Debian Configuration :: No Wireless Network Found

Mar 25, 2016

I am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."

Code: Select allsudo /etc/init.d/wicd restart Restarted wicd
Made sure wlan0 is in wicd preferences.
iwconfig:

Code: Select alleth0      no wireless extensions.

wlan0     IEEE 802.11abg  ESSID:"Tell My Wifi Love Her" 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=200 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
         
lo        no wireless extensions.

For some reason my user account was removed from the netdev group? So I readded it...

Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev
Adding user ekarr to group netdev

[code]....

And still, "no wireless networks found" in Wicd.

View 12 Replies


ADVERTISEMENT

Debian Configuration :: Wicd - No Wireless Networks Found?

Sep 1, 2010

I decided to try wireless so I bought a TP-Link pci adapter TL-WN851N and installed it. I installed Wcid and firmware-atheros. I set /etc/network/interfaces to read auto lo iface lo inet loopbackAll Wicd does is tell me "No wireless networks found."

View 14 Replies View Related

Debian Configuration :: Static IP - Network Device Not Found

Oct 11, 2010

My os is debian 5.0, netcard is RTL8168D/8111D. I can't use the Static ip, if I setup static ip, output "not found network device", but the network driver have loaded and if I use DHCP mode everything is ok. do you understand my english? What my next steps should be?

View 7 Replies View Related

Debian Configuration :: Wireless Network Intermittently Reconnects

Oct 24, 2015

For the past week or so, I've had my wireless connection disconnect and reconnect at seemingly random intervals. It can be anywhere from every minute to every hour, whether I'm using the network or not. I don't recall installing anything that could affect this. I'm fairly certain this isn't a hardware issue, since I haven't had any problems when using my Windows partition. I'm using a D-Link USB adapter (DWA-171).

Code: Select alljp@pyrog:~$ more /etc/*-release
PRETTY_NAME="Debian GNU/Linux 7 (wheezy)"
NAME="Debian GNU/Linux"
VERSION_ID="7"
VERSION="7 (wheezy)"
ID=debian
ANSI_COLOR="1;31"

[Code] ....

View 14 Replies View Related

Debian Configuration :: Thinkpad X120e - Wireless Network Down

May 14, 2011

My wireless network is down. I got thinkpad x120e, chipset: Realtek RTL8188CE, driver: rtl819ce.

Here is what I did so far:
upgraded to 2.6.38-bpo.2-686
installed firmware-linux-nonfree
Added the firmware file from the repo since it's not yet packaged in firmware-realtek and reloaded the module.
'iwlist sc' shows: 'wlan0 Interface doesn't support scanning : Network is down'
'dmesg |tail -20' shows:
rtl8192ce:rtl92c_download_fw():<0-0> Failed to request firmware!
firmware 0000:04:00.0: firmware_loading_store: vmap() failed

I also tried the following commands:
ifdown wlan0 ; ifup wlan0
ifconfig wlan0 up

Relevant bug: [URL]
Step by step, in case someone is interested:
add to sources.list: deb [URl] squeeze-backports main
aptitude update
sudo aptitude -t squeeze-backports install linux-image-2.6.38-bpo.2-686
install this package: [URL]
get the first file: [URL]
add to driver:
mkdir -p /lib/firmware/rtlwifi
mv rtlwifi_rtl8192cfw.bin /lib/firmware/rtlwifi
modprobe -r rtl18192ce; modprobe rtl18192ce; dmesg | tail -20

View 3 Replies View Related

Debian Configuration :: Wireless Not Working After Sqeeze Update Of Network?

Feb 9, 2010

I've been enjoying wireless for a long time on Squeeze (iwl3945) with KDE, but the recent network manager update stopped that. I've tried a few things, like going back to /etc/network/interfaces and ifup wlan0 that I use with Lenny, but still not working.

View 14 Replies View Related

Debian Configuration :: Configuring Wireless Network With Rt2870sta Driver?

May 14, 2011

I've been following this guide for squeeze: [URL] After getting the wireless-tools and firmware-ralink packages installed with no internet, I managed to installthe driver using modprobe rt2870sta (the 4th step). With the module loaded and the device plugged in (a RangePlusWireless Network USB Adapter with the WUSB100v2 chipset), iwconfig returned something like

[code]....

and then ifconfig wlan0 up returned ERROR while getting interface flags: no available device

View 14 Replies View Related

Debian Configuration :: Wireless Stops Connecting After Update To Network Manager

Mar 30, 2011

I am currently using Debian Testing, managing my wireless connection with NetworkManager and the Gnome nm-applet. Both have just been updated: network-manager from 0.8.1-6+squeeze1 to 0.8.2-6 and network-manager-gnome from 0.8.1-2 to 0.8.2-4.On installation of the new packages, I have no problems. However, on a reboot, I can no-longer connect to any wireless connection. I am not prompted on start-up for the password to unlock the Gnome keyring and when I left-click on the nm-applet icon and then click on a network to connect to it, nothing happens.I do not think this is a driver or NetworkManager daemon problem. If I run "nmcli dev wifi" or left-click on the applet icon, NetworkManager seems to scan for wireless networks properly and returns a list including the one I wish to connect to.

