Ubuntu Multimedia :: Rhythmbox And Ethernet Connection Conflict
Sep 26, 2010When I use Rhythm Box for any length of time, my Ethernet connection won't work until I shut down the computer and start it up again after several minutes.
View 5 RepliesWhen I use Rhythm Box for any length of time, my Ethernet connection won't work until I shut down the computer and start it up again after several minutes.
View 5 RepliesI would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
Whenever I plug my Zune in, Rhythmbox recognizes all the songs on it but when I doubleclick on a song to play it, the song doesn't play and Rhythmbox quits. Any suggestions on how to fix it? I'm running a Dell XPS 410 with 4GB RAM and a 1.75 GHz processor.Also, I imported a CD and it plays fine.
View 1 Replies View RelatedI have been using this program for about 2 months now, but all of a sudden yesterday, it doesn't not show up on PS3. I check on my computer and it is frozen. I close it and try to restart. From then on, it never comes back. It seems like it wants to (the tray icon wants to appear but quickly disappears). I check on System Monitor and Java is running (when you hover over it it lists the program) but in the Waiting Channel it is the only program that says futex_wait_queue_me. It is also the 2nd highest memory user (49 MiB). I have done a lot of different things. Tried getting the latest beta release (which did make it pop up but would never start), I installed the new debian package (when it installed it said pms was already running), uninstalling and reinstalling JDK 6. Nothing works. I don't know what in the world would cause it to do this. It was like fine one minute, dead the next. I've tried other servers (Mediatomb won't let me access some of my drives and PS3 doesn't see it, I MythTV's front and backend stuff is way confusing).
View 1 Replies View RelatedAccording to the Wiki about Xinerama
Quote:
As of the 1.10 X server release, the Xinerama rendering multiplexer and Composite extensions no longer conflict.[URL].. So does this mean that if I use X 1.10 or later, Xinerama and composting can work even over two GPUs and four monitors?
I'm running debian 2.6.32-5-amd64 and have spent an interesting day trying to get nvidia-glx running...What appears to be happening, is that installing nvidia-glx uninstalls X.I've tried various installation methods (Synaptic, apt-get, module-assistant) and the final result seems to always be /usr/bin/X not found.Re-installing X blows away nvidia-glx.The symptoms look a lot like this post: viewtopic.php?f=7&t=45188Is it possible that this problem has returned?
View 10 Replies View RelatedI have Xfce installed on wheezy, and I was planning on installing some KDE components for kicks. When I tried to install kdebase-workspace I got this error from aptitude The following NEW packages will be installed:
[Code]...
The following packages are RECOMMENDED but will NOT be installed: kinfocenter plasma-scriptengines policykit-1-gnome polkit-kde-1 upower 0 packages upgraded, 30 newly installed, 0 to remove and 49 not upgraded.
Need to get 78.5 MB of archives. After unpacking 137 MB will be used. The following packages have unmet dependencies: xfce4-notifyd: Conflicts: notification-daemon but it is not going to be installed.
If it's not going to be installed, then where is the conflict? I've seen "Depends: X but it is not going to be installed", which makes sense. The only solutions are to remove xfce4-notifyd or to keep most of the KDE stuff uninstalled. apt-get also wants to remove xfce4-notifyd. Edit: Ok, it looks like both plasma-widgets-workspace and xfce4-notifyd provide notification-daemon, but I still don't understand why the aptitude error doesn't tell me that xfce4-notifyd conflicts with plasma-widgets-workspace instead of notification-daemon.
I'm using pulse audio sound server in opnsuse 11.3 and latest version of flash player, The problem is playing video or sound with flash player in firefox, Once I play something in firefox sound output it seem like closed to other applications like amarok.
View 3 Replies View Relatedhow to use a ethernet conenction(Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller )in ubuntu...my internet requires user name and password ..can u even tell me how to config the user name and password
View 3 Replies View RelatedI installed 10.04 today, and I can't get any connection through the LAN. I've tried some stuff on my own, but I've been unsuccessful so far. It's not a hardware or connection issue, as it works perfectly fine in Windows 7. I haven't had this issue in any previous version of Ubuntu (or any Linux distro for that matter).The weirdest part is I booted from the installation CD as as LiveCD, and everything worked perfectly fine. It only stops working after I actually install it. Here's the results of ifconfig:
eth0 Link encap:Ethernet HWaddr 00:17:31:d8:d5:76
inet6 addr: fe80::217:31ff:fed8:d576/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
could not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
View 9 Replies View RelatedWhile trying to install the amazon mp3 downloader I got this package installer message : "Error: Dependency is not satisfiable: libboost-filesystem1.34.1" Amazons ubuntu version of this downloader is for the 9.04 version and not the10,04 LTS which I am using.
View 9 Replies View Relatedi shut down my ubuntu karmic for a bit. turned it back on after an hour or so and now i have no network connection. i checked all the obvious things like cords etc wife's computer is connected through the same router / modem and no probs here.i even replaced the card in mine.
View 9 Replies View RelatedI just upgraded to 10.04. I had wireless connection for 1 day and now nothing. No ethernet connection either. I CAN use both wireless and ethernet using my machine on Windows.....so the connection stuff does work. Here's the output of of the commands I got from the "sticky". I can't display the output as this forum puts it all together as one continuous sentence with no line break!
View 9 Replies View RelatedI'm trying to set up a shared Internet connection that had been broken by a previous update, I believe. Eth0 is connected to the Internet, whereas eth2 should be the connection going to my Roku set-top box. Under the nm-applet icon, an entry exists for "Auto eth0" for the first card, but there is nothing under the second card except "disconnected". How do I make a connection entry under my eth2 card so that I can share my Internet connection with my Roku box?
View 6 Replies View RelatedI have a 64bits laptop with dual boot (Vista + Ubuntu 9.10) and nVidia chipset. Earlier, I could connect to internet using both the OSs. But now, when I insert the network cable (RJ-45) in the network port, neither of the OSs recognises the network cable. When I click (left click) the network icon in ubuntu (in the right top corner of the desktop), it does not show any available ethernet connection.
I checked in BIOS also there is no mention of network card. Following are the details of the laptop:
eth0 Link encap:Ethernet HWaddr 00:22:20:06:ac:19
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]...
When I start my Ubuntu machine, it says "eth0 connection established". But i could not able to ping to other machines available in LAN & also to Internet.
View 1 Replies View RelatedI just built my first pc, installed ubuntu 9.10 and tried connecting to the net through my ethernet cable and all that happens is it says cannot find server. Do I need to install network settings & if so what & where,or should it automatically detect them? As this is my first build I am a novice but am willing to listen & learn.
View 3 Replies View Relatedi've just got a new broadband/wireless connection from Virgin Media and am trying to get this very old laptop online. in the past, cable connections have been easy, and wireless has given issues, but this time its the opposite. so, i have a new cable connection that is all plugged in. called customer support, they have no support for linux as usual, but they 'manually activated' the modem and thats all they can do. i am not trying to setup the wireless network yet, i'll do that with a pc later, for now i just want to plug in and go. on Network Settings, i have set the wired connection to dhcp. thats what i've done before ... not sure if i need to get static addresses from the ISP? i can go online now using the erratic but generous neighborhood free wireless.
ifconfig -a gives:
Code:
ath0 Link encap:Ethernet HWaddr 00:14:A4:1E:3E:65
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::214:a4ff:fe1e:3e65/64 Scope:Link
[code]....
Following upgrading my 09.04 partition to 09.10 then 10.04, all was working fine until I tried hibernate out for the first time - big mistake! If I can get to a position where i can log on to the system, I find that my ethernet network connection is disabled and I cannot get it to restart. My 09.10 system still works ok. I am tempted to do a clean install of 10.04, even though I'll have to spend some time reloading the extra's and re-configuring.
View 1 Replies View RelatedI just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run
Code:
ifconfig eth0
the result is
Code:
no such device
The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.
I have a HP Mini running Ubuntu Desktop 10.04, and I cannot get a wired connection to work. My network card is "Broadcom Corporation BCM4312 802.11b/g (rev 01)", and I have the restricted drivers for the card installed. Wireless works fine, though.
My /etc/network/interfaces:
I am trying to run a cable from my wireless router over a 75ft cat6 cable to my bedroom. I don't get any connection on my end and I don't have any other ideas. I did setup a m0n0wall box just to try. I got the network led on my server to light up in my room but nothing more than that. Lastly, I tried adding a 5 port switch in my room and then connecting that to my server and nada.
View 4 Replies View RelatedAfter some fiddling around, I have come to the conclusion my current wifi access point hates my other computer's Broadcom chip or the drivers thereof. So, my current idea is as follows. I would like to use my netbook to connect to the wireless network, and then connect my other computer to it through ethernet. My netbook is dual boot XP and Ubuntu (think Ubuntu is a version behind) and I would be fine to set up this sharing in either and just leave it on as a repeater station. My other computer is dual boot XP and Fedora and I would prefer this work to allow me to have network in both. I have a straight-through cable and have verified that my network card supports the automatic crossing over behavior.
View 1 Replies View RelatedI just upgraded my Ubuntu Server from 10.04 to 11.04. I am having issues with the ethernet connection upon boot. The connection will blink slowly and not stay connected to the network. If I then unplug the ethernet from the switch and then replug it in, eth0 will get a steady connection, at which point I have to run the following command to get everything working.
Code:
sudo dhclient eth0
After running the command I have no issues with the ethernet connection.
lshw -C network
Code:
*-network:0
[Code]...
I have installed ubuntu 10.10 on a hand me down computer and put a new network card in it (planet ENW 9503) i have managed to locate a linux driver for it from planet.com but i have no idea how to get it to work i have tried a few things it says to do in terminal. everything i have looked up needs an internet connection?
View 1 Replies View RelatedI have installed ubuntu 10.10 on a hand me down computer and put a new network card in it (planet ENW 9503) i have managed to locate a linux driver for it from planet.com but i have no idea how to get it to work i have tried a few things it says to do in terminal. everything i have looked up needs an internet connection?
View 9 Replies View RelatedSo I have been struggling to make this happen for a bit and cannot figure it out. I want to communicate directly from my non-GUI Debian to my Puppy Linux PC. I have set up my Puppy PC for direct connection as per the instructions in the network wizard. I need to set up my Debian to do the same.
I have done the
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
in /etc/network/interfaces.
I still cannot ping the Debian machine from the Puppy one. Are there any other steps to the direct connection? (I already have the crossover cable in place)
I have also tried this with both PCs connected to a Netgear router. I CAN connect to the debian machine if it is on the router at the IP I assigned it and the Puppy PC is configured to use the router.
Is there a file I can edit or a process I can turn off? I think it's close I am just not sure what I am missing.
I purchased an EeePc 900HD (ASUS). Installed EeeBuntu_3.0 when I run "lshw -c network". I got a "DISABLE" status for my ethernet connection. In this forum I read that I need to run:
"ifconfig *logical_hardware_name* up"
The "DISABLE" status is gone but still no ethernet connection in the Gnome-NetworkManager.
Unable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies View Related