I restarted my computer, because I tried to switch from Ubuntu to Windows. And then I saw this: SYSLINUX 3.85 (...) "No DEFAULT or UI configuration directive found!".
View 8 RepliesI downloaded SUSE to a directory and copied that to a CD to use for running a trial on a 950 Mhz laptop. The CD does show a directory Boot and the boot directory does contain files. There is also a file named syslinux.cfg which when viewed from MS XP is identified as a configuration file for MS Office Outlook.
On boot attempts from the CD I get the Error message: No default or UI configuration directive found.Do I have an error on the D/L disk or is my proceedure not correct?
I am trying to salvage the contents of my HD. I have tried to install Ubuntu from a CD (I created) and keep getting the error "No DEFAULT or UI configuration directive found!" My OS is Vista Home.
View 6 Replies View RelatedSo I decided to go on and install 10.04 LTS, because it is LTS... I created the live USB as directed on the Ubuntu download page. I download Universal USB Installer and it says USB created successfully. However, when I boot from the USB the error comes up as mentioned in title... The USB has no problems because I installed 10.10 last time from the very same USB. There's nothing wrong with the procedure because I am following the officially suggested method. Also, nothing wrong with partitions because one instance of Ubuntu is installed and was working fine until I tried to install video drivers (long story)...
View 9 Replies View RelatedI get the following error message when attempting to boot: No DEFAULT or UI configuration directive found.
View 1 Replies View RelatedERROR: No configuration file found
No Default or UI configuration directive found!
boot:_
This appears when I try to boot Debian 7.6.0 from my USB drive
I recently decided to install Ubuntu on a couple of computers without CD drives (netbooks), so I followed these instructions to create a bootable flash drive: http:[url].....That worked fine for both netbooks. Now I'm trying to use the same flash drive on a desktop currently running Windows Vista, but get his message when I try to boot from the flash drive:
No DEFAULT or UI configuration directive found!I tried to boot one of the netbooks from the flash drive again and that still works.I'm thinking a BIOS setting.
Syslinux shows the message in the title everytime I try to boot from a 2gb usb drive. I've tried with Xubuntu 10.04 Desktop for i386 and Linux Mint 9, both with Unetbootin and Universal USB Installer, but I'm getting the same error all the time, it's driving me crazy. I haven't tried with other USB sticks or a different PC though, that's next on my list. Below's a dxdiag file for if you need it,
View 1 Replies View RelatedA week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.
I get the following message on my screen.
"ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al
No DEFAULT or UI configuration directive found!
boot: "
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE. I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
Why will none of my mint distros boot from a usb stick on Windows Professional 7N? ]They will boot on other machines and I can run the mint 8/9 in Windows. The error on boot from usb is:" No default or UI configuration found!"
View 5 Replies View RelatedI installed Ubuntu on my PS3. I got a confirmation message that Ubuntu was installed and I needed to restart. When I reboot I get a loading message and everything checks until:
Code:
ps3av_do_pkt: ps3av_send_cmd_pkt() failed (result=-11)
ps3av_do_pkt: failed old:10003 res:-11
EXT2-fs: ps3da1: couldn't mount because of unsupprted optional features (240).
EXT3-fs: ps3da1: couldn't mount because of unsupprted optional features (240).
EXT2-fs: ps3da1: couldn't mount because of unsupprted optional features (240).
mount: mounting non on /dev/pts failed
/init: /init: 923: KBoot loader
No default foot fs was found, or one was found and it didn't contain a message= config file.
[space between root and fs is how I see it]. If no rootfs was found, you can enter the shell here with 'sh'. Exiting will return you to this prompt. In the shell you can mount your rootfs as /mnt/root/.
Reasons this may have happened include:
-No drive with a rootfs was actually found
-Your footfs does not have the correct volume lable of "/"
-Your rootfs is corrupt (use rescue cd to fix this).
Ubuntu 10.04 server 64-bit I was following; The Perfect Server - Ubuntu Hardy Heron (Ubuntu 8.04 LTS Server) - Page 4 [URL] to set up the server on Ubuntu 10.04 and encountered problem on editing /etc/default/syslogd
[Code]....
So im setting up my own server never done it before so should be interesting Im going to install apache but it says in my instructionsFirst thing is make sure you open up /etc/httpd/conf/httpd.conf and at least change the ServerName directiveSo ive found the file, and i managed to open it with hte command ed httpd.conf But it just showed a 5 or 6 digit number.Do i need to edit this and why ?What command should i use to edit? what should i put into this file ? how do i close the file when ive edited it?
View 6 Replies View RelatedI want to pass a directive to all but one or two locations. How do I do that?
Like:
<Location /1>
xxx
</Location>
<Location /2>
[code]...
I used usb_modeswitch but the result was "No default vendor/product found." But usbmod_switch.conf file has all the vendor & product id contained in it. And modeprobe is also not effective. Even Sakis3g script fails to switch my datacard into modem. How to use BSNL Data Card in Fedora 13?
View 1 Replies View RelatedI want to know how does directive ProxyPass and ProxyPassReverse work. If I have an application on an internal webserver running on port 8080 on Lan but I want it to be accessible on internet via Server A which has public IP but firewall (which I do not have control blocks all except port 80).