View 9 Replies View Related

Debian Configuration :: No Longer Connect To The Wireless Network After Squeeze Upgrade

Apr 17, 2011

I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked

$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860

Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.

[Code]...

View 7 Replies View Related

Debian Configuration :: Using Azio Wireless PCI Adapter (Network Controller: RaLink Device 0701)

May 3, 2010

using this Azio Wireless PCI Adapter[URL] (Network controller: RaLink Device 0701)

View 11 Replies View Related

Ubuntu Networking :: Wired Network Configuration - Server Can't Be Found At The Given Address In Firefox

Sep 11, 2010

My father has configured his network and the computer has connected to the wired network. The problem is firefox says the server cant be found at the given address. The wired router says its connected to the network and yet firefox doesn't see the router admin page or network.

View 3 Replies View Related

Debian Configuration :: Systemd - NTP Host Name Not Found

Apr 14, 2016

my system keeps on telling me about an error:

Code: Select allsudo journalctl  -p 0..3
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime1.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime2.ptb.de
Apr 14 10:36:11 debian ntpd_intres[682]: host name not found: ptbtime3.ptb.de

A quick check

Code: Select allsystemctl status ntp.service
ntp.service - LSB: Start NTP daemon
   Loaded: loaded (/etc/init.d/ntp)
   
[code]...

3 packets transmitted, 0 received, 100% packet loss, time 1999ms.Same result when using the standard Debian ntp time servers like "server 0.debian.pool.ntp.org iburst" in /etc/ntp.conf.

View 13 Replies View Related

Debian Configuration :: No Operating System Found?

Feb 20, 2010

Installed linux-image-2.6.32-bpo on my laptop today and after the reboot i got "no operating system found" . I'm now typing using a Puppy live cddrom .

View 3 Replies View Related

Debian Configuration :: Imapd - Mailbox Not Found

May 5, 2010

I'm setting up the Squirrelmail | impad | sendmail combination and so far everything appears in order but I'm getting a 'mailbox not found' error when I log into Squirrelmail. I've eliminated Squirrelmail by using another imap client (Mozilla Thunderbird) and getting the same error. It seems that the problem is with imapd.I've checked the logs and I can see only the successful login entries. Nothing else:

May 5 10:30:19 altair cyrus/imap[2602]: executed
May 5 10:30:19 altair cyrus/imap[2602]: accepted connection
May 5 10:30:19 altair cyrus/imap[2602]: login: localhost [127.0.0.1] john plaintext User logged in

[code]....

View 1 Replies View Related

Debian Configuration :: USB Device Not Found With Libusb?

Sep 24, 2010

I run a program (findknxusb) to scan for devices on USB, but the device is not found.

The debugging level for libusb is on:
$ ./findknxusb
Possible addresses for KNX USB devices:
libusb_set_debug...
libusb: setting debugging level to 1 (on)
libusb_init...

[Code]....

View 1 Replies View Related

Debian Configuration :: BAR 6: No Parent Found Of For Device?

Oct 5, 2010

I installed Debian Lenny on my HP Laptop - dv6-2120ed. Because i have atheros wireless card i needed to install ath9k which is not supported in 2.6.26 kernel so i compiled it to 2.6.32. Everything is good, but when i boot the new kernel i get "Bar 6: No parent found of for device" for 2 devices - the ethernet LAN card and the sound card. After 1 minute waiting the kernel starts booting and everything works fine (the LAN and the SOUND card too). How can i fix this and what means it exactly?

View 2 Replies View Related

Debian Configuration :: Noip2 Package Not Found?

Mar 1, 2011

After the successful installation of debian squeeze 32 bits from the first dvd, I proceeded to try to install the package noip2, but my surprise was not in the repositories that I have, but when used lenny if I had it.Below show my repositories:[URL]I dont know if i need another repository or i am missing one

View 1 Replies View Related

Debian Configuration :: Xen-create-image - Command Not Found

Oct 26, 2015

I have been following the Xen Beginners Guide here: [URL] .....

Everything was going smoothly until I got to the 'Configuring xen-tools and building our guest' section (two thirds down the page).

I installed xen-tools and then typed the following in a terminal window (as root):

xen-create-image --hostname=development-pv-guest --memory=2048mb --vcpus=2 --lvm=develop --dhcp --pygrub --dist=jessie

I admit PV is new to me, compared to simple HVM, so I have a number of questions:

1. Why the command not found error?

2. Should I be booting from the Xen option or regular boot option at the start up screen when creating the xen image? I've tried both and get the same error message.

3. I have Debian 8 (Jessie) installed on my system and I wasn't sure whether I should therefore make this the guest OS in my Xen PV. In asking this question I'm thinking in terms of HVMs - but I assume my Xen PV needs a guest OS of some kind? Or is my host Debian 8 already acting as a guest OS in Xen PV? I'm confused

4. If I do need to install a guest OS, is it better to go for an earlier version of debian - so as not to be so resource hungry?

