Ubuntu Networking :: Update Drivers In 10.10 - Fedora 14 Using Same Version?
Dec 11, 2010
I've got an Atheros AR5001 Wireless Network Adapter and it works perfectly in Ubuntu 9.04 to 10.04, but when I upgraded to Ubuntu 10.10 I had to restart my computer several times before the wireless card would start and I would be able to connect to any networks? I then changed to Fedora 14 and the problem was also present so I assumed the problem was my wireless card and not the operating system. However I recently wondered if it was the OS again and went back to 10.04 and my wireless card works flawlessly again. So I'm wondering if there was an update to the drivers in Ubuntu 10.10, and I assume Fedora 14 using the same version? How would I be able to see if they did change? And how would I be able to use the version of the drivers in Ubuntu 10.04 in 10.10 if it is the drivers what changed?
View 1 Replies
ADVERTISEMENT
Feb 16, 2011
I just rebooted my netbook after updates this last week and notices the wireless is broken now. The updates updated my kernel and wl modules. I'm using a broadcom 43224 driver.If i reboot to the older kernel the wireless works.
View 5 Replies
View Related
Sep 11, 2009
I have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
View 2 Replies
View Related
Jan 2, 2011
I bought new laptop (VOSTRO 1015) with defalut ubuntu 8.1 linux OS. i need to instal latest ubuntu version, is it possible to override old version with new version if i can over ride old version is there any problems with my laptop.When i palyed MP3 and Videos in movie player one pop message was displayed codec are not available , ubuntu version is out dated.i need to instal latest ubuntu with audio and video drivers
View 2 Replies
View Related
Dec 19, 2009
There's a new version of ATI driver (9.12) Is it compatible with Fedora 12?
View 14 Replies
View Related
Mar 9, 2010
I have been searching for ages for graphics drivers for my ATI Mobility Radeon HD 4650 graphics card. I have several software that need hardware accelerated 3D. I found several threads that deal with this issue, but none of them seems to help. I tried the following:
[code]...
I rebooted after each one and I still cannot get any hardware accelerated 3D; it is as if I installed nothing.
View 3 Replies
View Related
May 9, 2011
after few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
View 5 Replies
View Related
Nov 5, 2010
The actual nvidia driver version (260.1912) does not work for my laptop (a Sony Vaio F11 series type, see bottom of page [URL]), I would like to install an older version (e.g. 256.53). Up to now, I cannot figure out how to tell yum to pick up an older version. Is there a way to do this (because kmod-nvidia is a meta package, there may be problems?), or do I have to install 256.53 manually (using the installer provided by nvidia)?
View 11 Replies
View Related
Feb 15, 2009
I've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
View 14 Replies
View Related
Jun 20, 2010
I was told by my security officer that I must remove SSL 2.0 and start using version SSL 3.0 due to security vulnerability. I don't even know how I can check on the current version, let alone upgrading to the current version we're running.
Here's what rpms are loaded on my server:
openssl-devel-0.9.7a-43.17.el4_6.1
xmlsec1-openssl-1.2.6-3
docbook-style-dsssl-1.78-4
mod_ssl-2.0.52-41.ent.2
openssl-0.9.7a-43.17.el4_6.1
openssl-devel-0.9.7a-43.17.el4_6.1
xmlsec1-openssl-1.2.6-3
openssl096b-0.9.6b-22.46
openssl-0.9.7a-43.17.el4_6.1
View 2 Replies
View Related
Sep 29, 2010
What happens if you get an update for an older version kernel when you are using a new version?
View 3 Replies
View Related
Sep 13, 2010
Howto update firefox to version 3.6.9 in F13?
command 'yum info firefox' shows only Firefox 3.6.7 is available.
View 14 Replies
View Related
Apr 18, 2010
First of all after installing i was not able to update my fedora 12 using the GUI version.Ultimately i have done the updation using
su -
yum update
after updation my boot menu changes as
Fedora (2.6.32.11-99.fc12.x86_64)
Fedora (2.6.31.5-127.fc12.x86_64)
Others
[Code].....
View 3 Replies
View Related
Mar 13, 2009
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
View 4 Replies
View Related
Aug 6, 2009
I ran an update yesterday ( like i do most days ) and now my dual screen doesnt work and when i load the nvidia conrol panel it says to run a command as root ( summat liek nivida-xorg ) it then does something tomy xorg that then completely breaks it.
I havent made any changes other than the update.
How do i get nvidia installed properly again?
Im currently running on a strange screen with 2 black lines on the sides and a bad res.
I fear its borked it royally?
View 4 Replies
View Related
Jun 17, 2011
I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
View 2 Replies
View Related
Sep 10, 2009
After new kernel update I noticed that I have 2 different versions of 1 kernel installed.
Kernels are:
2.6.30.5-43.fc11.i686.PAE (this one I use because previous kernels are all .PAE)
and
2.6.30.5-43.fc11.i586
Should I now expect any problems with later kernel releases or can I leave it this way? I boot in the .PAE kernel.
View 14 Replies
View Related
Apr 29, 2011
I have a system with one 2.6.35 kernel, one 2.6.38 kernel I built from a koji src rpm and 1 rawhide 2.6.39 kernel I installed directly with yum. Now that a newer 2.6.35 is out, I'd like to yum update my 2.6.35 kernel so I'll have those two in the 2.6.35 range. But the problem is those newer kernels (38 and 39) make yum think there's no update that's available because they have higher version numbers than the new 2.6.35.12-90 kernel. Is there someway I can make yum update to 2.6.35.12-90 anyway? I was thinking I could download the kernel and kernel-devel rpm files for 2.6.35.12-90 and do the yum install for them off the hard drive, would that work?
View 2 Replies
View Related
Apr 10, 2009
Today was an update for the xine-lib-extras-freeworld, version 1.1.16.3. My current version is 1.1.16.2 Kpackagekit and Yum both give an error message when trying to update:
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package xine-lib-extras-freeworld.x86_64 0:1.1.16.3-1.fc10 set to be updated
--> Processing Dependency: xine-lib(plugin-abi)(x86-64) = 1.26 for package: xine-lib-extras-freeworld
--> Finished Dependency Resolution
[Code]...
View 1 Replies
View Related
Sep 11, 2009
I have fedora versions
2.6.30.5-43.fc11.x68_64
2.6.29.6-217.2
2.6.29.4-167
loaded on my system. Version 2.6.30.5-43 hangs after the progress bar completes with messges labeled r8169 about the ehternet link status. Version 2.6.29.6-2317.2 boots just fine. How do I remove version 2.6.30.5-43 from the system?
View 9 Replies
View Related
Oct 13, 2009
I want to update Bleachbit from the program website, latest version. But get the following ( The name org.freedesktop.PackageKit was not provided by any .service files ) this is good from a security standpoint. But this decision, I would personally take.
View 14 Replies
View Related
Mar 28, 2011
After I enter command: # yum update I got a output like below, and I don't know how to deal with it, i am a newbie.
[code]...
View 2 Replies
View Related
Oct 16, 2010
I am using Fedora 11 and I was curios if it is posible to update gnome to a newer version without upgrading Fedora.
View 2 Replies
View Related
Jun 16, 2010
that my video and wifi driver dont work after my last update..Update:Quote:
#
Jun 16 00:29:25 Updated: libudev-151-10.fc13.x86_64
Jun 16 00:29:27 Updated: libgudev1-151-10.fc13.x86_64
[code]...
View 14 Replies
View Related
Jul 7, 2011
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
View 4 Replies
View Related
Dec 11, 2010
I've followed some instructions to patch, compile & install the ALSA git repository in order to make my M-Audio Fast Track Ultra to work properly. After installing and rebooting there is no sound and in fact, in the hardware tab in Sound Preferences there's no device shown. The problem exists only when I boot using the 2.6.35-23-generic kernel. When I boot using the 2.6.35-22-generic kernel there's no problem at all and I can still use my on board sound card (listed as Internal Audio in h/w tab), which was what I was using before installing the patched drivers.
Is there a way to restore the original 1.0.23 ALSA Driver? I tried compiling from source but I get compile errors. Also I've taken a backup of the /etc/ directory -among others- before installing, if that's any use.
if that's any use to you:
in 2.6.35-23
Code:
$ aplay -l
aplay: device_list:235: no soundcards found...
Code:
$ sudo lshw -c sound
*-multimedia UNCLAIMED
description: Multimedia audio controller
[Code]....
View 7 Replies
View Related
Aug 2, 2010
I have used Linux off and on over the years and had to go back to windows because of a problem I could not solve. That is no longer true and I have been using Linux (Ubuntu) for the last year or so and I consider it superior to other OS'S and a BIG thanks to all who contribute to make it so great and free. My question is that on some versions of Ubuntu some hardware might work fine(or an package for that matter)and in the next version it might not work. Are new drivers required for every new version? Do all driver work for all versions of Linux using the same kernel?
View 1 Replies
View Related
Jun 27, 2010
I've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies
View Related
Sep 10, 2015
According to this link [URL] , I should be able to install the package through experimental on Jessie.
View 9 Replies
View Related
Jul 9, 2010
Im having some issues installing the ATI Radeon Drivers. The card is a Radeon 9550
Code:
openbox millsm # sh /home/millsm/ati-driver-installer-9-3-x86.x86_64.run
Created directory fglrx-install.k7SnEv
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.593
ATI Technologies Linux Driver Installer/Packager
which: no XFree86 in (/sbin:/bin:/usr/sbin:/usr/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-sabayon; make sure that the version is being correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.k7SnEv this is the current
Code:
>> @@ Package: x11-drivers/xf86-video-ati-6.13.0 branch: 5, [repo_sabayonlinux.org]
>> Available: version: 6.13.0 ~ tag: NoTag ~ revision: 2
>> Installed: version: 6.13.0 ~ tag: NoTag ~ revision: 2
>> Slot: 0
>> Homepage: [URL]
>> Description: ATI video driver
>> License: MIT
Code:
openbox millsm # emerge -av x11-drivers/ati-drivers
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
These are the packages that would be merged, in order:
Calculating dependencies... done!
emerge: there are no ebuilds to satisfy "x11-drivers/ati-drivers".
* IMPORTANT: 2 news items need reading for repository 'gentoo'.
* Use eselect news to read news items.
openbox millsm #
Distro is Sabayon 5.3G
View 1 Replies
View Related