Code:
Server A -----------------------------------------Server B
Public IP LAN
(Port 8080 blocked)
if I write
Code:
ProxyPass /application http://192.168.1.5:8080
ProxyPassReverse /application http://192.168.1.5:8080
Will the application be accessible outside. Or do I need to contact sysadmin to open 8080 in A in above diagram. Is there any other way to do the same in apache2.
I've customized my ubuntu setup using many themes and icon packs and now have it just the way I like it but every time I create a new user account it resets to the default interface. Is there any way to save the current configuration I have (theme, icons etc.) as default?
View 3 Replies View RelatedI tried to install Ubuntu 10.10 with a USB stick, but when I start the computer with the USB stick I got this:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Boot: I did a MD5SUM of my .iso file and it say "MD5 Check Sums are the same".
I have ubuntu 11.04 few things first: I cant figure out how to get to the x.org configuration, i've searched high and low for it. I looked in the software center and it says i have OpenGL installed, but when i search for OPENGL or x.org in my applications menu, it only gives me available downloads, and nothing to actually open in a window and use. -When I open the additional drivers menu its 100% blank. not 1 driver is listed. -I searched for and downloaded the proprietary ATI driver from the software center, additional drivers menu is still blank, and I can't run Unity now. -I tried to open the ATI Catalyst control panel, and it says the driver is not properly configured, and to run the aticonfig, where is this? i cant find it. None of this is making any sense to me. I've been reading forum posts and numerous 3rd party sites for days, and nothing works.
I'm just trying to get my laptop to run EVE. It ran fine when I had windows on here. All of my problems with it seem to be stemming from my Graphics, and I cant seem to figure out how to fix it. It seems that every fix I can find, doesnt work on my laptop, and many of the control panels people point to as a resource to fix a problem, I either can't find them, or they are not populated the way they should be. I hate to say it, but if I can't get this issue resolved, I may have to turn back to Windows, The main reason I even have this laptop is to play games when I'm not at home...and I cant do that....all i can use it for ATM is music and internet...
I made a bootable USB flash drive for ubuntu 11.04 32bit. I went to the setup and setup the booting option to USB drive. Now I am trying to boot from USB drive it give an error message:
SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI counfiguration directive found!
boot: _
GNU assembler 2.17 And without having to prefix them. I'm skimming through as info page and can't find any pseudo operator or assembler directive of this type. E.g. 74 would be a decimal number. But I want it to be hexa 74 without the need to write 0x74.
NOTE: as is the GNU assembler.
EDIT: Google led me to discover this:
Quote:
If you write numbers without an explicit indication of the base, the most recent `.RADIX S' command determines how they are interpreted. However, on the one hand, it says the most recent and, on the other one, it applies to GASP, the GNU assembler preprocessor. IDK if it is the same as as (the GNU assembler).
I would appreciate it if someone could post the default configuration for this particular file:
usr/lib/libreoffice/program/sofficerc
It should be the default on your system if you did not change the splash screen.
When trying to boot a USB disk image of either 10.10 or 10.04 I get an error saying that no syslinux configuration file could be found and "syslinux error: No DEFAULT or UI configuration directive found.".
The USB disk was created using the Startup Disk Creator on Maverick.
I'm guessing the second error is just caused by the first, since the syslinux.conf definitely isn't there. Thing is, I've used the 10.04 image before and it's worked fine, so I'm starting to think it's the Startup Disk Creator that's at fault.
I am running a few virtual domains on Apache/Fedora 9. I have some domains working fine but when I tried to put up another one today I get "Directory index forbidden by Options directiveL : /home/jek/www/AAA/" Now here's the weird part. That message appeas in the error log for domain AAA, whereas the new domain is BBB and has it's own log files defined in httpd.conf. On the browser the Fedora test page is displayed. SELinux is turned off.
View 4 Replies View RelatedI'm looking to customize the environment for new users by changing the items in the GNOME menu, change the panel layout, add some shortcuts, and do a few other things. I looked in /etc/skel and there doesn't seem to be anything GNOME related in there; I also tried to put .gconf, .gconfd and .gnome2 from my home directory into /etc/skel and that didn't do what I wanted.
View 5 Replies View RelatedI am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."
Code: Select allsudo /etc/init.d/wicd restart Restarted wicd
Made sure wlan0 is in wicd preferences.
iwconfig:
Code: Select alleth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:"Tell My Wifi Love Her"
Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
lo no wireless extensions.
For some reason my user account was removed from the netdev group? So I readded it...
Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev
Adding user ekarr to group netdev
[code]....
And still, "no wireless networks found" in Wicd.
my system keeps on telling me about an error:
Code: Select allsudo journalctl -p 0..3
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime1.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime2.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime3.ptb.de
A quick check
Code: Select allsystemctl status ntp.service
ntp.service - LSB: Start NTP daemon
Loaded: loaded (/etc/init.d/ntp)
[code]...
3 packets transmitted, 0 received, 100% packet loss, time 1999ms.Same result when using the standard Debian ntp time servers like "server 0.debian.pool.ntp.org iburst" in /etc/ntp.conf.
Installed linux-image-2.6.32-bpo on my laptop today and after the reboot i got "no operating system found" . I'm now typing using a Puppy live cddrom .
View 3 Replies View Related