I'm nervous about screwing up my host debian installation, so when I got the error message, did some research but found nothing meaningful. I don't want to end up having to reinstall my Debian 8 (base OS) ... again!

View 8 Replies View Related

Debian Configuration :: Error: Module Ndiswrapper Not Found

May 23, 2010

I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.

[Code]...

View 1 Replies View Related

Debian Configuration :: Connected To Internet Yet Server Not Found?

Sep 20, 2010

I just reinstalled debian on my computer, I've had it working for a long time, only difference is I used to have Cable Internet and now I use DSL. Anywho, I reinstalled debian from the kde CD on the debian website, it auto-configured my network out of the box. My network is connected to the computer, pinging google works perfectly, and ifconfig shows that eth0 is working correctly without any errors. However on both Konqueror and Iceweasel, every time I try to connect to a website, it tells me the server cannot be found. Basically it acts like I don't have internet. Using the terminal works though, I have installed KDE-FULL from the terminal and wicd, so I know I do have internet. I don't know what it could be, like I said, I installed from the cd and this happened. Maybe there's a bug on the KDE debian cd

View 14 Replies View Related

Debian Installation :: Squeeze On Eee PC From USB - No DEFAULT Or UI Configuration Directive Found

Sep 26, 2010

I get the following error message when attempting to boot: No DEFAULT or UI configuration directive found.

View 1 Replies View Related

Debian Configuration :: No Screens Found (EE) After Installing Nvidia Drivers

Jan 19, 2015

I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...

Here you have my output...

X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck

[Code] .....

View 7 Replies View Related

Debian Configuration :: (GRUB2) Grub_env_find Not Found - Boot Fails

Mar 26, 2010

My evil nemesis Grub2 has decided to make a move on me again! So I rebooted a few minutes ago and got this:

Welcome to Grub
error the symbol 'grub_env_find' not found
Entering rescue mode

View 9 Replies View Related

Debian Configuration :: Syscall_table.S File Not Found In Arch/x86/kernel

Jul 31, 2010

I'm learning about the system calls in Linux, but I was not able to find the syscall_table.S file in the linux/arch/x86/ directory. Are the sources installed by default in Lenny ? Or do we've to install them manually.

[12:12 PM:/usr/src/linux/arch/x86/kernel]$ ls
asm-offsets.s  Makefile

These are the only files in the specified directory. I'm using the stock kernel.

[12:12 PM:/usr/src/linux/arch/x86/kernel]$ uname -r
2.6.26-2-686

View 3 Replies View Related

Debian Configuration :: Getting Network Error - Every Time Rebooting My Server Lost My Network Config

Mar 3, 2011

I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was

Like for example after re-editing my network interface,it was like :

As i did a network restart, i get this error saying :

There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.

What is this error and how can i fix it,because every time im re booting my server i lost my network config.

View 1 Replies View Related

Debian Installation :: Error When Booting - No Default Or UI Configuration Directive Found

Oct 12, 2014

ERROR: No configuration file found

No Default or UI configuration directive found!

boot:_

This appears when I try to boot Debian 7.6.0 from my USB drive

View 1 Replies View Related

Debian Configuration :: Where Hard-disk Power Management Can Be Found In Squeeze

Feb 19, 2010

I am trying to figure out where the harddisk power management can be found in Squeeze. Before it was in the scripts under /etc/acpi, but in Squeeze it's not. I'd like to be able to change the hdparm -B value from 128 to 200 when using battery.

View 3 Replies View Related

Ubuntu :: Can't Reach Wireless Network Configuration

Jan 4, 2010

In Ubuntu 9.10 (fresh install, not an upgrade from 9.04) on an ASUS EeePC 900, I was using wireless networking at home, which worked well. I took the netbook to work a few times and did not using it at home all that period of time. I connected it as a wired network (DHCP) at work, and it "just worked" fine (no configuration was needed). Now I tried to use it at home and wireless no longer works for all users. In System > Preferences > Network connections I can access the wireless configuration and it is still there, still with all the correct settings as worked before. However, in the network manager I access from the upper panel via the antenna icon, it now only lists a Wired network. The wireless network isn't in the list at all. No upgrades were done. I do those from home and tried to do one this morning but since wireless did not work I could not accomplish it.

I could hook it to a wired network, so if fixing this needs to upgrade something, that's doable (but I'd think it should not be needed since wireless did work before). I was going to try things like delete all networks and start again, but since that might lose information about a possible bug, I'm holding off.

View 5 Replies View Related

Debian Configuration :: Grub Drops Into Rescue Mode - Error: File Not Found

Jul 20, 2010

I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.

partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...

View 1 Replies View Related

Debian Configuration :: Network Not Work When Use 2 Network Cards

Oct 24, 2010

I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.

I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.

The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved