couldnt get a password or something. So I enabled unsupported updates, but it still did it.

So then I disabled them again and it said I had a broken package (ia32-libs) and to run apt-get install -f in a terminal after unchecking 3rd party updates, so I unchecked 3rd party updates, but when I type in a terminal it says permission denied and asks if I m root.

It would normally ask for a password in the terminal to root me, dont know how to do it any other way.

View 2 Replies View Related

Ubuntu Installation :: Enabling Third-party Software Sources?

Apr 29, 2011

I upgraded to 11.04, and in the process it said third-party software sources needed to be disabled.Now, when I go into Software Sources nothing happens (the form doesn't open up)Is there a command line prompt to enable third-party sources? I think this might be why my keyboard/mouse aren't working.

View 1 Replies View Related

Ubuntu Security :: Not To Send Any Data To Third-party-users

May 18, 2011

As I'm interested in user-behaviour-information-security I would like to know what I�ll have to turn off or to uninstall to make the ubuntu-pc-usage as anonymous as possible (no musicbrainz, cddb, or alike).I want ubuntu not to send any data to third-party-users.

View 6 Replies View Related

Fedora :: 15 - Install 3rd Party Repos ?

May 25, 2011

just installed Fedora 15 and was just wondering....

I want to install the 3rd party repos... I found these........

[url]
[url]

But for 15... would I install the rawhide one for rpmfusion? cause the other options are for older Fedora's.... or is there an updated rpmfusion etc for Fedora 15 that hasn't arrived yet? How does it work in this regards so I can have up to date 3rd party packages etc?

View 2 Replies View Related

Networking :: Setup OpenVPN To Use A Third Party CA?

Mar 31, 2010

I'm trying to setup OpenVPN to use a third party CA, and its unclear to me how to use the serial and index.txt files that are created when one uses the easy-rsa scripts to setup OpenVPN. If i'm using my own CA can I ignore those? Its also unclear to me how OpenVPN figures out the server.key passphrase. I'd also like to leverage the --tls-verify cmd directive but I am unsure of where to specify it.

What I would like to do is have --tls-verify call a perl script that then verifies that the CN of the certificate the client is passing in matches a cn in an LDAP group. I figure I can do the LDAP group lookup with some easy perl stuff, its unclear to me though if --tls-verify is going to pass in the RDN of the client cert.

View 2 Replies View Related

Ubuntu Multimedia :: ITunes Store Access - Third Party Extension

Jan 4, 2010

I got about 30 bucks worth of iTunes giftcards I'd like to redeem, but Apple doesn't have iTunes support for linux. I installed it via wine, but I can't get the itunes store to open up. I've been trying for several hours to get a workaround, with no success, as follows:

1) iTunes on Wine (didn't work, like I said)
2) Sharp Musique (old thread, all the links were broken and it's not in my Synaptics repos)
3) Banshee iTunes Store extension*****

This last one with Banshee seems promising, but I'm getting nowhere. I've downloaded the third-party extension, installed the .deb, and followed the directions on the banshee webpage. Still, when I go under Edit>>>Preferences>>>Extensions, it doesn't show up. I found the install called "iTunesMusicStore.dll" in /usr/lib/banshee/Banshee.Plugins, and I've moved it to ~/.config/banshee-1/addin-db-001/addin-data, but it still won't show up in the plugins.

View 4 Replies View Related

Ubuntu :: Generic Philosophy - Third Party Application Version Management?

Jun 16, 2010

Even though I have been using Linux for quite some time now (as a private web server), now that I want to create a new web server, I am willing to know exactly what is the philosophy of Ubuntu regarding package version management.

Let's use phpBB as an example, as I used it on my first server, and I intend to use it again on my new one. phpBB is currently in version 3.0.7 In the official Ubuntu software repository, phpBB is currently in version 3.0.4 Now I am facing a philosophical question: should I simply download the official version and simply deal with it, or is it more 'the Ubuntu philosophy' to stick to the 'supported' version, 3.0.4, even though, this version is a year and a half old?

I know that Ubuntu is based on Debian, which is itself a very secured Linux, which will only offer validated versions of software. And as such, man should not expect to always see the latest versions available. However, I am now wondering, is it better, security-wise, to stick to the 'validated' 3.0.4 or to go use the original 3.0.7? Because as all the holes of 3.0.4/5/6 are now known, I am not quite sure that sticking to 3.0.4 is for the best.

Now it came to my mind that the philosophy might simply be to use APT to get the latest valid version, and then to simply use the internal upgrade tool of phpBB to upgrade to 3.0.7. But as the phpBB as it is available for Ubuntu is really modified, in terms of files being splitted in many different folders, will the automated upgrade work?
And what will happen when Ubuntu will upgrade their version? What happens if they upgrade to a lower than latest version? Or to the latest (not even sure this would happen one day)? phpBB has an integrated upgrade feature, but what about all this for a software that doesn't have such a tool (MediaWiki for instance)?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved