Fedora X86/64bit :: Update For The Xine-lib-extras-freeworld, Version 1.1.16.3?
Apr 10, 2009
Today was an update for the xine-lib-extras-freeworld, version 1.1.16.3. My current version is 1.1.16.2 Kpackagekit and Yum both give an error message when trying to update:
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package xine-lib-extras-freeworld.x86_64 0:1.1.16.3-1.fc10 set to be updated
--> Processing Dependency: xine-lib(plugin-abi)(x86-64) = 1.26 for package: xine-lib-extras-freeworld
--> Finished Dependency Resolution
Downloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
Setting up Install Process Resolving Dependencies ---> Running transaction check ---> Package perl.i386 4:5.8.8-18.el5_3.1 set to be updated ---> Package perl.x86_64 4:5.8.8-27.el5 set to be updated .....
When I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
I have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
i am trying to install the extras of anjuta which are v.2.3.2 but the current version supported from synaptic packet manager is only 2.3.0.. what can i do ? Is there a repository that has anjuta 2.3.2 for ubuntu ? Or anywhere i can find the extras for 2.3.0? if yes then give me the complete link to add to sources.
I have Fedora 11 installed on two different machines, one 32 bit and the other 64 bit. If I play an mp3 file in the 64 bit system---it doesn't seem to matter which player I use---then I can only start, stop, or go to the beginning or end of the selection. I can't advance the stream to some intermediate point. The slider display showing the position is greyed out. The same programs on the same file in the 32 bit system work normally and allow me to advance the position by using the mouse with the slider. This may have something to do with how gnome is configured on the two machines, but I can't figure out what is different.
I have a 64 bit version of fedora 13. I've been trying to install adobe flash and I've tried a couple of different guides and none of them worked for me can anyone give me better instructions?
Im trying to install iseriesaccess for linux. I've had to use the i386 version and the 64bit says it has not 5250 emulator which is the reason im installing it. I have had a good look and cant get it to solve these dependencies. Has anyone else tried and got this working?
[ltodd2@zeus Downloads]$ rpm -ivh iSeriesAccess-5.4.0-1.6.i386.rpm error: Failed dependencies: libodbcinst.so.1 is needed by iSeriesAccess-5.4.0-1.6.i386 libodbc.so.1 is needed by iSeriesAccess-5.4.0-1.6.i386 libstdc++.so.5 is needed by iSeriesAccess-5.4.0-1.6.i386
I have just installed Slackware 13.1 32bit. My hardware is a P-4 3Ghz with a gig of ram. Intel on board graphic and sound.
This is the best implementation of Kde I have used so far. Slack 13.1 is amazing. The install went very well and everything we configured properly.
My problem is when I start Kde or try to shut dowm or logout I get the same error for knotify: Unable to use the Xine Multimedia Backend:Could not find plugin 'Xine' for application 'Knotify'
I get this same error with the application name at the end of it. If I open amarok I get the same error message with amarok at the end. If I try to click a misic file in dolphin same error message.
When I try to shut down or log out from menu I get the xine error and nothing happens. The only way I can log out is Ctrl+Alt+Backspace to get to the KDM log in screen and then I am able to shut down from the menu.
I have been looking on the forum and using google but have found nothing useful.
The error pops up when I try to play a cd or music on the hard drive.
I have been using for over a year now, my 64-bit computer first with Fedora 8 and now with Fedora 10 with 2Gb of RAM just fine. Today I purchased an extra 2Gb for the system and upon installation from the GRUB screen Fedora 10 simply won't boot. It does boot with 3Gb, and it doesn't matter which stick I use for the 3Gb configuration, or what slot do I put the sticks into the motherboard, however if I place the four sticks, F10 simply won't boot. Should I pass a command line argument tot he kernel? If so, which?
I just lost the sound to Xine after updating Hardy. It works fine otherwise and I have sound with Totem and VLC so it would seem to be a Xine-only problem.
I have F10 x86_64 installed on my desktop. When I update the packages, everything works well, except curl-7.19.4-6.fc10.x86_64 which conflicts with the installed curl-7.18.2-6.fc8.i386 (Fedora 8!). The problem seems to be that my repo list does not have the info about the F10 i386 repository. This is the report from "yum repolist"
------------------------------------------------------ Loaded plugins: refresh-packagekit repo id repo name status adobe-linux-i386 Adobe Systems Incorporated enabled: 17 fedora Fedora 10 - x86_64 enabled: 14,303
[code]...
I don't want to simply remove the f8.i386 package, because it'll take away a lot of other i386 packages that I'm sure I'll miss in the future (nspluginwrapper- .3.0-2.fc10.i386).
The other solution seems to be updating the curl-***.i386 package. However, I'm somewhat embarrased to confess that I don't know where to find the repository information...
Due to this thread -> [URL] we discovered that my Fedora runs rc kernel. After several tries to update to stable one, no result came. I need your guidance to update my system.
What I tried: yum update yum update kernel yum clean all
The result is the message: [root@dimitris ~]# yum update kernel Loaded plugins: langpacks, presto, refresh-packagekit Setting up Update Process No Packages marked for Update
Can I update to PAE kernel? This question is for i686 cause it cannot recognize all ram (4GB total, 3.2GB available). I run x86_x64 but I have this question...
Just did the most recent set of updates late yesterday (kernel and Nvidia). Since the update I cannot get to a login screen - just blinking cursor. In fact the cursor blinks for a bit then disapears only to reappear as if there are repeated attempts to complete a process unsuccessfully.
The update replaced the xorg.conf. I tied a couple of revisions, inlcuding replacing it with the earlier working xorg.conf. No luck.
Hardware is MSI K9N6GM board with Nvidia Geforce 6100 nforce 430.
I've tried the "yum clean all" option to no avail. When I update either with the GUI or command line, I get this error:
[root@joshhardman ~]# yum update Loaded plugins: refresh-packagekit Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package anacron.x86_64 0:2.3-78.fc11 set to be updated ---> Package binutils.x86_64 0:2.19.51.0.14-1.fc11 set to be updated ---> Package crontabs.noarch 0:1.10-30.fc11 set to be updated ---> Package genisoimage.x86_64 0:1.1.9-6.fc11 set to be updated ---> Package icedax.x86_64 0:1.1.9-6.fc11 set to be updated ---> Package shadow-utils.x86_64 2:4.1.4.1-5.fc11 set to be updated ---> Package wodim.x86_64 0:1.1.9-6.fc11 set to be updated --> Finished Dependency Resolution .....
Can I not have the 64 bit and 32 bit packages installed at the same time?
After the last update this morning, which involved, among other things, the updated version of the linux kernel, upon rebooting, the computer froze at the fedora logo.
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
My main systems runs Fedora 14 x64 with the latest updates (I can't check anymore, but I believe it has the .13.91 x64 kernel). Since this afternoon it became unsuable. First, Opera Browser crashed and the crash report app of the browser showed up. Clicking one of the options there resulted to X crash, if I understood what really went on. No input, mouse or kb, I couldn't go to tty etc. I had to do a hard reset. Next boot proceeded normally up to the point that GNOME desktop is fully loaded. ABRT began reporting numerous kernel oops. Rebooted again (noticed that init.d fails, so hard reset again) and tried past two kernel versions, same results. Yum crashes and so does everything. I tried to revert all recent updates with yum history, but yum crashed.
Last update was May 22, and it updated kmod-nvidia.
Quote:
uname -a Linux innovator 2.6.35.13-91.fc14.x86_64 #1 SMP Tue May 3 13:23:06 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux initial crash Package: kernel
[code]...
before the reboot Opera 11.11 had crashed and it's own bug report tool came up. Clicking the "do not report this error now" option probably crashed X, because the screen went black and no input was possible (no mouse or keybord, so I couldn't go to tty either. Had to do a hard reset) Bug Reports:Kernel oops report was uploaded
One of the numerous crashes Package: kernel Latest Crash:Τρι 24 Μάι 2011 09:19:56 μμ
Currently, I have a problem to run firefox 64bit 3.6 under fedora13 when I watch ...... It requires to update Adobe Flash Player. It seems that there is only 32bit library.
Keep trying update the packages (36 in total) and every time I keep getting this error ERROR with rpm_check_debug vs depsolve: kernel-x86_64 is needed by kmod-nvidia-2.6.26.6-49.fc8-173.14.12-5.fc8.2.x86_64 kernel-x86_64 is needed by kmod-nvidia-2.6.26.8-57.fc8-173.14.12-5.fc8.3.x86_64 Please report this error at [URL]
I was told by my security officer that I must remove SSL 2.0 and start using version SSL 3.0 due to security vulnerability. I don't even know how I can check on the current version, let alone upgrading to the current version we're running.
Here's what rpms are loaded on my server: openssl-devel-0.9.7a-43.17.el4_6.1 xmlsec1-openssl-1.2.6-3 docbook-style-dsssl-1.78-4 mod_ssl-2.0.52-41.ent.2 openssl-0.9.7a-43.17.el4_6.1 openssl-devel-0.9.7a-43.17.el4_6.1 xmlsec1-openssl-1.2.6-3 openssl096b-0.9.6b-22.46 openssl-0.9.7a-43.17.el4_6.1
I just tried to update to kernel 2.6.27.15-170.2.24.fc10 (x86_64) at the suggestion of the gnome update widget, and the process hung. A bunch of other things were updating at the same time, many of which were related to audacity or wine.
I'm not sure just what was being updated, because the option to review which updates are available does not work - when I click on it, nothing happens, but when I take the other choice (install all updates), I take pot luck. It would be nice to be able to choose which programs to update, and to be able to upgrade the kernel independently, but I don't seem to be able to do that at the moment.
