General :: No Default Or UI Configuration Directive Found
Nov 15, 2010
I downloaded SUSE to a directory and copied that to a CD to use for running a trial on a 950 Mhz laptop. The CD does show a directory Boot and the boot directory does contain files. There is also a file named syslinux.cfg which when viewed from MS XP is identified as a configuration file for MS Office Outlook.
On boot attempts from the CD I get the Error message: No default or UI configuration directive found.Do I have an error on the D/L disk or is my proceedure not correct?
I am trying to salvage the contents of my HD. I have tried to install Ubuntu from a CD (I created) and keep getting the error "No DEFAULT or UI configuration directive found!" My OS is Vista Home.
So I decided to go on and install 10.04 LTS, because it is LTS... I created the live USB as directed on the Ubuntu download page. I download Universal USB Installer and it says USB created successfully. However, when I boot from the USB the error comes up as mentioned in title... The USB has no problems because I installed 10.10 last time from the very same USB. There's nothing wrong with the procedure because I am following the officially suggested method. Also, nothing wrong with partitions because one instance of Ubuntu is installed and was working fine until I tried to install video drivers (long story)...
I recently decided to install Ubuntu on a couple of computers without CD drives (netbooks), so I followed these instructions to create a bootable flash drive: http:[url].....That worked fine for both netbooks. Now I'm trying to use the same flash drive on a desktop currently running Windows Vista, but get his message when I try to boot from the flash drive:
No DEFAULT or UI configuration directive found!I tried to boot one of the netbooks from the flash drive again and that still works.I'm thinking a BIOS setting.
I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.
I get the following message on my screen. "ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al No DEFAULT or UI configuration directive found! boot: "
Syslinux shows the message in the title everytime I try to boot from a 2gb usb drive. I've tried with Xubuntu 10.04 Desktop for i386 and Linux Mint 9, both with Unetbootin and Universal USB Installer, but I'm getting the same error all the time, it's driving me crazy. I haven't tried with other USB sticks or a different PC though, that's next on my list. Below's a dxdiag file for if you need it,
I restarted my computer, because I tried to switch from Ubuntu to Windows. And then I saw this: SYSLINUX 3.85 (...) "No DEFAULT or UI configuration directive found!".
A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE. I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
Why will none of my mint distros boot from a usb stick on Windows Professional 7N? ]They will boot on other machines and I can run the mint 8/9 in Windows. The error on boot from usb is:" No default or UI configuration found!"
So im setting up my own server never done it before so should be interesting Im going to install apache but it says in my instructionsFirst thing is make sure you open up /etc/httpd/conf/httpd.conf and at least change the ServerName directiveSo ive found the file, and i managed to open it with hte command ed httpd.conf But it just showed a 5 or 6 digit number.Do i need to edit this and why ?What command should i use to edit? what should i put into this file ? how do i close the file when ive edited it?
I used usb_modeswitch but the result was "No default vendor/product found." But usbmod_switch.conf file has all the vendor & product id contained in it. And modeprobe is also not effective. Even Sakis3g script fails to switch my datacard into modem. How to use BSNL Data Card in Fedora 13?
The issue is I screw up my smb.conf by SWAT and I want now the default configuration with all comments back. I try:apt-get remove --purge samba > it leaves the default configuration in samba/ directorythe other way is to download source package....apt-get source sambaIs there some other quicker way how to get the default smb.conf file back?Yes but on Debian 5.0:I uninstall samba.Remove samba/ dir.Install samba.I'm unable to bring up nmbd daemon UP - missing samba/ dir with smb.conf. I create samba/ dir with smb.conf and nmbd is fine!
I have installed latest Nagios and Nagios plugins. Nagios is working properly, but when I go to the browser n write the www.server-name.com/nagios, it gives Not Found The requested URL /nagios/ was not found on this server. How can I tell Apache to open Nagios on adding /nagios in my URL.
I have been doing some customization to my ubuntu Box related to font settings. Now all the font settings for whole system have been badly scrambled. I am feeling it very hard to reset all the settings too default again.I have been modifying system---> Preference ---> Appearance. if there exists any way to reset my font configuration to default.
I'm totally new to linux and a more experienced friend advised me to install slackware if I want to get the best possible understanding of how linux works. I've installed slackware but having logged in as root, when I type the command "startx" to load the GUI I get this error message:
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 24 14:40:24 2010 (==) Using config file: "/etc/X11/xorg.conf" (EE) intel(0): Given depth (4) is not supported by I830 driver (EE) intel(1): [drm] failed to set drm interface version. (EE) intel(1): Failed to become DRM master.
Is it safe to connect a computer running a freshly installed ubuntu desktop edition directly to the internet? Or do I need to actively configure a firewall before connecting it?
I installed Ubuntu on my PS3. I got a confirmation message that Ubuntu was installed and I needed to restart. When I reboot I get a loading message and everything checks until:
Code: ps3av_do_pkt: ps3av_send_cmd_pkt() failed (result=-11) ps3av_do_pkt: failed old:10003 res:-11 EXT2-fs: ps3da1: couldn't mount because of unsupprted optional features (240). EXT3-fs: ps3da1: couldn't mount because of unsupprted optional features (240). EXT2-fs: ps3da1: couldn't mount because of unsupprted optional features (240). mount: mounting non on /dev/pts failed /init: /init: 923: KBoot loader
No default foot fs was found, or one was found and it didn't contain a message= config file. [space between root and fs is how I see it]. If no rootfs was found, you can enter the shell here with 'sh'. Exiting will return you to this prompt. In the shell you can mount your rootfs as /mnt/root/.
Reasons this may have happened include: -No drive with a rootfs was actually found -Your footfs does not have the correct volume lable of "/" -Your rootfs is corrupt (use rescue cd to fix this).
Ubuntu 10.04 server 64-bit I was following; The Perfect Server - Ubuntu Hardy Heron (Ubuntu 8.04 LTS Server) - Page 4 [URL] to set up the server on Ubuntu 10.04 and encountered problem on editing /etc/default/syslogd
I want to know how does directive ProxyPass and ProxyPassReverse work. If I have an application on an internal webserver running on port 8080 on Lan but I want it to be accessible on internet via Server A which has public IP but firewall (which I do not have control blocks all except port 80).
Code: Server A -----------------------------------------Server B Public IP LAN (Port 8080 blocked) if I write Code: ProxyPass /application http://192.168.1.5:8080 ProxyPassReverse /application http://192.168.1.5:8080
Will the application be accessible outside. Or do I need to contact sysadmin to open 8080 in A in above diagram. Is there any other way to do the same in apache2.
GNU assembler 2.17 And without having to prefix them. I'm skimming through as info page and can't find any pseudo operator or assembler directive of this type. E.g. 74 would be a decimal number. But I want it to be hexa 74 without the need to write 0x74.
NOTE: as is the GNU assembler.
EDIT: Google led me to discover this:
Quote:
If you write numbers without an explicit indication of the base, the most recent `.RADIX S' command determines how they are interpreted. However, on the one hand, it says the most recent and, on the other one, it applies to GASP, the GNU assembler preprocessor. IDK if it is the same as as (the GNU assembler).
I am running a few virtual domains on Apache/Fedora 9. I have some domains working fine but when I tried to put up another one today I get "Directory index forbidden by Options directiveL : /home/jek/www/AAA/" Now here's the weird part. That message appeas in the error log for domain AAA, whereas the new domain is BBB and has it's own log files defined in httpd.conf. On the browser the Fedora test page is displayed. SELinux is turned off.
I've customized my ubuntu setup using many themes and icon packs and now have it just the way I like it but every time I create a new user account it resets to the default interface. Is there any way to save the current configuration I have (theme, icons etc.) as default?
I am running Jessie 8.3 and wireless in Wicd has stopped working for me, displaying "No Wireless Networks Found."
Code: Select allsudo /etc/init.d/wicd restart Restarted wicd Made sure wlan0 is in wicd preferences. iwconfig:
Code: Select alleth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:"Tell My Wifi Love Her" Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry short limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off
lo no wireless extensions.
For some reason my user account was removed from the netdev group? So I readded it...
Code: Select allekarr@fidelio:~$ sudo gpasswd -a ekarr netdev Adding user ekarr to group netdev
3 packets transmitted, 0 received, 100% packet loss, time 1999ms.Same result when using the standard Debian ntp time servers like "server 0.debian.pool.ntp.org iburst" in /etc/ntp.conf.
Installed linux-image-2.6.32-bpo on my laptop today and after the reboot i got "no operating system found" . I'm now typing using a Puppy live cddrom .
I'm setting up the Squirrelmail | impad | sendmail combination and so far everything appears in order but I'm getting a 'mailbox not found' error when I log into Squirrelmail. I've eliminated Squirrelmail by using another imap client (Mozilla Thunderbird) and getting the same error. It seems that the problem is with imapd.I've checked the logs and I can see only the successful login entries. Nothing else:
May 5 10:30:19 altair cyrus/imap[2602]: executed May 5 10:30:19 altair cyrus/imap[2602]: accepted connection May 5 10:30:19 altair cyrus/imap[2602]: login: localhost [127.0.0.1] john plaintext User logged in
